used Band Saw Automatics for sale

cutting diameter: / mmsaw band length: 8800 mmcutting width: / mmtotal power requirement: / kWweight of the machine ca.: / trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: / mmsaw band length: 8800 mmcutting width: / mmtotal power requirement: / kWweight of the machine ca.: / trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: / mmsaw band length: 8800 mmcutting width: / mmtotal power requirement: / kWweight of the machine ca.: / trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Amada HA-250 ll Horizontal Band Saw Saw blade size 3505 x 34 x 1.1 mm Cutting speed 24 - 90 m/min Cutting performance : - round (0°) 30 - 250 mm - square (0°) 250 x 250 mm - Rectangle (0°) 300 x 250 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

cutting diameter: 270 mmsaw band length: 2880 x 27 mmcutting width: 0.9 mmweight of the machine ca.: 0.4 tdimensions of the machine ca.: 1.6 x 0.7 x 1.5 mSaw blades: 5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmcapacity 90 degrees: flat: mmband speed: 40 / 80 m/minsawing motor: 1,3 kWlength of draw-in: 600 mmsaw band length: mmtable height: mmweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,4 x 1,6 x 1,8 mAutomatic band saw- Feed length max. 500mm- with multiple stroke- chip conveyor- including some saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a Behringer automatic sawing machine max saw diameter 310mm Max material dimension 500300mm Piece length automatic operation from 100mm Residual piece length manual from 10mm Cutting speed 20-140 1/min Quantity of cooling lubricant 60 System / Belt Tension Pressure 60bar Motor power sawing operation 4 KW Motor power hydraulic pump 1.5 KW Motor power cooling lubrication pump 0.12 KW Motor power chip conveyor 0.09 KW Operating voltage 400V 50Hz Control voltage 24V DC Fuse 25A Cable cross-section min 54mm² Dimensions approx. 300015001900mm High Weight 2300kg Accessories: Conveyor Roller conveyor documentation and about 25 pieces of new saw blades

Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via controller: 25 - 235 m/min Conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours For more technical data, see photo or on request Machine weight: approx. 3 t

cutting diameter: 360 mmsaw band length: 4100 mmcutting width: 32 mmturning speeds: 130 U/mintotal power requirement: 5 kWweight of the machine ca.: ca. 3 trequired space: 2,45 × 3,00 × 1,89 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 270 mmsaw band length: 5800 mmcutting width: 41 mmcutting speed: 20-140 m/minControl: weight of the machine ca.: 3 tdimensions of the machine ca.: 800 x 350 x 250 cm x cm x cmSaw blades: Div. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: d = 325 mmband length: 500 x 50 x 2,5 mmstroke: 48 / 75 / 118 h/mintotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: LBH 1,8 x 0,7 x 1,0 mSawing range up to: Ø 325 mm or 280 x 280 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic feed Saw size 3010x27x0.9m Normal Coolant System Micros spray coolant system Scooter 5 meters

Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Stock number: 3873 AUTOMATIC BAND SAW Manufacturer: BOMAR, Type: 510.330 GA Year of Make: 2003 Specifications: Size sawing capacity 90 degrees 330 dia/mm Sawing capacity 60 degrees 230 dia./mm Miter +45 -+60 degrees Saw blade size 4870 x 32 (34) x 1.1 Stepless cutting speed 20-90 m/min Total power 4.1 kW NC control. Accessories: Extra blades 2 pcs Length: 2484 mm, Height: 1636 mm, Width: 2477 mm, Weight: 1700 kg

AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw b ...

CNC sawing machine BTM 410/420 CNC max cutting diameter 420 mm

Stock number: 3900 AUTOMATIC BAND SAW Manufacturer: CARIF, Type: 320 Machines NO.: 3a52, Year of manufacture: 1995 Specifications: Size sawing capacity 90 degrees 275 dia/mm Miter Grades Saw blade size: 3025 x 27 x 0.9 Cutting speed 25-90 mm/min Total power 1.8 kW Hydraulic. Accessories: Cooling water system. Runway. Hydraulic vise. Length: 1900 mm, Height: 1200 mm, Width: 1800 mm, Weight: 1200 kg

For sale Doall Band Saw Machine Type C-5650NC, Technical Data ; Maximum around 500 mm Maximum rectangular 610×560 mm Maximum bundle size 480 x 260 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre rolling table, a chip conveyor, a variable vise pressure control, a double-retractable index vise, work lighting and a toolbox. Standard PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Stepless belt speed, controlled by inverter Impeller motion detector with knife blocking and band break switch Automatic shuttle feed and sliding work table with roller Hydraulic Belt Tension Two-stage helicopters Split Front Vise Double retracting index vise Working height sensor and ...

