Model
(Manufacturer: WEINIG)
Key data: 6 , 190 mm, 120 mm
SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)
Weinig Quatromat 23 Moulder Specifications: Brand: Weinig Type: Q23P (profileerautomaat) Year of Make: 2003 M-No.: 99567 Feed table: 2000 mm Dressing table adjustment range: 10 mm Joining ruler adjustment range: 10 mm Planing width: 13 - 230 mm Planing thickness: 6 - 120 mm Thickness adjustment: Manuel with Siko counter Width adjustment: Manuel with Siko counter Head dimension: Min. 613mm, up to max. 120230mm Knife shafts: Bottom: ø125 mm Right & Left: ø125-200mm Top: ø125-200 mm Adjustment range dressing shaft: 5 mm Spindle adjustment range axial: 30 mm Min. Product Length: Short Workpiece Length Equipment Central Control: Relay Control Lubrication: Spindle arrangement: Bottom 4.0 KW Right + Left Spindle 5.5 kW Above 4.0 kW Speed: 6,000 rpm Feed: 8 m/min Stepless -1.5 kW Steel and rubber rollers. 1 feed roller electro-pneumatically cycled ...
Key data: 5 , 120 mm, 230 mm
Planing and moulding machine Profimat 23 E Working width: 230 mm Working height: 120 mm Dressing table length: 2000 mm Spindle arrangement 1: Dressing 5.5 kW, 6000 rpm, 40 mm diameter 2+3 Left+ Right 7.5 kW, 6000 rpm, 40 mm diameter 4: Thickness 5.5kW, 6000rpm, 40mm diameter 5: Bottom 4kW, 6000rpm, 40mm diameter Feed motor: 2.2 kW Feed speed infinitely variable 0-24 m/min Milling heads with adjustment gauge Total power requirement: 27 kW Dimensions set-up: 3400 x 1650 x 1970 mm Machine weight, approx.: 3500 kg
Angle system – window machine Weinig Unicontrol Type: UC 5P Year of Make: 1992 with PLC control Operation on the machine Incl. window tool make GOLD IV 78 with and without rain rail Good, ready-to-use condition. Demonstration – trial run possible.
Four-sided planer Weinig with glazing bead saw Type: P 23 Year of Make: 1995 Planing width 230 mm Planing height 130 mm 6 planing shafts + glazing bead saw Shaft arrangement 1 Bottom 4 kW 2 right-hand lifting spindle clocked with 3 Left 7.5 kW 4 Top-clocked shaft 5.5 kW 5 Bottom 5.5 kW Glass bead saw Spindle diameter 40 mm Right and left shafts are driven by 1 motor with manual Waxilit pump with distributor for extraction pipes fully equipped with planer heads as well as 4 additional milling heads good, ready-to-use condition
Key data: 500 mm
Circular saw Weinig Type 700S Machine No. 965/258 With saw blade diameter 500 mm Cutting height maximum 160 mm Including saw blade diameter 350 mm Saw blade spindle diameter 30 mm Motor power 3 kW 2 speeds Table tiltable 0-45° Angle stop on machine table Cutting width to the right of the saw blade with stop max. 700 mm Table size 1100 mm x 950 mm Extraction connection diameter 120 mm 2 pieces of new V-belts Cables and connectors new Dimensions 1100 mm x 1200 mm x H 1100 mm Weight with pallet 615 kg
Key data: 7 , 230 mm, 160 mm
Planer Weinig Type Powermat 2400 Very well preserved Weinig planer. Shafts U/RE/LI/O/U. U=22KW, RE=21 KW, LI=21 KW, O=30KW, U=22 KW, O=30 KW, U=22 KW Feed rate 8 – 100 rpm, 30 KW. Planing width: 20 mm – 230 mm, height 10 mm – 160 mm- Year of manufacture: 2016, with complete control and control panel. Noise hood. Errors, changes and prior sale reserved.
