We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg
new
10 machines in stock EISELE high-performance circular sawing machine VMS 350 das ORIGINAL - made in Weilheim/Germany Equipped to accommodate saw blades up to 350 mm in diameter. Min. / max. cutting range at: 90° 45° Round (in mm) 10 / 120 10 / 120 Square (in mm) 8 / 100 8 / 100 Rectangle (in mm) 8 x 8 / 170 x 100 8 X 8 / 120 x 100 Smaller cross-sections on request. With pole-switchable three-phase motor, 1.4/1.9 kW, including clamping device to the left and right of the saw blade, stationary base frame with built-in coolant device and chip drawer, material support height 900 mm. Sawing machine is designed for voltage mains 400 V / 50 Hz. (3LNPE400V/50Hz). Spare parts supply for 10 years. Standard version with 17/34 min-1 or 34/68 min-1 Standard version, models differ in the type of cooling
used
saw blade diameter: 275 mmcutting diameter: bis 90 mmcutting range flat: 120 x 75 mmturning speeds: 40/80 U/minmiter cut: 45°/90°/-45° °weight of the machine ca.: ca. 150 kgManual saw blade feedAccessories:Coolant deviceUnderframe with 2 drawersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
saw blade diameter: mmcutting diameter: mmstroke: mmturning speeds: 10/20 U/minengine: 380 V / 12 A total power requirement: kWweight of the machine ca.: 1-100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
saw blade diameter: 275 mmcutting diameter: 80 mmstroke: mmturning speeds: 58 U/mintotal power requirement: 0,5 kWweight of the machine ca.: 70 Kgdimensions of the machine ca.: 0,5 x 0,5 x 0,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Eisele Cold Circular Saw, BJ. 1968, Machine No. V19104
used
Eisele VMS 120 / Cold Circular Saw -Saw blade diameter: 275 mm -Saw blade speed: 40 / 80 rpm (2 stages, pole switchable) -Cutting speed: approx. 80 m/min -Drive motor: 380 V (three-phase current) - Power: 1.0 / 1.2 kW -Cutting range at 90° (round material): max. Ø 90 mm -Cutting range at 90° (square/rectangle): max. 75 × 75 mm -Cutting range at 45° mitre (rectangle): max. 75 × 75 mm -Coolant device -5x circular saw blades -Material stand Dimensions: LxWxH 0.7x0.6x1.5 meters / Weight 180Kg
used
saw blade diameter: 315 mmcutting diameter: 90 mmstroke: mmturning speeds: 40/80 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 650 Kgdimensions of the machine ca.: 0,9 x 0,8 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
saw blade diameter: 250 mmcapacity 90 degrees: round: 70 mmcapacity 90 degrees: square: 65 mmturning speeds: 52 / 104 U/mintotal power requirement: kWweight of the machine ca.: 0,13 tdimensions of the machine ca.: 800 x 600 x 1500 mManual cold circular saw with:- Mitre 45°/45°- Machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: U/mintotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 1,8 x 1,95 mAutomatic circular saw with- Feed roller conveyor 1500- Roller conveyor with stop 1000mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 245 x 40 mm 2 cutting speeds by pole-switchable motor: 9 and 18 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm
used
Ref.Nr. 00847 Name of the system Used robust cold circular saw Manufacturer: Kaltenbach Model KKS 400 H Year of manufacture 1985 Research: Saw blade diameter diameter: 400mm Cutting diameter: approx. 130mm Stroke: 150mm Total power: 1.8/2.7 kW Weight: 850kg Dimensions approx. 1205 x 1005 x 1705mm Cutting range 90 degrees square 120x120mm Cutting area 90 degrees flat 315x40mm Cutting speed: 10-40m/min Operating Voltage 380V 3~/50Hz Submission date immediately
used
saw blade diameter: 400 mmmiter: . : Kühlung weight of the machine ca.: 1 tnumber: 4 Stück The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting speed: 30 - 130 m/mintotal power requirement: 1,5 / 2,6 kWweight of the machine ca.: 0,55 tdimensions: 1,2 x 0,8 x 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cold circular saw Make: Kaltenbach Type: KKS EG-H/M45NC Built in 1995 Semi-automatic cold circular saw Vertical saw with cut from below and rotating saw table -Saw blade Ø 400 mm -Hydraulically adjustable saw blade feed -Coolant pump for coolant flow -Pin and chip scraper -Adjustable workpiece stop for using the full working width -Rotary table for oblique and longitudinal cuts, rotation range 90° to each side Max. sawing capacity: Fl. 300x40 mm, or 120x120 mm Height: 1860 mm Width: 1070 mm Depth: 800 mm Weight: approx. 900 kg with infeed roller conveyor 6 m and with discharge roller conveyor 3 m with controlled measuring carriage (M45NC) programmable, automatic operation little used Technically good condition Visually good condition Machine is still in commercial use and can be viewed by appointment. Transport from the hall a ...
used
cutting diameter: 260 mmserial number: 109967 volt: 380 Vfrequency: 50 Hzweight of the machine ca.: 500 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: U/mintotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 1,8 x 1,95 mAutomatic circular saw with- Feed type RB 1500- Roller conveyor 1500mmGood conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
saw blade diameter: 380 mmpneumatic clamping: ja weight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Very well-preserved circular saw with two speeds and adjustment to 45°
used
380 V 1.5 KW Length 0.6 m Width 0.5 m Height 1.40 m Color: Gray Weight 98 kg Unaudited Hobbyist object
used
saw blade diameter: 350 mmType of input current: dreiphasig mitter cutting - all-position: -45 bis + 60 °Max. sawing capacity: 95 x 95 mmweight of the machine ca.: ca. 480 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
saw blade diameter: 370 mmcutting diameter: 120 mmstroke: 370 x 32 x 3 mmControl: total power requirement: 5,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Aluminium circular saw, semi-automatic aluminium underfloor circular saw for mitre cuts 0 to 67.5 degrees to the left and right - Machine with solid cast construction - Large solid rotary table - 7 main angles with fixed stops - Mitre 0 to 67.5 degrees left and right - 2 pneumatic vertical and horizontal vises - Two-hand safety control - Infinitely adjustable saw blade feed Great condition, machine hardly used. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Saw blade: 500 mm Colour: blue/yellow Total power requirement: 380 V Weight: 550 kg Dimensions: 1140 x 1150 x 1740 mm Speed min./max.: 2860 Cutting area at 90 degrees square 160 x 160 mm Cutting area at 90 degrees rectangular 260 x 100 mm Cutting area at 45 degrees square 145 x 145 mm Cutting area at 45 degrees rectangular 185 x 100 mm Angle a ...
used
16 A plug Saw blade housing right. side replaced by steel plate. Length 0.8 m Width 0.65 m Height 1.40 m Weight 200 kg