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...

cutting diameter: max. 250 mmfeed:: . accessories:: Ersatzbänder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article number: 19-03-029 Manufacturer: Forte Good general condition Delivery time: immediately available Machine workshop tested Year of construction: ca.1975 L x W x H: approx. 1900x1600x1650mm Weight: approx. 1000kg Saw blade dimensions: approx. 3660x27x0.9mm Cutting range: Round: approx. Ø 250mm Square: approx. 250x250mm Flat: approx. 270x250mm Automatic material feed: approx. 3 - 400mm Cutting speed: approx. 10 - 70 m/min Drive power: approx. 3.5 kW Accessories  Coolant facility  Documentation  Piece count counter  Roller block Other accessories on request Price and other technical data on request

cutting diameter: / mmsaw band length: / mmcutting width: / mmThe machine is under power and ready to run.Only the machine is for sale (without roller gears)Type 1 MF 420 ACNMachine frame 3055year of construction 2000Electrical data 8 kW / 20 Amax. belt length 5,500 mmPhases 3 x 400 V / 50 Hzincl. documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: / mmsaw band length: / mmcutting width: / mm Type 2MF650 ACN Serial number 2511 Year of manufacture 1997The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: mmsaw band length: mmcutting width: mmControl: total power requirement: kWweight of the machine ca.: trequired space: mHorizontal-Bandsägemaschinen, Geradschnittbandsäge, 2-Säulen-Ausführung vollautomatische AusführungBandlänge: 4240 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...

Offer 24149 Specifications: - Cutting range at 90° around 320 mm - flat 300 x 270 mm - Material replenishment stroke up to 500 mm - Unlimited multi-stroke - Remnant length in automatic mode 125 mm - Saw blade dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise -Conveyor - Saw blade cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

cutting diameter: 320 mmsaw band length: 4120 x 27 x 0,9 mmtable height: 450 mmcapacity 90 degrees: flat: 450 x 320 mmband speed: 17 - 106 m/minsawing motor: 2,85 kWlength of draw-in: mmweight of the machine ca.: 0,6 tdimensions of the machine ca.: 2,0 x 1,2 x 1,2 mMiter band saw- Spray mist device- Material detection when loweringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmsaw band length: 3660 mmtable height: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KASTO HBA 1060/1260 AU metal band saw built in 1995 in Germany is used for precision cutting of round, square and flat workpieces. The robust design in combination with the reliable 11400 mm long saw blade allows fully automatic cutting of even the hardest materials, i.e. titanium, at a constant 90° angle. Machining is free of any vibration and oscillation, resulting in exceptional process stability during even the most intensive tasks. The KASTO dual-column band saw weighs 19000 kg. Technical data of the KASTO HBA 1060/1260 AU bandsaw - NC controller - cutting capacity at 90° (round): ⌀ 1060 mm - cutting capacity at 90° (square): 1060 x 1060 mm - cutting capacity at 90° (rectangle): 1260 x 1060 mm - cutting speed: 16-80 m/min - work table dimensions (L x W): 2500 x 1250 mm - maximum workpiece weight: 20 t - material feed length: 2100 mm - saw blade dimensions: 11400 x  ...

CONTROLS  PLC TECHNICAL SPECIFICATION  max. cutting height: 360 mmELECTRICAL SPECIFICATIONS  total power consumption: 17 kWDIMENSIONS / WEIGHTS  total weight approx.: 2540 kg

range L-W-H: 400x300x200 mmsaw diameter: 420 mmweight of the machine ca.: 3500 kgProducer: KASTOType: HBA 420UYear of manufacture: 1985Dimensions (width x height x depth): approx. 400x200x300 cmAt7ZcqFully automatic NC horizontal bandsaw1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 3,50/2,40/2,20 mmweight of the machine ca.: 3500 kgProducer: KASTO,Type: HBA 420 AU,C93I8DeYear of production: 1995Fully automatic NC horizontal band sawwith hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off,Dimensions (width x height x depth): approx. 400x200x350 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Automatic band saw - Horizontal Manufacturer KASTO Type KastoTwin A4 Year of construction 2002 Country of origin Germany Delivery time by arrangement Freight base from location Technical details Cutting diameter 400mm Saw blade length 5,090mm Cutting width 1.3mm Cutting range at 90 degrees: around 400mm Cutting area at 90 degrees: square 400 x 400mm Smallest diameter 10mm Smallest section length 6mm Feed length 750mm Cutting speed 20 - 110m/min Clamping pressure 20 - 60bar Saw blade dimensions 5,090 x 41 x 1.3mm Total power requirement 7.0kW Machine weight approx. 1850 kg Space requirements approx. 2400 x 2500 x 1700mm

Saw blade dimensions 6096 x 38 x 1.3mmm Single feed 580mm Multiple Feed 2320mm Quantity preselection Conveyor Roller track 5000 x 640mm (all rollers are driven)

Cutting range round: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest section length: 5 mm Minimum offcut length, single cut: 10 mm Minimum off-piece length, automatic operation: 10 mm Automatic material feed single max.: 600 mm Material feed multiple 9x: 5,400 mm Belt speed: infinitely variable 15 -125 m/min Cutting feed: infinitely variable Material feed: hydraulic Automatic feed: with horizontal vice (Sp II) Material tension: hydraulic, infinitely adjustable. Resilience: Horizontal vice (Sp I) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: thanks to an easily replaceable wire brush. Via flex shaft in relation to the main drive driven. Coolant: Supplied via coolant nozzle Cool ...

