800kW CAPSTONE C800S Containerised set with MATTEI Compressor. Make and model: Capstone C800S Capacity: 4 x 200kW Year: 2019 Fuel: Landfill Gas Hours and status: Bay A: 2,527h - Powerhead broke in June 2023. (This is a backup bay with no head recovery). Bay B: 25,113h - Ready to operate - New Powerhead installed in April 2022 at 12,142h. Bay C: 16,590h - Powerhead ok, replaced in December 2022 at 10,294h - Stopped because of an electrical problem on the control board March 2023. Bay D: 19,093h - Powerhead broke down in March 2024. General information: Stopped in March 2024, stored since. Ready to be shipped. MATTEI Compressor in 10 foot container Make and model: MATTEI G135K7-50-25 Fuel: Landfill Gas Hours: 18 329h (back up with another compressor). Please check our full range of equipment at gasengineexchange.com.
Available in stock 1 x Used Capstone Digital Power Controller (DPC Board). The unit is complete. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 2 x NEVER USED Capstone Control Stations. Most commonly used for Microturbines C30 Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone Brake Resistor. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone Brake Resistor for DPC Board. Most commonly used for Microturbines C30. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone RFC Controller. Complete with electrical board. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone FB RFC Heat Exchanger. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone BCT Inductor Module. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 1 x Used Capstone BCT Inductor Module. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone Diesel Fuel Manifold. Most commonly used for Microturbines C30. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone LCM Capacitors Module. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone Pre-charge LCM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone UCBE ASSY. Complete with User Connection Board (P/N 508598-030). The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 2 x Used Capstone Pre-heating Modules. Hawke International PL612 Bartec HCL 600-T3-10-3 The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone Diesel Fuel Injectors. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 6 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas
Available in stock 4 x Used Capstone Gas Fuel Manifolds. Most commonly used for Microturbines C30. All of the manifolds are complete with premix solenoid (P/N 507033-001). The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x NEVER USED Capstone Igniter (P/N 516853-001). The equipment was NEVER USED and it is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone ECM Capacitors Module. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Capacitance: 2200, 2200 uF Voltage: 450 VDC Tolerance: +/- 20% Type: Ceramic Capacitor Operating temperature: -40 TO +85 ºC
Available in stock 1 x Used Capstone IGBT ECM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 2 x Used Inductors Modules. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone IGBT LCM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Available in stock 1 x Used Capstone LCM Board. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
