We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passage. OVERVIEW OF THE UNIT CONFIGURATION: Electronic control POWER CONTROL PC 20+ PU top pressure rollers instead of rubber rollers Optimization of workpiece spacing Inlet ruler extension by 300mm with additional laminate overhang device JOINING MILLING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A12 with automatic edge retraction – Quickmelt APPLICATION UNIT – Standard application unit replaceable PU glue – Pressure zone with motorized adjustment QA 45 EVA application unit for all types of adhesives and quick changeovers CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0.35 KW PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT CAPS PRE-MILLING UNIT 2 X 0.55 KW counter-rotation – with PNEU ...
Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passage. OVERVIEW OF THE UNIT CONFIGURATION: JOINING MILLING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A8 with workpiece preheating, fill level control, Quickmelt application unit, magazine and motorized pressure zone CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT MULTI-STAGE MILLING UNIT MS 40 COUNTER ROTATION PNEUMATIC 2-POINT ADJUSTMENT SHAPE MILLING UNIT 1 X 0.35 KW WD 60; also for construction floors PNEUM. 2-POINT ADJUSTMENT RADIUS/CHAMFER MZ 40 MULTI-STAGE SCRAPER UNIT GLUE JOINT SCRAPER BLADE BUFFING UNIT Top pressure: PU rollers instead of standard rollers Release agent spray unit workpiece, leading and trailing edges; edge material Power Control PC 20+ Ele ...
Edge banding machine Brandt Highflex KDF 220 with jointing, corner copying and two Scraper blades. Very well automated. A video of the running machine can be sent on request. Edge thickness roll approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height approx. 10 - 60mm Feed speed approx. 10m/min Noise protection hood Pull-out workpiece support Suction connection 1x120mm, 1x100mm, 3x80mm Easy-touch EC+ control for easy operation of the machine 4 programs can be saved. Machine in high-flex design, highly automated, change of edge from thin edge to thick edge via programs Aggregates: Extended inlet zone Chain conveyor central lubrication, pneumatic manual Quick-change glue basin device, currently one glue basin available Top pressure manual adjustment, PU rollers Infeed ruler manual adjustment with SIKO counter on chip removal Joint milling with slide ...
For sale is a Brandt edge banding machine bj. 2010 The machine was serviced by the Brandt company only 3 months ago. No defective available. For sale due to new acquisition. Special equipment in the pictures. Loading facilities available Price is net VAT
Equipment: - Extended inlet ruler - Joining milling unit 2 x 2.2 KW 200 Hz - Gluing unit A8 - Cross-cut unit chamfer/straight 2 x 0.18 KW - Pneumatic adjustment caps chamfer/straight - Milling unit 2 x 0.55 KW counter-rotation with multiple roller probing - Pneumatic 2-point adjustment - Program adjustment side buttons - Shape milling unit 1 x 0.35 KW WD 40 - Pneum. 2-point adjustment radius/chamfer - Profile scraper with quick-change heads and special keypad - Pneumatic adjustment of the scraper blade - Glue joint scraper blade - Buffing unit Technical data: - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm - At workpiece thickness 41-60mm ¦ 150 mm Depending on the workpiece length - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 8 - 60 mm - Edge height max.= workpiece height¦ + 6 mm - Edge m ...
Edge banding machine Brandt type KDF 890 Technical data: - Description: see machine photos
Edge banding machine Brandt type KDF 670 Technical data: - Inlet ruler: manually adjustable - Joining milling unit with 2 motors each 2.2 kW: both motors pneumatically controlled - Hot melt glue manga - Pressure zone: with 1 main pressure roller and 3 post-press rollers - Cross-cut unit with 2 motors each 0.35 kW: automatically adjustable via program from chamfer caps to straight caps - Edge milling unit with 2 motors each 0.55 kW: for flush milling, chamfer milling or radius milling with 4-way fixed point adjustment for side scanning - Groove milling unit: with horizontal shaft - Copy milling unit with 2 motors each 035 kW: with pneumatic control in and out - Profile scraper unit: with pneumatic input and output control - Flat-pulling blade unit - Buffing unit
! the regression shown in the photos is not included Equipment: - Electronics control power control PC 20+ - PU top pressure rollers - Motorized height adjustment upper pressure - Hood interior lighting - Infeed ruler adjustable and extended by program - Program adjustment pressure zone - Quickmelt application unit - Autom. Edge retraction - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, with pneum. 2-point adjustment - Pre-milling unit 2 x 0.55 kW - Milling unit 2 x 0.55 kW, with program Adjustment to edge thickness and multi-roller scanning - Shape milling unit top+bottom, 2 x 0.35 kW - Scraper blade with quick-change heads with additional device for pointed workpieces - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit 2 x 0.18 kW - Interface electr./mech. for Ligmatech ZHR01 ...
