We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
ADIGE TT640 circular sawing machine was built in 2009 in Italy by ADIGE S.p.A. The machine enables precise, automatic cutting of a wide range of metal workpieces, such as bars, tubes and profiles. Solid, square and rectangular sections are machined by means of a cutting disc with a maximum diameter of 275 mm. It ensures high repeatability and cutting precision in both unit and series production. The ADIGE TT640 is equipped with a feeder that facilitates the loading of material into the workspace and enables continuous machine operation. The intuitive SIEMENS SIMATIC PANEL HMI control panel enables precise programming and control of process parameters, ensuring user-friendly operation. All this is complemented by an extremely rigid design that maintains high operational stability even during the most intensive use. The ADIGE TT 640 automatic circular sawing machine weighs 1350 kg. T ...
used
The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power ...
used
Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile
used
FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...
used
METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...
used
OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...
used
GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...
used
GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. ...
used
SOLID SC 275 Fully Automatic Metal Circular Saw – Automatic Circular Saw with Coolant Device For sale is a robust, fully automatic SOLID SC 275 metal circular saw in a heavy-duty industrial version. The machine has an automatic cutting sequence, automatic material feed and an integrated coolant device for cooling and lubricating the saw blade during the sawing process. Ideal for series production, metalworking companies, locksmiths and workshops. Technical data / equipment: Manufacturer: SOLID Type: SC 275 Machine Type: Fully Automatic Metal Circular Saw Automatic cutting sequence Automatic material feed Manual pruning and test pruning Adjustable cutting pressure Material clamping device Integrated coolant device with coolant pump Electric control with control panel Solid and stable industrial design Three-phase connection Conditio ...
used
Automatic with power gearbox also for high-alloy materials.