Capacity: 5 Kg internal dimension: 100 x 75 x 450 mm output: 0,4 kw connected load frequency: 220 - 240 V setting device: 30 - 180 Grad weight: 10 kg dimensions: 570 x 200 x 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping range of chuck: 120 - 380 mm height: 95 mm daylight: 170 mm external diameter: Futter 400 mm external diameter: Spannhebel 600 mm weight: 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1000 - 1450 mm max. torque on the faceplate: 2000 Nm engine output: 0,75 / 0,55 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 560 mm table load: 0,3 t swivelling range: 0 - 90 Grad turning speeds: 0,25 - 4,0 U/min : 360 Nm welding current: 500 Ampere total power requirement: 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 480 x 180 mm feed: 100 - 1000 mm/min total power requirement: 2 x 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1500 mm table load: 5000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1300 - 2050 mm max. torque on the faceplate: 10000 Nm engine output: 1,5 / 1,5 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1400 mm table load: 2,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 100 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 240 mm feed: 100 - 1000 mm/min total power requirement: 2 x 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 t workpiece diameter: 250 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1600 mm table load: 6 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 12000 Nm 0: 1,5 / 2,2 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 700 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min : 900 Nm total power requirement: 0,37 / 0,37 kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 150 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 300 mm feed: 100 - 1000 mm/min total power requirement: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1500 mm table load: 5 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 10000 Nm 0: 1,5 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping range of chuck: 80 - 280 mm height: 67,5 mm daylight: 100 mm external diameter: Futter 300 mm external diameter: Spannhebel 480 mm weight: 13 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 900 mm table load: 1,0 t swivelling range: 135 Grad turning speeds: 0,12 - 1,2 U/min : 820 mm welding current: 500 Ampere total power requirement: 0,75 + 0,55 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping range of chuck: 200 - 500 mm height: 110 mm daylight: 240 mm external diameter: Futter 320 mm external diameter: Spannhebel 700 mm weight: 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 80 t workpiece diameter: 850 - 5500 mm drum diameter: 450 x 240 mm feed: 100 - 1000 mm/min total power requirement: 2 x 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
