We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Ulma FR 200 The electronic, automatic flow wrapper type ULMA FR 200 has been specially developed to pack a variety of different products in flat bags (flow-pack) or pillow packs. Technical Specifications Model No.: FR 200 Condition: Used (Overhauled by ULMA Germany) Year of Make: 2022 Capacity: Up to 70 packs/minute (depending on film/paper and product properties). Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 2500 mm Features ✅ Stainless steel version ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross sealing except for high products (max. 160mm) Width sealing bar 300mm ✅ Beret system due to the cross-sealing for heavy bowls ✅ Function No product / No bag ✅ Suitab ...
Ulma TSB 300 Fully automatic machine for sealing trays with different materials, e.g. polypropylene, polyethylene, PVC, polystyrene, PET; CPET, aluminium foil, etc. The packaging material used must be compatible with each other. Packaging can be optionally done with or without modified atmosphere exchange. Technical Specifications – TSB 300 Model: TSB 300 Condition: New (fully functional) Year of Make: 2025 Capacity: Up to 18 packs/minute (depending on film and product properties) with inert gas. Packaging type: Tray sealer Machine equipment Length of infeed belt: Free insertion distance 680 mm Tray size 190x144mm Features ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Cut Inside Tool for Tray Size 190 x 144mm ❌ Double film roll holder ✅ Suitable for packaging with inert gas
Ulma VTI 640 Technical Specifications Model: VTI 640 Condition: Mint (fully functional) Year of Make: 2025 Capacity: Up to 20 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for laminated film ✅ Machine prepared for MAP ✅ Format tube for bag width 300mm ❌ Label dispenser ✅Videojet 6330 Printer ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Automatic foil centering ✅ Quick-change system for film with vacuum gluing table and knife ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt increasing ✅ Volume pneumatic filler with tank 200 – 300 litres Documentation & Operation Language (documentation & HMI): German (other languages on request) ...
SALE ONLY WITHIN GERMANY AND AUSTRIA ROTARY TABLE CONCAVE Ø 1200 mm, FOR COLLECTING THE PRODUCTS ON THE DISCHARGE BELT ✅ STAINLESS STEEL FRAME CONSTRUCTION ✅ HEIGHT ADJUSTABLE FROM 810 - 1010MM
SALE ONLY WITHIN GERMANY AND AUSTRIA The ULMA FM 300 automatic flow wrapper has been specially developed to package fresh products with multi-layer films in a modified atmosphere (MAP). This machine produces hermetically sealed pillow-pack tubular bags in pillow format. Ulma FM 30 The ULMA FM 300 automatic flow wrapper has been specially developed to package fresh products with multi-layer films in a modified atmosphere (MAP). This machine produces hermetically sealed pillow-pack tubular bags in pillow format. Technical Specifications Model: FM 300 Condition: Refurbished 2026 (fully functional) Year of Make: 2020 Capacity: Up to 80 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 2135 mm Features ✅ Wash Down Feed Belt in Hygiene Design ✅ Motorized fi ...
Ulma TSA 680 S Automatic machine for closing pre-formed trays of different materials (polypropylene, polyethylene, PVC, polystyrene, PET, CPET, etc.) using thermally sealable films. These are compatible with the trays and produce packaging with or without a protective atmosphere – depending on the customer's requirements. Technical Specifications Model: TSA 680 S Condition: Exhibition Machine Year of Make: 2025 Capacity: Up to 54 packs/minute (depending on film and product properties) with MAP. Packaging type: Tray sealer Machine equipment Length of infeed belt: Free insertion distance 3000 mm Features ✅ 3 meter belt feeder ✅ RFID Access Cards ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ MAP Cut Inside Tool for Trays 227 x 175 or 190 x 144 ❌ Double film roll holder ✅ Vacuum / Gas System (O2 >21% possible) ✅ Vacuum pump Busch ...
Ulma TFS 200 S This packaging machine uses two rolls of film to produce skin packaging automatically. Workflow: • Heating of the bottom film (inside the forming station) • Shapes of the pack • Placing the product in the package • Heating the skin top film (for skin application) • Performing skin vacuum and package sealing • Cutting the package crosswise and longitudinally • Package application • Residual film winding Technical Specifications Model: TFS 200 S Condition: Exhibition machine (fully functional) Year of Make: 2025 Capacity: Up to 18 packs/minute Packaging Type: Skin Packaging Machine equipment Free insertion distance 760 mm Features ✅ Format 420 x 230mm 3.1 ✅ Maximum product height 55mm (25mm overhang) ✅ Adapter for foil mandrels to 6" ❌ Label dispenser ❌ Printers ✅ Busch vacuum pump 160 m3/h integrated ❌ Do ...
Ulma VTC 840 Technical Specifications Model: VTC 840 Condition: Exhibition machine (fully functional) Year of Make: 2025 Capacity: Up to 90 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for mono PE film ✅ Motorized film roll holder (max. film width 830mm) ✅ Headspace Vacuum Version (Tigth Bag) ✅ Format tube for bag width 240 & 310mm ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 830mm) ✅ Cross sealing beam with Easy Teflon Change ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt Documentation & Operation Language (documentation & ...
