Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Model
(Manufacturer:

WALTHER TROWAL)

 
other metal working machines / Drying Ovens
date: 17.09.2026
approved
dealer
item-No.: 162748428
New in: 1998 used
approved
Location: fr

Vibratory dryer WALTHER TROWAL G 100 B Year of construction: 1998 Bowl dimensions: Ø 1100 m x height 1100 mm Inside dimensions: width 200 mm x max height 300 mm Motor rotation: 1500 t/min. Motor power: 0,45 kW Max heating capacity: 3 kW In perfect working condition Weight: 250 kg

other metal working machines / Polishing Machines
date: 17.09.2026
approved
dealer
item-No.: 162748390
New in: 1998 used
approved
Location: fr

Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

grinding machines / Finishing Machines (Grinders)
date: 14.06.2026
approved
dealer
item-No.: 162748083
used
approved
Location: de

WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl

other metal working machines / Polishing Machines
date: 28.08.2023
item-No.: 144831262
used
Location: de

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...

other metal working machines
date: 25.05.2025
item-No.: 162711731
New in: 2005 used
Location: de

Mass finishing system with water treatment Total height: 1,193 mm Total weight: 923 kg Total width: 1,485 mm Workpiece weight ( max ): 50 kg Useful volume of the container: 251 l Speed ( max ): 1,500 rpm Internal width: 326 mm Equipment: Infinitely variable speed

date: 24.05.2025
item-No.: 162711393
New in: 1969 used
Price: 5.000 €

Rotary trough vibratory vibratory finishing machine WALTHER TROWAL type CLS-230Kom. No. 05.833/00 Year of construction 1969Trough diameter 1100 mmTrough outer height total approx. 650 mmWorking container / gross volume max. 230 litresUsable volume approx. 115 litresSpeed 1100 to 1800 rpm. infinitely variableMotor power 7.5 kWNecess connection 400 volts, 50 Hz- duty cycle manually and via timer- infinitely variable motor speed via variator gear- manually adjustable eccentric unbalance weights- container with polyurethane lining- soundproofed

date: 24.05.2025
item-No.: 162711449
New in: 1972 used
Price: 14.500 €

Round trough vibration vibratory mass finishing machine WALTHER TROWAL type CLS-980 SAKom. No. 15.207 Year of construction 1972Trough diameter 1850 mmTrough outer height total approx. 1150 mmWorking container / gross volume max. 980 litresUsable volume approx. 490 litresLargest possible workpiece diameter approx. 300 mm (measured diagonally)Screening surface 3400 cm2Speed 1000 to 1700 rpm. infinitely variableMotor power 22 kWNet connection 400 volts, 50 Hz- duty cycle manually and via timer- infinitely variable motor speed via DANFOSS drive controller type VLT

grinding machines / Finishing Machines (Grinders)
date: 26.08.2024
item-No.: 162697394
New in: 2004 used

0: 170 l total power requirement: 2,6 kW weight of the machine ca.: 0,731 t : dimensions of the machine ca.: m charge load: gross working tank volume: 350 liters useful volume: 170 liters largest possible workpiece dimension (measured diagonally): 220mm total weight: 731kg drive power at 1500 rpm: 2,6kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding machines / Finishing Machines (Grinders)
date: 26.08.2024
item-No.: 162698108
New in: 2010 used

0: 165 l motor speeds:: 1500 UpM total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m : charge load: PU-cover with ca. 6mm cover thickness usable volume: 165 liter trough inner measures: 1100mm x 460mm x 525mm empty weight: ca. 850kg motor speed: 1500 rpm sound insulating cabinet extern dimensions: 1900mm x 1250mm x 1550mm band filter device Seitz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

other metal working machines
date: 30.08.2023
item-No.: 157817204
used
Location: ch

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Length: 590 mm Width: 300 mm Tank volume: 42 l Number of speeds: up to: 1500 rpm Installed power: 0.25 kW Machine´s weight about: 251 kg Overall dimensions machine: Length: 730 mm Width: 620 mm Height: 1000 mm

other metal working machines
date: 30.08.2023
item-No.: 157048256
used
Location: ch

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Length: 1000 mm Width: 455 mm Number of speeds: up to: 1400 rpm Appropriated for: deburing Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.25 kW Overall dimensions machine: Length: 1400 mm Width: 800 mm Height: 1650 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)