Cutting range round: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest section length: 5 mm Minimum offcut length, single cut: 10 mm Minimum off-piece length, automatic operation: 110 mm Automatic material feed single max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: infinitely variable 15 -125 m/min Cutting feed: infinitely variable Material feed: Ball screw Automatic feed: with feed vice (Sp II) Material tension: hydraulic, infinitely adjustable. Resilience: Machine vise (Sp 1) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: thanks to an easily replaceable wire brush. Via flex shaft in relation to the main drive driven. Coolant: Supplied via coolant nozzle Coolant tank ...

Cutting capacity 90° round 460 mm Cutting capacity 90° rectangular 470 mm x 460 mm Stop length 500 mm Cutting speed 20 – 100 m/min Motor power of the main drive 4 kW Machine weight 1.5 t Hydraulic workpiece clamping Saw blade speed infinitely adjustable Workpiece feed by feed rollers integrated in the vise Dual column frame for outstanding stability Accessories: Feeder roller conveyor 1.2 m

Offer 25078 Specifications: - Cutting range at 90° around 550 mm - flat 570 x 550 mm - Cutting speed infinitely variable 20 to 100 m/min - Hydr. Raising + lowering the saw frame - Cutting pressure infinitely adjustable 0 to 10 m/min - Material replenishment machine - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW -Attack - 2 x roller conveyor 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

dimensions of saw-band: 2720x27x0,9 mmcapacity 90 degrees: round: 230 mmcapacity 90 degrees: flat: 300x150 mmcapacity 45 degrees: round: 180 mmcapacity 60 degrees: flat: 200x180 mm: 110 mm: 120x80 mmweight of the machine ca.: 250 kgdimensions of the machine ca.: 1500x900x1250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Meba ECO 335 DGA - Automatic band saw - Material feed up to 600 mm - Year of construction: 2002 Specifications - Cutting range 90° round/flat: 335 / 500x335 mm - Mitre right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Clamping range bundle tension width/height: 0-500 mm / 15-335 mm - Single/Multiple Material Insertion: 0-600 mm / 0-9999 mm - Leftover piece length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min (AC drive) - Cutting pressure: infinitely hydraulic - Lowering speed: 0 - 300 mm/min (infinitely variable) - Saw blade dimensions: 4400 x 34 x 1.1 mm - Saw blade tension: with torque wrench - Max. contact weight: max. 250 kg/m - Working height: 750 mm - Noise emission: 74 dB(A) Connection data: - Power supply: 3x 400 V / N / PE / 50 Hz - Compressed air: 6 - 8 bar, min. 50 l/min  ...

Automatic band saw Manufacturer: MEBA Type: MEBAeco 335 GA Year of Make: 2010 Working height: 750 mm Cutting range at 90 degrees round: 335 mm Cutting area at 90 degrees flat: 500 x 335 mm Cutting range at 45 degrees right round: 330 mm Cutting area at 45 degrees right flat: 320 x 335 mm Cutting range at 30 degrees right round: 200 mm Cutting area at 30 degrees right flat: 200 x 335 mm Saw blade dimension: 4400 x 34 x 1.1 mm Cutting speed: 15-150 m/min Total power requirement: 4.5 kW Machine weight: approx. 1550 kg

cutting diameter: 335 mmdimensions of saw-band: 4400x34x1,1 mmtable height: 750 mmmin. dia.: 5 mmcapacity 90 degrees: round: 335 mmcapacity 90 degrees: flat: 500x335 mmcutting speed: 15-150 m/minclamping range bunching voltage: 0-500 / 15-335 Breite / Höhe: 0-600 / 0-6000 Einf. / Mehrf.weight of the machine ca.: 1600 kgdimensions of the machine ca.: 200x2200x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine Metora VMB 280 including chip conveyor. Machine works in manual as well as semi-automatic mode. automatic feed is not functional. Year of construction not apparent Machine in preparation, photos to follow.

automatic feeding, chip conveyor, L-310, W-210, H- 180cm

cutting diameter: 270 mmsaw band length: 3660 mmcutting width: 0.85 mmcutting speed: 20-95 m/mintotal power requirement: 2 PSweight of the machine ca.: 1.1 tdimensions of the machine ca.: 200x170x145 cm x cm x cmSaw blades: 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.