Ulma FM 300 C X (WASH DOWN VERSION) The ULMA FM 300 C X was developed to package fresh food with barrier film (BDF) in a modified atmosphere (MAP). This machine produces hermetically sealed "pillow packs" that are then shrunk in the hot air tunnel. Technical Specifications Model: FM 300 C X Condition: New Year of Make: 2025 Capacity: Up to 70 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Barrier Shrink Tubular Bag Machine equipment Length of infeed belt: Free insertion distance 2490 mm Features ✅ Machine in wash down version ✅ Motorized film roll holder (max. film width 900mm) ✅ Foil Limit Switches ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Machine suitable for barrier shrink film and laminated film ✅ Cross-sealing bar with double tooth for mono films ✅ Independent eje ...
REF-2476 ULMA ETNA HITECH VERTICAL FORM-FILL-SEAL MACHINE Vertical form-fill-seal machine (VFFS) Manufacturer: ULMA Model: ETNA HITECH 280X Machine no.: 60281145 Year: 2009 Power: 7kW Voltage: 400V Overall dimensions: width 150 cm, length 220 cm, height 200 cm.
REF-2720 ULMA ATLANTA FLOW WRAPPER WITH PHOTOELECTRIC EYE AND DOUBLE SEALING JAW Manufacturer: ULMA Model: ATLANTA Year: 1998 Horizontal flow pack wrapper (HFFS) equipped with photoelectric eye. Double film reel and double sealing jaw. Voltage: 380 V / 50 Hz / 16 A / 3Ph Total power: 3,5 kW Output: up to 250 p/min (depending on film and product) Pneumatic consumption: 50 litres/min; 6 bar Sealing jaw dimensions: 200 x 50 mm (WxH) Overall dimensions: 7,000 x 1,300 x 1,650 mm (LxWxH) Weight: approx. 910 kg
Ulma Stretch Wrapper Model: Super Chik 2 units available, 1996 & 1997 Regularly serviced and maintained Good condition
Used packaging machine made by Ulma, model: TF Optima 416. New: 2000.
REF-0 ULMA SLX-305 L-SEALER WITH TR-100 SHRINK TUNNEL Automatic angular L” sealing machine with shrink tunnel. Manufacturer: ULMA. 1) Sealer model SLX 305: − Year: 2020 − Serial no.: 4515898 − 400 V / 50 Hz / 3.5 A / 3PH − Total power: 2.6 kW − Overall dimensions: 2,400 x 1,500 x 1,720 mm (LxWxH) − Maximum sealing bar dimensions (max. package dimensions): 550 x 550 x 200 mm (LxWxH) − This machine can be used not only for packaging with shrink film (when used together with the shrink tunnel), but also with non-shrink film 2) Shrink tunnel model TR 100: − Year: 2020 − Serial no.: 1511748 − 380 V / 50 Hz / 25 A / 3PH − Total power: 24 kW − Overall dimensions: 2,000 x 1,400 x 1,200 mm (LxWxH) − Chamber length: 1,335 mm − Aperture: 400 x 230 mm (WxH) Overall dimensions of the set: 4,000 x 1,500 x 1,720 mm (LxWxH)
Used thermopacking machine from Ulma, model TF-SUPRA. Year of production 2006. The machine uses two types of foil. The lower foil is plastic and, passing through the forming station under the influence of heat and stretching, takes the shape of the mold, creating a package. Once the foil has cooled, it moves to the loading area where the products are placed into the package, this function can be performed manually or automatically using special assistive devices. After filling the molds, the upper foil is placed above the mold and welded to it, it is possible to simultaneously create a vacuum in the package and fill it with protective gas. Ultimately, the cutting station separates the packages into individual or groups that leave the machine in exactly the condition in which the recipient is to receive them.
Used vertical wrapping machine by Ulma model VTC 700. New 2008. Vertical Fulfillment Wrapping Machine (VFFS) that forms a package with three seals. Designed for continuous packaging at high production speeds of up to 140 cycles/min. The VTC 700 machine is specially designed for continuous wrapping of many different types of products. The machine is extremely flexible in terms of changing the moulding size to allow for different portions and has the versatility to adapt to any type of film. Combine these features with the level of electronics specification and you have one of the most technologically advanced machines available on the market. Standard features: - Stainless steel version. - Servo-driven cross seal jaws (2 servo motors). - Servo driven film transport (2 servo motors). - Open front frame design. - Film spool holders with pneumatic wedges. - One-piece and eas ...
Packaging machine made by ULMA, model Alaska. New 2000. Technical data: -Speed 65 pcs/min. -Electrical power 5 kW, 220/400V, 50/60 Hz. -Pressure 7 bar. -Weight 1200 kg
Ulma TFS700 thermoformer, Good working thermoformer with build in Busch vacuumpump., Available with multiple moulds., - 420mm film width, - 400mm advance, perfect for big bulky packs with the supporting roller conveyor below the bottom film., machine is roughly 6 meters long., STC just acquired this equipment., While we currently received a lot of new stock we didnt find the time yet to do any work to it., Of-course if you are interested we can prioritize to test and inspect, to ensure you will get a 100% working condition machine., If you are interested obviously feel free to contact us so we can gather more information for you.
Ulma Atlanta, High speed flow packing line possible with shrink film and shrink tunnel., Bottom Seal
Ulma Olympus vertical bagging machine, Compact vertical bagger suitable for PE type of films., Plug and play machine immediately available for production.
Ulma PV 350 + 2004 Ulma HRX 400 tunnel These are both round product flow wrappers which have packed predominately swedes (rutabagas) There are two of these lines available. Find more here - / Contact us at -
Height=1.81 m, Overall length= 1.07 m, Overall width= 3.4 m, Net weight= 735 kg,