Key data: 6 , 20 mm, 8 mm
Weinig Profimat 26 Super Plastic equipment 1. Spindle lower horizontal spindle, 11KW, diameter 40mm, speed: 6,000rpm shaft without folding device, without planing shaft, can be retrofitted 2. Spindle right vertical spindle, common motor with left vertical spindle 11KW, diameter 40mm, speed: 6,800rpm, 3. Spindle left vertical spindle, common motor with right vertical spindle 11KW, diameter 40mm, speed: 6,800rpm, 4.Spindle upper horizontal spindle, 11KW, diameter 40mm, speed: 6,800rpm 5.Spindle lower horizontal spindle, 11KW, diameter 40mm, speed: 6,800rpm 6.Spindle universal spindle 360°, 11KW, diameter 40mm, speed: 6,800rpm Feed system: 5-24m/min, motor 4KW Dressing table 2.5m Service: Both axes of all spindles (except 1st spindle) are equipped with mechanical digital displays. ATS system, automatic 2-axis for spindle no. 3 and 4 More information o ...
SPECIFICATIONS: Length of the entrance area of the planer: 1000 mm Working width: 260 mm Working height:120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive with inverter (2.2 kW) RPM: 6000 Installed power: 44 kW Spindle configuration: Bottom (11 kW) Right - Left (11 kW) Top(11 kW) Bottom (11 kW)
Key data: 5 , 260 mm, 160 mm
Number of Spindles: 5 Spindle arrangement: u-r-l-o-u Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Working width adjustment: digital Working height adjustment: digital Feed speed: 20 m/min Table height constant: approx. 800 mm Bevel units: 1 Diameter of the suction nozzles: 140 mm Weight: 2500 kg Space requirement: 3650x1500x2000 mm Voltage/Frequency: 380V
Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998
WEINIG PROFIMAT four-sided planer max planing width 220mm max planing height 120mm 4 spindles, heads included spindles fully adjustable lower spindle – 4KW, right and left 7.5KW, top – 5.5KW feed rate 2.2KW on cardan shafts with smooth adjustment Electric up-down lift electric adjustment of the left vertical head branded machine preserved in very good condition
SPECIFICATIONS: Length of pre-planer machine inlet: 2200 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive Speed: 8000 rpm Voltage: 380 V Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) equipped with PowerLock HSK 3: Left (5.5 kW) equipped with PowerLock HSK and electronic control 4: Top (5.5 kW) with PowerLock HSK and electronic control 5: Bottom (5.5 kW) equipped with PowerLock HSK EQUIPMENT: Complete with milling
Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system: 1. Bottom 7.5kw 2.Rights 3.Left 11kw 4.Top 7.5kw 5.Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed adjustable via inverter Feed drive on gimbals Input table length 1970mm CE Certified
WEINIG PROFIMAT four-sided planer max planing width 220mm max planing height 120mm 5 heads, heads included Fully adjustable heads lower spindle – 4KW, right and left 5.5KW, up – 4KW and down – 5.5KW feed 3KW on cardan shafts with smooth adjustment Electric up-down lift electric adjustment of the left vertical head branded machine preserved in very good condition
Key data: 6 , 150 mm, 125 mm
Four-way planer Weinig Four-sided planer Type: PFA 14 N Built in 1972 Planing width 180 mm, Planing height 130 mm 6 planing shafts Entrance table length approx. 2000 mm Shaft arrangement 1 bottom approx. 4 kW 2 right approx. 3 kW 3 left approx. 4 kW 4 right approx. 5.5 kW 5 above approx. 7.5 kW 6 bottom approx. 4 kW Spindle diameter 40 mm Feed speed 6.5 - 49 m/min. Chain feed manual Waxilit pump with extraction distribution Planer heads included
Weinig Profiamt 22N four-sided planer Working width 230mmm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Rights 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed adjustable via variator 6-22m/min Feed motor 2.2kw Automatic worktop lubrication Worktop air cushion Length of the material insertion table 1970mm
SPECIFICATIONS: Machinable tool: max. Ø 300 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Different types of grinding wheels
WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included lower spindle – 4KW, right and left 7.5KW, top – 5.5KW feed on cardan shafts with smooth adjustment Electric up-down lift Electric planing width adjustment Branded machine preserved in good condition
WEINIG Return Mechanization RF 902 / 15RV WEINIG return conveyor system / workpiece return WEINIG similar to NEUMANN RF24 for the return of scantlings and strips to planing and moulding machines or individual wood sanding machines (one-man operation) Specifications: Workpiece dimensions length 300 – 3500 mm Workpiece dimensions width 30 – 230 mm Workpiece dimensions thickness min. 20 mm Conveyor path cross buffer approx. 1,100 mm Driven infeed and outfeed roller conveyor pneumatically timed Working height 800 – 960 mm Drives: Roller conveyor infeed: 0.18 kW, 30 m/min, constant Cross feed motor 0.37 kW, 40 m/min, constant Roller conveyor outlet: 0.18 kW, 60 m/min, constant Cross transport dimensions: Length 2,250 mm Width 1,570 mm WEINIG intermediate conveyor belt, type LTB 250-3500, S/N 81005, year 1997 Length 3500 mm Width 250 ...
