date: 08.10.2026
approved
dealer
item-No.: 162753543
used
approved
Location: de
Price: used machinery auction RESALE 2.000 €

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device, machine light, angle milling head and counter holder

date: 08.10.2026
approved
dealer
item-No.: 162753538
used
approved
Location: de
Price: used machinery auction RESALE 2.497 €

with 2-axis digital display, Fabr. HEIDENHAIN, with angle milling head, 2 dividing heads, additional clamping table, counter holder, 3-jaw chuck, various interchangeable wheels, machine light and steel transport trolley

date: 08.10.2026
approved
dealer
item-No.: 162753529
used
approved
Location: de
Price: used machinery auction RESALE 2.000 €

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device and machine light

date: 04.08.2026
item-No.: 162750026
New in: 1983 used
Location: de

Key data: 400 mm, 150 mm, 340 mm

Lid FP 1, Year of construction approx. 1983 / Overhauled by Arnold approx. 2012 3 axis digital display, Travel X/Y/Z 400/150/340 mm, Table size 600 x 210 mm, T-slots: 4 T - groove width: 12 mm Spindle speeds:: 20 - 2000 rpm Speed levels working spindle: 12 Feed stages: 10 Spindle holder: MK 4 Quill stroke vertical: 60 mm Machine weight approx.: 0.8 t

date: 20.05.2026
approved
dealer
item-No.: 162744532
used
approved
Location: de

Clamping surface of the fixed angle table: 195 x 605 mm Table movement longitudinal/vertical automatic and by hand: 290/300 / 330/340 mm Headstock transverse movement by hand: 150 mm Spindle holder: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm

date: 28.09.2026
approved
dealer
item-No.: 162739438
used
approved
Location: de

Univ. Tool Milling Machine DECKEL Type FP 1 Masch. No. 37101 Year of construction approx. 1969 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal: 60-1200 rpm. 12 steps Motor power 1.0 and 1.5 kW pole-switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant device with mechanical pump in the machine foot - Quill shift on the vertical milling head 60 mm - Adjacent control cabinet Space requirements L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition Accessories: -Collets -Roundtable -Vice - Counter holder H. milling

date: 24.05.2025
item-No.: 162711366
New in: 1967 used
Price: 7.800 €

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

date: 24.05.2025
item-No.: 162711120
New in: 1979 used
Price: 13.500 €

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 2101 - 0778 Year of construction 1979Routes manual X: 300 mm Y: 160 mm Z: 330 mmTable size 600 x 210 mmSpindle holder SK 40 - S20x2Spindle speed 40-2000 rpm. 16 stepsFeed X and Y-axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-switchableMains connection 380 volts, 50 Hz- Stepless feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm-

date: 24.05.2025
item-No.: 162711128
New in: 1979 used
Price: 14.500 €

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 2101 - 0875 Year of construction 1979Routes manual X: 300 mm Y: 160 mm Z: 330 mmTable size 600 x 210 mmSpindle holder SK 40 - S20x2Spindle speed 40-2000 rpm. 16 stepsFeed X and Y- axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- infinitely variable feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm-

date: 24.05.2025
item-No.: 162711489
New in: 1968 used
Price: 9.500 €

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

date: 24.05.2025
item-No.: 162711237
New in: 1960 used
Price: 4.600 €

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

date: 24.05.2025
item-No.: 162711264
New in: 1965 used
Price: 6.800 €

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 34338 Year of construction approx. 1965Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 200 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stagesMotor power 1.0 and 1.5 kW pole-switchableMains connection 380 volts, 50 Hz- 3-axis digital display HEIDENHAIN, type VRZ 753 B- Spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with

date: 24.05.2025
item-No.: 162711527
New in: 1960 used
Price: 6.500 €

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNet connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot- adjacent

item-No.: 162719980
used

x-travel: 300 mm y-travel: 340 mm z-travel: 250 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

date: 31.10.2024
item-No.: 162730020
used
Location: de
Price: VB 9.500 €

Refurbished lid FP 1 for sale. - 3-axis digital display - Cooling/lubrication pump in the machine base - Overhauled 2024 - Incl. tool table and machine vice If you have any questions, please: 01728101136

date: 26.08.2024
item-No.: 162696858
used

x-travel: 300 mm y-travel: 200 mm z-travel: 340 mm Spindle Speed: 40-2000 U/min. weight of the machine ca.: 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

date: 26.08.2024
item-No.: 162699582
New in: 1968 used
Price: 9.500 €

Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 52185/08 Year of construction 1968 Travel distances X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 stages Motor power 1.0 and 1.4 kW pole-switchable Mains connection 380 volts, 50 Hz - Feed in the X and Z axis - Two motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Fixed angle table coolant device in the machine foot - adjacent control cabinet counter holder with counter bearing for horizontal milling SK 40 Space requirement L x W x H 1200 x 1100 x 1600 mm Weight approx. 1000 kg Very good condition; used

