Vecoplan VTH 65.20.3 Year of construction 2013 Infeed width 650 mm Inlet height 200 mm Motor 55 kW 3 feed rollers in good condition Electrical control cabinet Vibrating trough 650x200x6000 mm
Motor power 11 kW hydraulic dock drawer shaft width 800mm Dimensions of the hopper 80x100 cm 15 mm sieve Square knife shaft with rotating drawer motor power 1.8 KW
Vecoplan shredder, type VAZ 110, built in 2017, with hopper and suction nozzle. A video is available at short notice. Manufacturer: Vecoplan Type: VAZ 110 Year of Make: 2017 Drive: 22 kW Filling opening: 1200 x 1075 mm Rotor diameter: 250 mm Rotor length: 1075 mm Rotor speed: 90-250 rpm Number of cutting tools: 27 Throughput: 2 cbm/h Screen hole size: 20mm Suction nozzle diameter: 200 mm Dimensions: approx. 2355 x 1590 x 980 mm (LxWxH) Weight: approx. 1800 kg Accessories: Spare parts package sieve 20 mm, cutting tools, etc. Materials: wood waste, foils, packaging material, chipboard, paper, textiles Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangeme ...
Vecoplan chipper for sawmill cuttings 45/16/2V - German production - perfect wood chips directly into the furnace - vibro-gutter system TECHNICAL PARAMETERS: - width 450 mm - height 160 mm - number of knives: 2 pieces - engine power 50 kW - rotor diameter 500 mm - rotor length 475 mm - 40 x 40 mm sieve - upper gear shaft pulling 4 kW - lower gear shaft pulling 2.2 kW - reverse - feeding vibrochute 10500 mm x 450 mm - engine power 2.2 kW - transverse vibrochute 4500 mm x 2200 mm - engine power 1.5 kW - height 2450 mm Transport dimensions: 1050cm x 245cm x 245cm weight ~ 4 tons
Vecoplan Shredder Type VAZ 300/250 Year 1996 Previously used for plastic
Chopper, Shredder, Shredder Fabr. Vecoplan Type VAZ 100 / 80 YOC 1994 New engine 18.5 Kw (invoice available) New gearbox (invoice available) Sieve 25 mm with Hydraulic Gate Valve
COMPLETE REFUSE-DERIVED FUEL PLANT WITH HIGH CAPACITY Year of construction 2009 13,500 operating hours - 1 x pre-shredder TYPE VECOPLAN - 1 x Magnet - 1 x air classifier TYPE WESTERIA - 3 x secondary shredder type VECOPLAN - approx. 150 meters of conveyor belts - Electrical control - Spare parts worth approx. € 70 000 Installed capacity approx. 1200 kW Product size 25 to 80 mm according to customer's requirements. We can dismantle the system and load it onto trucks.
Hopper chipper Vecoplan VAZ 700 Yellow Shaft width 700 mm 9/7.5 kw two-speed motor Auto Reverse Hydraulic Drawer Feed inlet 800 x 500 mm Two sieves included Year of Build 2009 Machine weight: 930 kg Machine dimensions: 1900x1500x1900 h mm The chipper is suitable for hardwood and softwood
CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 76900 PLN Net price: 17089 EUR depending on the price 4.50 EUR Net price: 20237 USD depending on the price of 3.80 USD (Prices may vary with higher fl ...
Vecoplan, not Lindner; Single-shaft shredder with feed hopper for refuse-derived fuel production, waste wood, waste and plastics, Material pusher to the rotor in the filling area Removal of contaminants from the pinball system, Screen inserts can be changed to your requirements! New rotor in 2017 with approx. 4000h running time New frequency converter in 2017 New service on the torque motor with 243kW, approx. 12900 operating hours in December 2023 Machine still under construction and available from February 2024 Subject to prior sale!
Shredding plant / chipper / shredder for shredding wood waste - Waste wood waste - Pallets - Packaging material and waste of many kinds Make: VECOPLAN - MASCHINENBAU Type: VAZ 300/180 Silent and slow-running. Propulsion:132. Kw. Rotor width:1800.mm. Rotor diameter:420.mm.(solid steel.) Rotor speed:80-120 rpm Capacity: 1500-2000.kg/h.je by material and task. Tools-knives ( cutting crowns 80x80 mm ) Sieve: 30.mm. round hole reinforced design Hydraulic strainer and rear flap with lowerable counter knife Conveyor belt cut-out 1000.mm. Insertion: approx. 1800 x 3000.mm. Weight: approx. 18.500.Kg. Included: control cabinet system + hydraulic system + operating instructions + electrical circuit diagrams. Dealer price 34.500.00€ net ex location. The machine is in good general condition
Ripper 1 axle, with hydraulic pusher, brand: Vecoplan, rotor measures: 1580x350 mm, die: 40x40, motor: 75 Kw (100 hp), hopper measures: 1580x2200 mm. With electrical panel.
Ripper 1 shaft with hydraulic pusher, brand: Vecoplan, rotor measures: 1600x350 mm, dice: 40x40, motor: 75 Kw (100 hp), hopper measures: 1600x2200 mm. No electrical panel.
ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)
Vecoplan wood shredder for waste wood Inlet cross-section 1300 x 1400 mm Feed capacity per hour 500 to 2000 kg Weight approx. 1900 kg Drive 37 kW
CATALOG NO. 6928 TECHNICAL SPECIFICATIONS - loading hopper inlet 1560x1300mm - rotor working width 1300mm - main engine 36kW - pump motor 2x3kW - number of knives 36pcs - knife size 40x40mm - sieve 30mm, 28mm - pressure drawer - electric autorewers - dimensions of the machine length / width / height 3400x2420x2820mm - control cabinet dimension L/W/H 1000x450x1900mm - dimensions of pumps length / width / height 800x700x850mm - weight about 5000kg ADVANTAGES – German production – for Weima WL 15 – autorewers – pressure drawer – hydraulic pressure drawer from above – improves machine efficiency – very good condition – used chipper Net price: 169900 PLN Net price: 37756EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)
Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg
- German production - autorewers - for the production of technological wood chips - powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - slot width 550 mm - inlet height 260 mm - two knives - engine power 110 kW - conveyor length 5000 mm - sieve 50 x 50 mm - three upper shafts pulling toothed - four lower shafts pulling toothed - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of feed shafts - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t
Shredder Vecoplan, type HR 75/35, for wood, packaging material, bark, wood waste Manufacturer: Vecoplan Type: HR 75/35 Year of construction 1987 Drive: 45 kW Filling opening: 750 x 350 mm Rotor diameter: 700 mm Number of cleavers: 2-4 Chopping length: 5-30 mm Throughput: max. 35 cbm/h Screen hole: 65 mm, 2 x 35 mm Dimensions: approx. 1500 x 1500 x 1400 mm (LxWxH) Weight: approx. 4,400 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or for any errors.
4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)
Vecoplan injection moulding machine Type: VAZ 160/200 SLF Control: PLC Control built year: 2004 Dimensions and weights Dimensions LxBxH m: 3.5 x 3.75 x 2.34 Machine Weight kg: 19,000 Other Inlet length: 1600 mm inlet width: 2000 mm rotor diameter: 640 mm Double number cutting crowns 48 pieces (80 x 80 mm) rotor speed: 148 UpM screen diameter: 120 mm drive power: 250 kW operating voltage: 400 V frequency: 50 Hz throughput: When face, Precrushed and FE-free material for replacement fuel preparation > 12 t/h at heavy goods with a density of 120 kg/m ³ > 5 t/h at lightweight with a density of 80 kg/m ³ with product grain size < 150 mm more than 98% < 30 mm less than 5%.
1 piece of scratch chain foerderer 900/500 mm (W/T) length = 34 m; Very good
1 piece scratch chain foerderer 650/500 mm (W/D) length 38 m; good
Vecoplan injection moulding machine Type: VAZ 200 / 200 SLF control:-year of production: 2003 Dimensions and weights Machine weight kg: 18,000 Other Drive power 132 KW rotor diameter 640mm rotor width 2000 mm speed 120-340 1 / min throughput line about 3000kg / h
Vecoplan S Type: VAZ 300/250 UNF, Shredder Built: 1996 Dimensions and weights Machine weight Kg: 24000 Other Drive power 200 KW Rotor diameter 620mm Rotor width 2491 mm Speed 150 1/min Throughput line about 4000kg/h
Vecoplan Type: VAZ 300/250 UNF, Shredder Built: 1996 Dimensions and weights Machine weight Kg: 24000 Other Drive power 200 KW Rotor diameter 620mm Rotor width 2491 mm Speed 150 1/min Throughput line about 4000kg/h
Vecoplan hacker, type 65/22/5 Technical data: - max. infeed width 650 mm - max. infeed height 220 mm - 3 feed rollers at the bottom - 2 feed rollers at the bottom - with new through rollers - excl. drive motor
VECOPLAN VAZ 220/200 KNF, single shaft shredder for plastics, constructed in 2000, ifeed width 2200 mm, working width: 2000 mm, Rotor Ø 495 mm, n.56 knives size 60 x 60 mm., Rotor speed 125 rpm, 132 kW drive, 400V 50 Hz, Machine weight : about 14 tons, Upper ram, feeding hopper, various screens available, Electrical panel, Users manual, drawings available, This machine is offered reconditioned, width: 2.000 mm. (78.74), Power: 132kw
VECOPLAN BIOMASS SUPPLY INSTALLATION EQUIPMENT, including:, Infeed Hopper with Vibratory Motor, Inclined Sorting Conveyor Belt 600 x 12500 mm, VECOPLAN VAZ 1100 XLS P, 37 kW drive, Rotor Length 1.070 mm., Rotor diameter 370 mm., Chain Conveyor 500 x 500 mm, x approx. 8 m), Metal Detector, Diverter Valve & Chutes, Chain Conveyor 500 x 500 mm x approx. 16 m, Stainless Steel Pump with Piping, Control Panels (3 units), Platform Floors with Stairs and Supports, availability: immediate, conditions: good, installed power - used power in work: about 60-65% : about 50, options available: possible separate sale, type: biomass treatment complete installation
VECOPLAN VAZ 120/105 U, single shaft shredder for wood, cardboard and paper, transport size : LxWxH 2,49 x 1,88 x 1,35 mt., Infeed size 1,2 x 1,05 m., 235 mm rotor Ø, rotor width 1.070 mm, Weight: approx. 2300kg, Rotor speed: 120 rpm, 18,5 kw 34.5A Electric motor with turbo clutch, V-belt drive, 2-stage, spur gearbox, motor speed 1.455 rpm 400V 50 Hz IP54 des.B3, Cobstructed in 1999, few hours worked, offered reconditioned., installed power Kw: 20, AVAILABILITY: 2 weeks