Moulder 10 Tool Holders Composition: Lower horizontal shaft 5.5 kW Straight Vertical Shaft 5.5 kW Motorized Left Vertical Shaft 7.5 kW Motorized Straight Vertical Shaft 7.5 kW Motorized Upper Horizontal Shaft 7.5 kW Motorized Lower Horizontal Shaft 7.5 kW Motorized Upper Horizontal Shaft 7.5 kW Motorized Lower Horizontal Shaft 7.5 kW Motorized Left Vertical Shaft 7.5 kW Universal shaft 7.5 kW Capacity: 230 x 130 mm Entrance table 2000 mm Drive 6-36 m/min Roll in the table Short wood device Pneumatic pressure
Capacity: 230 x 120 mm Max tool Ø 200 mm 5 tool holders ATS control Composition: Bottom planer 5.5 kW, bore 40 mm 5.5 kW straight router, 40 mm bore Left Router 5.5 kW, 40 mm Bore Top planer 5.5 kW, bore 40 mm Bottom planer 5.5 kW, bore 40 mm Drive: 5-35 m/min Length of the entrance table: 2000 mm Roll in the table Pneumatic pressure Automatic table lubrication
Working width: up to 250 mm Working height: up to 120 mm Feed 6 to 36 m/min POWERLOCK system for quick tool changes POWERCOM (Motorized Pin Positioning) Memory System (optimization of start-up time after tool change) Grooved table Full-width device Composition: Shaft diameter: 40 mm Shaft rotation speed 8000 rpm Max diameter of vertical tools: 200 mm Max diameter of horizontal tools: 225 mm Grooved lower shaft Straight top 11 kW Left top 11 kW 7.5 kW straight router, Powerlock device Left Router 7.5 kW, Powerlock Upper shaft 18.5 kW Lower shaft 11 kW 15 kW upper shaft, Powerlock device 30 kW lower shaft, Powerlock device Optional tooling Ideal machine for parquet, carpentry and stairs Table for wooden insert for lower tool holder + vertical presser
Working width 230 mm Working height 160 mm 5 spindles U R L O U Motor 5.5 + 11+ 7.5+ 11 kw Feed rate 6-24 m/min Feed motor 4 kw
working width 230mm working height 130mm 5 heads + chamfering unit Head arrangement: lower/right/left/upper/lower head rotation 6000 rpm Memory system smooth adjustment of the feed speed up to 30m/min Feed on cardan shafts automatic toptop lubrication with adjustable droplet rate pneumatic pulling roller clamps
WEINIG Unimat 300, S/N 104754, YOC 2005 • Planing width max. 230 mm • Planing height max. 120 mm • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 5.5 KW • 3rd spindle left • 4th spindle top 5.5 KW • Feed rate 6 + 12 m/min. • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatically 'high-low controlled' • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Sliding roller in the run-out table • Digital displays • Manual lubricant pump with foot pedal • Central positions of the lubrication points • GRP safety hood • Inner light in the safety hood • 4x suction nozzle D=120 mm • Total connection approx. 19 KW Dimensions: Length: 3,320 (3,620 mm outle ...
Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder
working width 230mm working height 140mm 6 planing heads + two cutting heads head arrangement: lower/right/left/right/upper/lower/2x cutting grooved top pneumatic pulling roller clamps smooth feed speed control spindle diameter 40mm adjustment of heads in two axes
working width 230mm working height 140mm 5 heads Head arrangement: lower/right/left/upper/lower worktop lubrication system pneumatic pulling roller clamps adjustment of heads in two axes spindle speed 6000 rpm Electric pressure beam adjustment Feed on cardan shafts smooth feed speed control Heavy soundproofing cabin
working width 230mm working height 120mm 5 heads Head arrangement: lower/right/left/upper/lower spindle diameter 40mm adjustment of heads in two axes smooth feed speed control Feed on cardan shafts pneumatic pulling roller clamps
