Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm
Inv. Num. : 4854 Type: TS 161/21 Producer: Elumatec Created: 2004 Parameters: Maximum saw speed: 3200 1/min Saw blade diameter: 280 mm Electrical connection: 230/400 V. 3~. 50 Hz Power output: 1.05 kW Machine dimensions: 650x750x1300 mm Machine weight:: 130 kg Accessories: Roller conveyor Two saws A Lesson Slices
Key data: 180 mm, 300 mm, 60 mm
Two-spindle copy milling machine, Elumatec KF 78 / 60 Used & Functional For machining aluminium or steel profiles E.g. window construction With vertical and horizontal milling motor, spraying device and pneumatic clamping device Specifications: Profile height: 60 mm max Milling area horizontal: 180 x 70 mm Milling area vertical: 300 95 mm Stroke: 110 mm Bore speed: 6000 rpm Milling speed: 12000 rpm Air consumption per cycle: 12l Drive power: 740/800w Installation dimensions: (HxWxD) 160 x 280 x 110 Weight approx. 270kg
Year of construction: 2016 Double Miter Saw Manufacturer: ELUMATEC, Type: DG 244-E580/5 E580 Control with automatically swivelling workpiece support, roller conveyor and accessories
Automatic feed via control E 355 P For attachment to any Elumatec single-head saw (right) Max. feed length: 3000 mm With glazing bead caliper
Year: 2009 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control
Year: 2018 - technically efficient - cutting length: 6000mm - discs: 550 mm - E580 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cut according to the external dimension, without correction - cooling installation - vertical pneumatic clamps - automatically lowered and raised shield shields - sawdust extraction - label printer
elumatec SBZ 122/75 - 5-axis profile machining center High-performance centre for the machining of aluminium, plastic and thin-walled steel profiles with the profile bar at rest to protect the profile surface. - Infinitely variable A-axis from -120° to +120° - Infinitely variable C-axis positionable from -220° to +220° - All five axes can be moved simultaneously via RTCP (Rotation Tool Centerpoint) - Due to the additional C-axis, frontal processing from the left and right is possible - Tapping without compensating chuck - 6 horizontal pneumatic material clamping devices - Linear guides for clamp displacement, autonomous - Collision avoidance due to automatic tensioner detection and positioning - Automatic tool changer with twelve tool storage locations - incl. saw blade 180 mm - Year of construction: 2020 Specification - Max. machining length: 4000 mm - Travel X/ ...
corner joining press Elumatec EP 120 incl. support arms + tools Available from the end of November 2023 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12
Double mitre saw Elumatec DG 79 3000 mm with E 255 1 x stationary 1 x mobile Available from the end of November 2023 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12
Year: 2012 The machine has been in production since 2017. - technically efficient, ready to work - after full service - four-head welding machine VS 750 - EV 850 4-axis CNC cleaning machine - transport/cooling station - rotating station - online connection - automatic work cycle - profile height: 30-185 mm - welding dimensions: 350 x 350 mm, 2600 x 4000 mm - 0.2 mm and 2 mm flash reduction - seal formatters - Windows touchscreen operator panel - drilling head for the lower/upper hinge - disc cutter 250 mm - 1 axis of longitudinal travel with gripper
DG 244 by Elumatec 6m 580/5 . in mint condition. Under 500 hours of work. Original price € 110,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.
Powerful double mitre saw, ideal for mass cuts of plastic and aluminium profiles at 90° or 45°. Saw blade diameter 550 mm, 4,500 mm length, and 1-axis control E 590/1. Proven elumatec principle of sawing from below for optimum accessibility and the best possible use of the saw blade. - Minimized calculation effort thanks to external dimension cut. - Pneumatic angle positioning 90° or 45. - Protective shields with automatic lowering over the sawing areas. - Standard with suction nozzle at the top and bottom. - Steel machine bed in post-and-beam construction. PC control E 590/1: - Industrial PC 1-axis control E590/1 for the cutting length (X-axis) - Drive-independent absolute measuring system - Pneumatic locking in position - Robust, low-wear direct drive of the mobile sawing unit - Ergonomic arrangement of the control unit - Positioning accuracy +/-0.1 mm per m ...
Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm Positioning control E 255 with cycles Digital angle display on both units for swivel and tilt Ride-on roller conveyor Minimum quantity spraying device Weight: 2000 kg
Elumatec cutting and machining center model SZB 620 Capacity: 120 units/change SBZ 610 (cutting + machining module for machining in pvc profials) SBZ 610 to SBZ 609 (manual steel insertion) with label printer SBZ 609 (reinforcement screwing, pvc + steel machining) Receiving table. The scope of processing in pvc: holes for drainage, venting, the importance of places for the installation of perimeter catches, milling holes for the installation of ventilators. Screwing steel reinforcements. The scope of processing in pvc + steel: holes for mounting the handle in the window, for mounting the post, holes for dowels. Very good technical condition, the machine has been working since 2017.
offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs
Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be ...
Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is machine overhauled in our House and is then in a like-new condition. Among others were renewed following points: -New PLC control -Conversion to Elgo positioning system -New electric components -New pneumatic lines -New pneumatic components -Overhaul of the valve Terminal -Built-in Menzel minimal lubrication system -Replacing common wear parts -Overhaul of cabin -Overhaul ...
Connected load: 7.2kW, operating pressure: 7bar, saw blade diameter: 500mm, speed: 2800rpm, min. cutting length: 370mm, angular tilt: 45°-90°, machine weight: approx. 800kg. An on-site inspection is possible.
used
x-travel: 230 mm y-travel: 90 mm z-travel: 110 mm turning speeds: 12000 U/min total power requirement: 0,74 kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 600 x 550 x 1300 mm While stocks last 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis Elumatec SBZ 130 vertical machining centre was manufactured in 1999. It features a working range of X=6500mm, Y=400mm, Z=380mm, and a Ferrocontrol 3.204 control system. The revolver tool magazine holds 8 tools with a maximum speed of 6000rpm and a BT30 clamping cone. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 130 machine we have for sale. Contact us for more information.
This Elumatec AKS134/64 Circular Metal Saw was manufactured in 2018. It features a dual sawing unit with blades up to 650 mm and 500 mm, adjustable for precise angle cuts. The saw includes hydro-pneumatic feed, horizontal and vertical clamping, and manual angle settings with digital displays. Ideal for detailed metal cutting tasks. Contact us for more information about this machine.
This Elumatec DG104 sawing machine was manufactured in 2006. It features a double mitre saw with a 420mm diameter and an E 555/3 for 22.5º inside cuts. Additionally, it includes an extraction unit DG 104 cpl, a 3m roller conveyor, and profile lifting bars. A great opportunity to buy this Elumatec DG104 sawing machine. Contact us for more information.
Profile length: 500-7500mm, max. rotational speed: 22.000/min, the machine should be overhauled.
Capacity round maximum diameter: 125 mm Angle degrees maximum: 90 Feeding length automatic feeder: 0 mm Diameter sawing blade: 380 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Double circel blade Angle L / R Degrees L + R Cutting capacity 90 ˚ Ø 125 mm blade dimensions 380 mm roller conveyor / push up / measuring 3000 Cutting speed M/min 2800 / 3800 M/min DIMENSIONS Length 4100 mm Width 1400 mm Height 1800 mm
2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - / Contact us at -