date: 26.08.2024
item-No.: 162699336
New in: 1979 used
Price: 13.500 €

Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 2101 - 0778 Year of construction 1979 Travel paths manual X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps feed X and Y-axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-switchable mains connection 380 volts, 50 Hz - infinitely variable feed in the X and Z axis - Spindle speed over 2 motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Vertical milling head swivel and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray for placing on the machine foot - Electrical plan available , space requirement L x W x H 1350 x 1100 x 1700 mm , weight 770 kg , good condition; used

date: 26.08.2024
item-No.: 162699344
New in: 1979 used
Price: 14.500 €

Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 2101 - 0875 Year of construction 1979 Travel paths manual X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps feed X and Y-axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchable mains connection 380 volts, 50 Hz - infinitely variable feed in the X and Z axis - Spindle speed over 2 motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Vertical milling head swivel and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray to be placed on the machine foot - Electrical diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 770 kg Very good condition; used

date: 26.08.2024
item-No.: 162699613
New in: 1960 used
Price: 6.500 €

Univ. tool milling machine DECKEL type FP 1 Masch. No. 33064 Year of construction approx. 1960 Travel distances X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.1 and 1.4 kW Mains connection 380 volts, 50 Hz - Feed in the X and Y axes - Pinole shift on the vertical milling head - Fixed angle table - Coolant device with mechanical pump in the machine base - adjacent control cabinet with cable plug connection Space requirement L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg Good condition Machine newly painted in the original shade of grey; used

date: 26.08.2024
item-No.: 162699416
New in: 1960 used
Price: 4.600 €

Univ. tool milling machine DECKEL type FP 1 Masch. No. 28317 Year of construction approx. 1960 Travel distances X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Spindle holder horizontal MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 0.8 and 1.1 kW Pole switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axis - Coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm - Vertical milling head +/- 90 swivelling - Metal substructure made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg Good condition; used

date: 26.08.2024
item-No.: 162699432
New in: 1965 used
Price: 6.800 €

Univ. tool milling machine DECKEL type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel distances X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.0 and 1.5 kW Pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axis - Coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm - swivel, rotary and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used

date: 26.08.2024
item-No.: 162699502
New in: 1967 used
Price: 7.800 €

Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 51265/08 Year of construction approx. 1967 Travel distances X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 stages Motor power 1.0 and 1.6 kW pole-switchable Mains connection 380 volts, 50 Hz feed rate in the X and Z axis - Spindle speed over 2 motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm Weight 650 kg Good condition; used

date: 22.04.2024
item-No.: 162684316
New in: 1979 used
Price: 14.500 €

Univ. tool milling machine DECKEL type FP 1 Masch. No. 2101 - 0875 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchable Mains connection 380 volts, 50 Hz - Infinitely variable feed in the X- and Z-axis - Spindle speed over 2 motor speeds and 8 gear stages - Quoil displacement on the vertical milling head 60 mm - Vertical milling head swivels and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray for placing on the machine base - Electrical plan available Space requirements L x W x H 1350 x 1100 x 1700 mm Weight 770 kg very good condition; used

date: 17.10.2023
item-No.: 162639176
New in: 1987 used
Location: de

Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION !!

item-No.: 160846302
New in: 2102 used
Location: de

x-travel: 300 mm y-travel: 340 mm z-travel: 250 mm Control: total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Heidenh. 3 axes aktiv digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

date: 25.10.2023
item-No.: 160763167
New in: 1960 used
Location: de
Price: 4.600 €

Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 28317 Year of construction approx. 1960 Travel X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Spindle holder horizontal MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps spindle speed horizontal 60-1200 rpm. 12 steps Motor power 0.8 and 1.1 kW pole switchable Mains connection 380 volts, 50 Hz - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm- Vertical milling head +/- 90 pivotable - Metal substructure made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg good condition; used

date: 25.10.2023
item-No.: 160453901
New in: 1965 used
Location: de
Price: 6.800 €

Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm. 12 stages Motor power 1.0 and 1.5 kW pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinole shift on the vertical milling head 60 mm- swivel, rotate and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used

date: 25.10.2023
item-No.: 160453731
New in: 1967 used
Location: de
Price: 7.800 €

Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 51265/08 Year of construction approx. 1967 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 steps Motor power 1.0 and 1.6 kW pole switchable Mains connection 380 volts, 50 Hz feed in the X and Z axes - Spindle speed over 2 motor speeds and 8 gear stages - Pinole shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm Weight 650 kg good condition; used

date: 25.10.2023
item-No.: 160453504
New in: 1960 used
Location: de
Price: 6.500 €

Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 33064 Year of construction approx. 1960 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 stages Motor power 1.1 and 1.4 kW Mains connection 380 volts, 50 Hz feed in the X and Y axes - Pinol shift on the vertical milling head - fixed angle table - Coolant device with mechanical pump in the machine foot - adjacent control cabinet with cable plug connection Space requirement L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg good condition Machine new Painted in original grey tone; used

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
DECKEL 3rd category level