We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Specifications Working range 250 × 700 mm Copying table size 430 × 600 mm Stroke / working area longitudinal (X) approx. 322 mm Stroke / working area transverse (Y) approx. 200 mm Spindle drive / power approx. 1.5 / 1.7 kW Spindle speed (spindle speed) approx. 80 – 20,000 rpm Copy scale ratio (enlargement / reduction) 1:1 to 1:4 Overall dimensions (approx.) 2,000 × 2,000 × 2,000 mm Weight approx. 1,650 kg
used
Speed: 12,000 revolutions per minute Pneumatic material clamping via foot switch Minimum quantity spraying device Milling area: 300 x 120 mm Stroke: 115 mm Weight: approx. 200 kg
used
x-travel: 230 mmy-travel: 90 mmz-travel: 110 mmturning speeds: 12000 U/mintotal power requirement: 0,74 kWweight of the machine ca.: 120 kgdimensions of the machine ca.: 600 x 550 x 1300 mmWhile stocks last4x hinges the pallet frames are foldableWeight: approx. 9.5 kgfor 1200x800x200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
3-sided machining in one clamping Speed: 12,000 revolutions per minute 2 pneumatic copy pins at the bottom, 1 copy pin at the top Pneumatic material clamping Minimum quantity spraying device Milling area vertical (top): 330 x 130 mm Milling area horizontal (from front or rear): 220 x 95 mm Stroke: 110 mm With lateral stops Weight: approx. 350 kg
used
Lg.Nr. 26305 Technical data: - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Workpiece width / clamping range W 115 x D 100 mm - Milling area at the top after stop / copy template. W 340 x D 100 mm - Stroke at the top T 110 mm - Milling area at the bottom after stop / copy template. W 240 x 90 mm - Stroke bottom front / rear 95 / 45 mm - Spindle speed 12000 rpm - Dosing spray device - Air consumption per work cycle - without spraying 12 ltr - with spraying 24 ltr - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. W 900 x H 1400 x D 1250 mm - Weight approx. 300 kg
used
Profile height: max.150 mm Profile width: max. 300 mm Milling area: 365 x 230 mm Pneumatic workpiece clamping Minimum quantity spraying device 2 pneumatic copy bolts with copy pin 5/ 8/ 10 mm
used
Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system
used
Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg
used
For sale is a tested single-spindle copy milling machine from the manufacturer Rotox, type KF 347, built in 2004. The machine has been tested for individual functions: the motor is running, the clamping cylinders are working, the rotary mechanism is working properly, the spraying and the four pneumatic copy bolts are also working well. A new gas pressure will be applied at no extra charge prior to delivery. At the customer's request and for an extra charge, the horizontal shaft guide rails infested with flash rust can also be replaced. A complete cleaning of the machines is not planned. All information without guarantee. The machine can be shipped throughout Germany for 150.00 euros net. The price shown is a VB net price. The machine is sold on account with VAT. Payment can be made in cash on site or by prepayment.
used
3-spindle copy milling machine with stops for aluminium and plastic profiles Maximum spindle speed: 12,000 rpm Stop arms right and left Good condition