WALTER WOODTRONIC C5 CNC circular saw sharpening machine was built in 2005. This highly efficient machine is the perfect solution for complete machining of circular saws with a maximum diameter of 710 mm, with teeth of all known geometries. Thanks to its 5 axes, including an automatic B-axis, the grinding process of tooth flank and tooth rake face is performed in a single pass, saving valuable time and increasing work efficiency. The sturdy construction made of high-quality gray cast iron additionally effectively dampens all vibrations and oscillations, which translates into achieving the highest precision and quality of grinding. WALTER WOODTRONIC CNC circular saw sharpener performs machining in the following variants. Grinding of the tooth rake face: – variant 1 – grinding with infeed, outfeed and return in rapid traverse – variant 2 – grinding with infeed in return movem ...
WALTER SKTG 15 S screw compressor was built in 2015. The machine, which combines reliable components, a durable housing with acoustic insulation and an easy-to-use control panel, is an indispensable source for supplying any production facility with top-quality compressed air. The components used in the machine additionally ensure the highest possible energy efficiency throughout its entire service life. The offer also includes a 500 litre compressed air tank. The WALTER screw compressor weighs 510 kg. Technical specifications of the WALTER SKTG 15/10 S compressor - motor power: 15 kW - working pressure: 10 bar - capacity: 117.6 m3/h - drive transmission: belt drive - air connection: R 3/4″ - compressed air tank capacity: 500 l - operating hours: 13000 h - noise level: 70 dB(A) - power supply: 3x 400 V; 50 Hz - weight of machine: 510 kg
Key data: 400 mm
Article number: 27-04-004 Manufacturer: Walter Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 600x600x400mm Weight: approx. 300kg Digital display: 1-axis digital display Heidenhain Encoder: Heidenhain Resolution: 0.001 degree Face plate diameter: approx. 400mm Clamping T-slots: 4 pieces of 14mm each Rod passage: approx. Ø 40mm Indexing: manual via handwheel Quick indexing: Electrically via shaft stump & e.g. cordless screwdriver Max.table load: Vertical: approx. 200kg Horizontal: approx. 500kg Accessories: Complete Instruction Manual Mechanical table clamping 1x ISO 40 tool holder Display Bracket Handwheel for indexing with extra-long shaft stump 2 pieces of eyebolts for lifting the table Other accessories on request Price and other technical data on request
Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
HM Corner - Cutter Head - Face Milling Cutter with Inserts. Diameter: 315 mm. Height: 90 mm Bore diameter: 62 mm. Number of inserts: 18 pieces Dimensions of the inserts: Rectangular, 12.8 x 12.8 x 5 mm, positive. Good used and ready to use, without damage to the panel seats. Shipping possible in consultation with the forwarding agent. or self-collection. The part can be viewed in consultation and is immediately available.
–Manual – CE certificate – after technical inspection – very good condition – year of production 2014 - standard feeding table 3m +3m additional = 6m TECHNICAL PARAMETERS: main motor 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed rate adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls diameter of discs 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor belt three take-up rollers stub diameter 2 x 200 mm dimensions length/width/height 300 x 245 x 180 cm weight ~ 3000 kg
WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg
Oflisiarka WDPP-410 is widely used in many sawmill plants. The design of the machine and the principles of its operation allow for quick reimbursement of purchase costs and reduction of raw material losses to the necessary minimum. The reliability of operation and safe operation of the saw translates into a high performance rate. – Polish production –DTR TECHNICAL PARAMETERS: Min. length of cut pile 600 mm .max. length of cut pile 1300 mm .max. thickness of cut pile 110 mm .max. width of input material 450 mm .max. width of the finished board 150 mm Min. width of the finished board 70 mm circular saw diameter 400 mm Capacity up to 20 m3 right vertical spindle motor power 3,5 kW left vertical spindle motor power 3,5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw motor power 22 kW engine speed (horizontal saw drive) 2850 rpm feed engine speed 1450 ...
