in very good working condition
The scope of delivery includes: 01x Dumpster, second choice Manufacturer: Weber Total width: approx. 1,360 mm Total depth: approx. 770 mm Total height: approx. 1,310 mm Content: 360 kg Volume: 770 liters Further data / information: Material color bin: black Material color lid: yellow Usable width: approx. 1,085 mm Useful depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. An additional desired transport or shipment of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery from us.
WEBER COOLING BASE TWO Vacuum cooling system Cooling capacity: 2 IP or 2 EUR Products to be cooled: leafy vegetables/fruits up to 1000 kg Cooling temperature: from 20-30 degrees C to 3-5 degrees C Control: PLC Unitronics V1040, Weber 2022 software Vacuum pump: 1 x Busch RA R5 0305D ( 300 m3 / h ) Chiller: Aermec ANL 202 Compressor: Metabo Basic 250-24W OF
Item condition: maintained Availability: as of now Machine dimensions (LxWxH): approx. 2050 x 1900 x 1250 mm Machine No.: 6377
Item condition: maintained Availability: immediately Location: Thuringia
Ice-generator Ice production: approx. 700 kg in 24h Power supply: 400 V, 50 Hz, 3 phase, 16 A Control voltage: 24 V Power consumption: 2,1 kW Refrigerant: R 404 A Dimensions: Width 1000 mm Depth 800 mm Height 1100 mm
We sell here a belt scraper from the manufacturer Weber, type ASB 600/2 in a very good used and functional condition. The machine runs on 400 volts, 0.7/0.85 kW, complete stainless steel, bandwidth 30 cm, rollable, workshop tested, ready for immediate use, dimensions B/D/H 80/110/120 cm, more on request.
Hydraulic bottles Jack stamping trolley lifter for trucks and commercial vehicles. Manufacturer Weber Hydraulics Lifting capacity 20to Building height 240mm Lifting distance 155 mm Threaded length 110 mm Total length extended and thread turned out 505 mm Diameter piston rod 60 mm Unused lifter from Bundeswehr bestaenden, without oil filling and without pump ingestion rod. 12 stueck available, price per piece. Special price
Weber ASB 400 skinner, cutting width 400mm, can be used (open) as combination machine with carriage table or (closed) with pressing unit and conveyor. You are very welcome to inspect the machine in 56070 Koblenz, Germany.
Weber 5200 label applicator attached with a Zebra 170PAX4 printer: - Year of production: 2005 - Serial number: W5200v21795 The Weber model 5200 Series systems offer a choice of three application methods: air blow, flex-tamp, or tamp-blow. All methods provide precise label placement of ±0.06. The new systems feature several options designed to maximize versatility: - A quick-change tamp pad - Height sensor - Multiple I/Os - Adjustable stand Label height: 190mm Condition: good Dimensions: 1.250mm x 1.000mm & 1.800mm (LxW&H)
This WEBER LCE-2000-S-S1350 was manufactured in 2001. It features a wide-belt sanding machine with a working width of 1350 mm, a sanding unit plus a cleaning brush, and sanding shoes with pressure beam segment control. The cutting speed of the sanding belt is infinitely variable, and it has a 15 kW frequency-controlled drive. Maximum feed speed is 14 m/min. Contact us for more information about this machine.
A Weber label dispenser for pre-printed self-adhesive labels is available. Inner core diameter: 73mm, max. label roll diameter: 300mm, min. label dimensions X/Y: 10mm/20mm, max. label dimensions X/Y: 120mm/300mm, labeling capacity: 600 labels/min, wipe-on speed: 50m/min, tamp-on speed: 120 labels/min, accuracy: +/-0.8mm, machine dimensions X/Y/Z: approx. 720mm/310mm/590mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.
Cutting width: 350mm, dimensions X/Y/Z: approx. 1900mm/800mm/1250mm, weight: approx. 300kg. On-site inspection is possible.
pressure: 20 t distance between columns: 220 mm stroke: 50 mm total power requirement: 0 kW weight of the machine ca.: 0,17 t dimensions of the machine ca.: 0,4 x 0,5 x 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight: 2,2 t extruder diameter: mm : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting depth: 220 mm weight of the machine ca.: 375 kg 4 new blades: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 900mm, max. workpiece height: 100mm, sanding units: 1, sanding belt dimensions X/Y: 2620mm/1150mm, feed speed: 2m/min-14m/min, compressed air requirement: 1800m³/h, operating pressure: 5bar-7bar, weight: approx. 1800kg. The feed belt is no longer grippy. Documentation available. On-site inspection is possible.
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.
Height=1.51 m, Overall length= 0.57 m, Overall width= 0.67 m, Net weight= 91 kg,
Height=1.6 m, Overall length= 0.9 m, Overall width= 0.99 m, Net weight= 936 kg,
Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor WEBERVibratory Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceType: ZEM 360Masch.- No.: 1113557 Year of Construction: 2004Pot Diameter Top: 360 mmPot Diameter Bottom: 250 mmPot Inner Height: approx. 110 mmSorting Lane Width: approx. 20 mmFilling Weight: approx. 12 kgFilling Quantity: approx. 3 LitresControl Voltage: 24 Volts DC (external power supply is required)Mains connection: 230 Volts, 50 Hz. Operating pressure: 6 bar control unit
Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor WEBERVibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceType ZEB 242Masch.- No.: 1115130-2 Year of Construction: 2005Pot Diameter Top: 200 mmPot Diameter Bottom: 150 mmPot Inner Height: approx. 70 mmSorting Lane Width: approx. 10 mmFilling Weight: approx. 2 kgFilling Quantity: approx. 0.7 LitresControl Voltage: 24 Volts DC (external power supply is required)Mains connection: 230 Volts, 50 Hz. Operating pressure: 6 bar control unit
Vibratory Spiral Conveyor / Sorter / Spiral Conveyor / Vibratory Conveyor WEBERVibratory Bowl, Sorter / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceType ZEB 242Masch.- No.: Z115130-1 Year of Construction: 2005Pot Diameter Top: 200 mmPot Diameter Bottom: 150 mmPot Inner Height: approx. 70 mmSorting Track Width: approx., 10 mmControl Voltage: 24 Volts (DC)Power Supply: 230 Volts, 50 Hz.Operating Pressure: 6 bar Control Unit WEBER Type SOR 3 with Adjustable Vibration speed - for start/stop
Spreader and crimping unit with hydraulic unit WEBER type E45 / 59600.0Hydraulic spreader, hydraulic spreaderYear of construction 1988 / 1986Hydraulic power unit type E45 / 59600.0Operating pressure max. 630 barFlow rate approx. 2 l/minTank capacity approx. 10 litresSpreader - pliers WEBER type SP30 / 059 198.0Projection = arm length 340 mmSpreading travel max. 810 mmExpansion force in the working area max. 132 kNSspeed force 99 kN- Double hose with plug connectionNominal power 0.9 kWNetz connection 220 Volt, 50 HzWeight
550 mm working width, with 5.4 kw Hatz engine, 300 kg operating weight
Manufacturer: Weber, Type: OFZ 1 - 1350, Year: 1993, Monting of the machine: Walze, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 1, Sanding belt dimensions: 2.620 x 1.350, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : no, Table hight adjustment by engine: yes, Rubber roller: 1, Band 1 Leistung kW : ca 18, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: ca 5 - 15, Transportbandantrieb kW: ca 3, Intermediate sanding of lacquer: no, Year :1993
Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005