Used machine Without pre-milling Edge Caps Front/Rear Milling Rounding Top/Bottom Milling Rounds Front/Rear Scraper Blade: Top/Bottom Polishing Top/Bottom
Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280
I am selling a fully equipped edge banding machine BRANDT Optimat KDF 220 C, built in 2014: Configuration: Input stop manually adjustable Manually adjustable joint milling Edge banding EVA glue / PUR glue possible Material pressure zone manually adjustable Cross-cut saws pneumatically adjustable Radius milling at the top + bottom manually adjustable Round unit 1-motor manually adjustable Radius scraper R2 can be adjusted pneumatically (set R1 included) Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Length including feed plate 4150mm Weight 1320kg Very good condition, fully functional ! Including full documentation and CE. Available the same.
Equipment: - Quick-change gluing part for hot-melt adhesive -Auto. Edge magazine with roller plate - Pressure zone with pneum. pressurized pressure roller and 2 free-running holding pressure rollers - Power Control PC 20+ control - Adjustable inlet ruler - Joining milling unit 2 x 2.2 kW - pneum. Adjustment caps, scraper, program adjustment side strop rollers and pneum. 2-point adjustment vertical sensing rollers - Cross-cut unit 2 x 0.18 kW - Milling unit 2 x 0.55 kW - Shape milling unit 1 x 0.35 kW - Scraper unit for PVC edging - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit Specifications Edge thickness 0.4 - 8 mm Roll separating max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 - 60 mm Feed max. approx. 11 m/min. Electrical 400 V - 3 Ph. - 50 Hz Connected load approx. 10.5 kW Pneumatic connection 6 bar Overall length 4, ...
I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...
Shape milling machine Brandt type FP 10 Specifications: • Year of construction: 1989 • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 - depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm. • Electrical: 220 V - 1 Ph. - 50 Hz • Power supply (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Swabing unit: for processing thick PVC edges • Weight (kg): approx. 120
Postforming machine in cycle Brandt type PF 20/31 Specifications: • Working length max. (mm): 3100 • Profile height max. (mm): 200
Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg
Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0,5 - 1 mm Feed speed: ca. 4 m/min Only coil edges
Min/Max. workpiece length 1800 / 4200 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW
Max. wworkpiece length 4500 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW
Min/Max. workpiece length 1800 / 4200 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW
Static contour trimming machine for rounding off edges to softformed or postformed panels. The machine has a tracing roller and a trimming motor and carries out both symmetric and asymmetric copying work (by means of plc controlls). For the finishing a polishing brush has been built up additionally. Max. workpiece thickness: 55 mm. Max. workpiece width: 80 mm. Max. profile depth 80 mm. Max. edges thickness: 3 mm. Motor: 0,5 kW.
Working piece thickness (Radius) ca. 16 - 55 mm Working piece thickness (Chamfer) ca. 12 -55 mm Working piece width min. Ca. 30 mm Inner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours) Edge thickness max. ca. 3 mm Milling motor 2 x 0,4 kW, 10950 o/min. Dust extraction 1 x diam. 80 mm Working height 900 mm Radius 3 mm tooling
Edge banding machine Type: KDF 440 Manufacturer: Brandt Year: 2010 In good condition, under power Find more here - / Contact us at -
This BRANDT KDF 680 edgebander was manufactured in 2008. It is a robust and reliable machine, ideal for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 680 edgebander. Contact us for more information.
This BRANDT Ambition 1660 FGC edgebander was manufactured in 2010. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this BRANDT Ambition 1660 FGC edgebander. Contact us for more information.
This BRANDT Highflex 1440 edgebander was manufactured in 2010. Ideal for precise edgebanding applications, it ensures consistent performance for a variety of woodworking tasks. Consider the opportunity to buy this BRANDT Highflex 1440 edgebander. Contact us for more information.
This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information.
This BRANDT KDF 991 edgebander was manufactured in 2008. It is designed for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 991 edgebander. Contact us for more information.