We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
1 A+F butter carton packaging machine for 10 to 30 g parcels Capacity: 30,000 parcels/h packed in outer cartons Masch. Item No. 98097-A but without butter molding machine, is defective
used
Case Erector BEDO VA988 + Year of construction 1997 Machine no. VA 988.1.52490, serial no. 4705 Output: 20 cart./min. with automatic format change. format range: L 200-650mm W 150-460mm H 100-500mm. Carton outlet height: 600 mm Electrical data: Voltage: 400V 3 phase Frequency: 50Hz Connected load: 7.3 kVA 18 amps Operating pressure: 5-7 bar The machine is equipped with a PLC control make Siemens S 5. Machine weight: 1,500 kg machine dimensions: Length: 3000mm Depth including cardboard magazine: 2100 mm Height : 2100mm Machine weight: 1,500 kg Bottom closure with NORDSON 3400 hot-melt device. If you need more information. We are here to help! Please contact us using the contact form or give us a call
used
2x ETT Packaging Technology Tray Erector – TF 30 L (2014) + TF2 (2020) – incl. complete documentation For sale are two used, high-quality tray erectors from the renowned German manufacturer ETT Verpackungstechnik (Made in Germany). Both machines come from a company liquidation, have been dismantled and properly dismantled. They are in good, functional condition (only dusty) and have the complete documentation (layout, CE declaration of conformity, parts lists, electrical plans, operating instructions and much more). All format tools are available. Machine 1: Tray erector TF 30 L • Engine No.: 32-00-0114 • Year of construction: 2014 • Weight: 2,600 kg • Power: 15 kVA • Connection: 3x400 V/N/PE 50 Hz • Air consumption: 30 NL/min. at 6 bar • Dimensions (L x W x H): 3,677 x 1,603 x 2,408 mm Workable formats (Fefco 0453, hot melt): 1. 292 × 187 ...
used
Comarme Carton Sealer Model GEM-50/RC Condition see photos.
used
A cardboard stand for pre-glued cardboard tubes and an associated carton sealer are sold. The system was only serviced and some things were renewed by the manufacturer because the purchase of the new line was questionable. Conveyor belts are also supplied in addition to the carton erector and carton sealer. Photos to follow
used
From the dissolution of a company, we sell the following used packaging machines. All the machines offered are functional and were used during ongoing operation until the very end. If you have any questions about the individual machines, possible combinations or further details, please do not hesitate to contact us at any time. Delivery and pick-up possible by arrangement. Location: 41564 Kaarst-Holzbüttgen 1st & 2nd Simons+Harren Case Sealer NH-FJ-2 Two identical semi-automatic carton sealers, type NH-FJ-2 - 1× built in 2020 - 1× built in 2018 Technical data (both machines): - Operation: manual / pneumatic, 230 V - Closure: Scotch tape - Dimensions: L 1,160 × W 970 × H 750 mm - Box sizes approx.: L 150–∞ × W 120–470 × H 120–450 mm Price year of construction 2020: 3,000 EUR net Price year of construction 2018: 2,500 EUR net 3. Youngsunpack C ...
For sale Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line . year: 2014
used
Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Optima CMF: Packaging machine Application: For erecting and closing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics to precisely place products and accessories such as spatulas, brochures, or flip-flop sheets. Flexibility: Can also be designed for food and chemical products in other versions of the machine
used
From a current recycling we offer you a packaging system that is specially designed for the pick and place handling of spice bags (dimensions 160x110 mm). Year of Make: 2019 Condition: (indicate any defects or damage?): dismantled Hours: unknown Asking price: VHB Original price: 373.700 € Equipment / accessories / other information: Conveyor belt/belt and belt conveyor for the transport of products, conveyor width 200mm, length 4000mm. A piece of carton erector with cutting magazine for the autom. Erection of the cartons. With the help of 2 transfer robots type FANUC M2iA / 3 SL, the bags were stacked in 4 transfer chutes with the help of Vakkum suction cups. Another FANUC LRM 200 robot with gripper picks up an erected carton and moves to the transfer station, where the products are pushed into the carton. In the next step, the robot transfers the filled ca ...
used
Cylinder/flatbed die-cutter, fully functional, ready for collection immediately Min. format: 160x210 max. format: 500x700
used
Rovema GMK-9 Year of construction 1998 Carton folding and packaging machine
used
Rovema Type ETO Year of construction 2009 Outer carton folding and packaging
used
Rovema Type GS+ SPA 644+DAS 128 Year of construction 1998 Outer carton folding, lid folding and packaging
used
For sale is a used Schäfer & Flottmann tray erector with lateral insertion function for package inserts, package products such as e.g. Flower seed bags, etc., which are placed at the bottom of the tray. The tray is previously covered with an adhesive and can thus be fixed to the bottom of the tray. A vision system from Keyence uses the camera to check whether the products used have been positioned correctly. If not, the tray is ejected. In one of the following stations, products can either be inserted laterally or the tray is formed into an open tray. The Schäfer & Flottmann has run little and is in very good condition. There were 2 systems in stock and one of them has already been sold. There is a very extensive spare parts package worth about 150,000 € for the system
used
Professional packaging machine from a renowned European manufacturer: -Suitable for adhesive tape width up to 50 mm. -Maximum carton dimensions according to manufacturer's specifications approximately: width 500 mm x height 500 mm; length unlimited. -Double-sided closure of the packages at the top and bottom. -Different cardboard formats are adjusted in height and width via cranks. -Transport speed approx. 20 m / min. Output approx. 800 cartons per hour. -Working height of the machine is infinitely adjustable. The machine can be moved and locked via castors. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams.
used
Professional packaging machine from a renowned European manufacturer for adhesive tape width up to 50 mm. Maximum carton dimensions approximately: width 525 mm x height 505 mm; length unlimited. It is a robust machine for the highest requirements. -Closure of the package on both sides at the top and bottom with adhesive tapes. -Transport speed up to about 20 m/min. -Different cardboard formats are infinitely adjusted in height and width via a quick adjustment system (without crank). -The working height is adjustable from 635 to 950 mm. Special features/ options: -The scope of delivery includes an inlet track with a length of about 1 m and an outlet track with a length of about 1 m. There is a stopper plate on the run-out track, which can also be dismantled if necessary. Both roller conveyors are adjustable in height and inclination. -The machine has an adjustable closing device fo ...
Packing machine for full wrapping with sealable films and paper SOLLAS 20 for cartons length 45 – 300 mm, width 40 – 200 mm, height 16 – 96 mm. Output up to 50 pack min., Siemens control with touch screen, little used and ready for operation. The delivery of all spare parts is guaranteed by the manufacturer. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827
used
A lid/tray packer from the manufacturer Somic is sold. The SOMIC Lid/Tray Packer is suitable for open cartons and lid/tray packaging. The facility has been used very little and is in absolute top condition.
used
For sale is a used SOMIC packaging system with 2 fan conveyors (=2 formats). Tubular bags were packed, but other products that arrive horizontally from an infeed conveyor can also be packed. The Somic has a height-adjustable levelling belt where the contents of the tubular bags can be distributed before packaging. Somic had worked with Elau technology in the control area and Elau discontinued these servos and controllers. The Somic can be equipped with new Siemens control technology 1500 and undergo a general overhaul.
used
We have the Tetra Pak 32 CBP Cardboard Packer in very good condition in our warehouse. For more information, please contact us.
For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 14.326 year: 2009
For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 20.567 year: 2011
For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 21.425 year: 2011