Model
(Manufacturer: MITSUBISHI)
Mitsubishi S16R- MPTA Marine engine rebuild in 2013
Additional options New/unused EPA marked Yes Engine Mitsubishi S16R2PTAW Generator power 2500 kVA Generator Mecc Alte ECO46-1.5 L CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,300 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel
Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTAA 2250 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel
Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA2 2100 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 20,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.
Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA 1915 kVA generator power Generator Mecc Alte ECO46-2S/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 18,950 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.
Additional options New/unused EPA marked Yes Engine Mitsubishi S12RPTAA2 Generator power 1650 kVA Generator Mecc Alte ECO46-1S/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 18,000 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well. For more information, please download the specification sheet.
Additional options New/unused EPA marked Yes Engine Mitsubishi S12R-PTA 1425 kVA generator power Generator Mecc Alte ECO43-2LN/ CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 13,170 kg Dimensions (Lxwxh) 750x230x250 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information
Coolant pump ET No.: 37545-80011 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
4 engines for sale model S16R-MPTA Building year 2008 power is 1170kw@1600 rpm after 40000 hours , engines have complete over all in 2013.
Mitsubishi Marine Diesel engine 1324kw @1500 rpm Building year 2008 rebuild
Chromed cylinders, console, double sheet control, semi auto plate change, alcohol damping, technotrans recirculation and refrigeration, perfecting 2 / 2 and 4/0, Grafix powder spray, IR dryer, auto blanket ink roller washers, automatic impression cylinder washers Mitsubishi D 3000 - 4R (4/0-2/2) from 2003 A 4 colors offset printing press of size 72 x 102 cm Option; IPC (ink remote CTRL.), Mitsu. Alcohol damp. With technological TRANS recirculation & refrigeration and ink temperature control (techno TRANS BETA C), all auto. Washers, S - APC, car. Setting size and double sheet control PPC, Grafix IR dryer PERFECTOR 4/0 - 2/2, prepared for CIP connection, prepared for NON stop delivery, Grafix powder spray condition; VERY GOOD condition, ONLY 84 million impressions immediately available, can be Lakes RUNNING in our Factory Pictures at http://www.imprimerie-unal.com/p-d3000r/r1.html
M. No.: 91080-41861 // Power: first 70 Sec. Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible.
Fuel: diesel, max. speed: 20km/h, max. load: 4000kg, machine dimensions X/Y/Z: approx. 3150mm/1500mm/2300mm, weight: approx. 6200kg, operating hours: approx. 13533h. The handbrake of the must be adjusted. Documentation available. An on-site inspection is possible.
: : TYBFE85DC6DU19741 length: 5100-5100 mm width: 2100-2300 mm height: 2480-2480 mm : : 330.000 km The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible.
Size: 720 x 1020 mm Impression: 300 Mio. Equipments: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator
This 5-axis Mitsubishi FX 20 wire edm machine was manufactured in 1999. It offers precision and efficiency for complex wire EDM tasks. Consider the opportunity to buy this Mitsubishi FX 20 wire edm machine. Contact us for more information.
This 5-axis Mitsubishi FA 20 SM wire EDM machine was manufactured in 2006. It features a travel path of 500 x 350 x 300 mm, a conic angle capacity for a 260 mm workpiece height, and can handle workpieces up to 1500 kg. It supports wire diameters from 0.1 to 0.36 mm and includes automatic water beam threading and a wire chopper. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi FA 20 SM machine we have for sale. Contact us for more information.
This Mitsubishi EA12VM ADVANCE die-sinking EDM machine was manufactured in 2018. It offers precision and reliability for your machining needs. Consider the opportunity to buy this Mitsubishi EA12VM ADVANCE die-sinking EDM machine. Contact us for more information.
The Mitsubishi FA30VM is a wire-cut Electrical Discharge Machine (EDM) designed for precision machining of complex components. While there isn´t specific information available for a model designated as TFA30VM, it´s possible that this refers to the FA30VM model. The FA30VM is engineered to handle large workpieces and offers advanced features for high-precision manufacturing tasks. Key Specifications of the Mitsubishi FA30VM: Table Size: 1100 x 875 mm Exapro X-Axis Travel: 750 mm Exapro Y-Axis Travel: 500 mm Z-Axis Travel: 350 mm Exapro Maximum Workpiece Dimensions: 1300 x 1000 x 345 mm Exapro Wire Electrode Diameter: 0.2 - 0.36 mm Find more here - / Contact us at -