– Polish production – DTR, CE – year of manufacture 2011 TECHNICAL PARAMETERS: minimum length of material after formatting 800 mm maximum length of material after formatting 1600 mm maximum material width 480 mm maximum material thickness 145 mm disc diameter 500 mm smoothly adjustable feed 0-20 m/min main motor power 2 x 5,2 kW feed motor power 1.5 kW machine dimensions (L/W/H) 340 / 230 / 180 cm weight 2500 kg
Order No. 6712 TECHNICAL DATA - min. board length after formatting 800mm - max length of the board after formatting is 1300mm - max board width 270mm - max board height 70mm - max diameter of the disc 350mm - shield on the discs (serves as a pressure) - spindle diameters 60mm - length of spindles working part 260mm - main engine power 4kW - feed motor power 0.75kW - 2 feed speeds - dimensions of the table top 1820x15100mm - diameter of the extraction connector 2x100mm - overall dimensions: length / width / height 1900x1900x1400mm - weight 578 kg ADVANTAGES - Polish production - for processing a pallet board - used saw, very good condition Net price: PLN 14900 Net price: EUR 3311 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)
The WALTER SF 37 KS screw compressor was manufactured in 2014 by the WALTER Kompressortechnik brand. The freestanding screw compressor has direct drive and built-in inverter. The compressor is offered as a set with a 3000 dm3 vertical expansion tank and WDFC 396 refrigeration dryer, with an integrated control panel and a built-in filter 1 and 0.01 u. Technical parameters of the screw compressor: - pressure: 10 bar - capacity: 5.8 m3 / min - power: 37 kW - connection: R 1 1/4 - volume: 71 db (A) - weight: 715 kg - length: 1575 mm - width: 1030 mm - height: 1750 mm Technical data of the refrigeration dryer: - capacity: 396 m3 / h - capacity: 6.6 m3 / min - connection: 2 - voltage: 230/1/50 V - refrigerant: R134.a - pressure drop: 120 mbar - working pressure: 16 - built-in 2 micron filters: 1 and 0.01 - dehumidifier weight: 120 kg - length: 750 mm - width: 700 mm ...
Little used and is very well maintained, factory No. 3791, in execution with degree - and indirect sharing using disc of part of. Table size 500 mm diameter Height 150 mm Length 710 mm 590 mm width (without drive) T - slot width 16 mm Gear ratio 1: 120 Weight 180 kg Accessories: Part of disc, operating instructions.
Swivel part ingenous from Walter type HU 150E Peak height is 150mm. Direct divisions via perforated disc possible. Division 1 -24 Haohtcz Indirect sharing is no longer possible, a worm wheel is missing. Use on fraes and drilling machines For more information on request, please note the photos. Special price
1 piece of plan knife head 210 mm 12 Cutting 1 piece corner corner fraeser WALTER 200 mm, F2010 12 cutting Further: Diverse crankshaft fraeser GFM
2 stubof disc sores WALTER 125 mm, F2052 1 stueck prism fraeser Walter F2052-460 170.6 / 171.2 2 piece disc freser WALTER 142 mm, F252-925
Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price
centre height: 100 mm weight of the machine ca.: 30 kg dimensions: 300 x 250 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 500 mm table load: ? t table height: hor. 235 / Sph. vert. mm groove width: 18 mm total power requirement: - kW weight of the machine ca.: 0,270 t dimensions of the machine ca.: 800640235 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for manual cylindrical grinding of all types of shank tools. Accessories: T-slot base, rotation direction switch, retaining ring., Y-axis swivel range: 90 °, tool holder: ISO 50, speeds: 80, 150, 210 rpm, Connected load approx.: 220V / 50Hz, Dimensions W x D x H approx.: 370 x 200 x 340 mm, Weight approx.: 19 kg, colour: green
This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.
Manufacturer: Walter Model: Woodtronic CNC5D Rapide Year of Manufacture: 2004 Find more here - / Contact us at -
table diameter: 500 mm table load: 0,4 t table height: 160 mm total power requirement: 0 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 0,70,80,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: ? mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 400330300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 400 mm table load: 0,2 t table height: hor. 200 / vert. Sph. 310 mm total power requirement: 0 kW weight of the machine ca.: 0,155 t dimensions of the machine ca.: 0,60,530,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: - mm table load: - t table height: - mm Control: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m CNC Swivel Rotary Table/ CNC Dividing Apparatus incl. Tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Indexable insert milling cutters, shoulder milling cutters WALTER Xtra-tec® XT M5130-025-A25-03-09 Cutting diameter: Ø 25 mm Shank diameter: Ø 25 mm, Length: 118 mm Total length: 151 mm without inserts ! New !' Dimensions ( indexable insert milling cutter ): 151 x 25 x 25 mm
centre height: 150 mm chucking diameter: 200 mm indexing: 15 ° groove width: 16 mm weight: 66 kg dimensions of the machine ca.: 550 x 230 x 370 mm - Serial-No.: 2896 - Dividing head can be set up vertically or horizontally - with adjustable counter point - Chuck optionally with 15° graduation, or infinitely variable 360° rotation - chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 100 mm weight of the machine ca.: 30 kg dimensions: 300 x 250 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Insert cutter WALTER F2001-103519 R-F2001-103519 Cutting diameter: Ø 51.5 mm Usable length: 45 mm Total length: 105 mm with new inserts ! used, checked ! Dimensions (insert cutter): 105 x 52 x 52 mm
Insert cutter WALTER F2001-103518 R-F2001-103518 Cutting diameter: Ø 49.0 mm Usable length: 50 mm Total length: 111 mm with new inserts ! used, checked ! Dimensions ( insert cutter ): 111 x 50 x 50 mm
