milling machines used for sale

Table dimensions ... 900 x 500mm Axis X ... 700mm Axis Y ... 500mm Axis Z ... 500mm ISO 40 Spindle speed ... 0-3150 rpm L x W x H ... 2220x2115x2120mm Machine weight ... 2550kg The machine is in good condition, possible to test under power.

x-travel: 1190 mmy-travel: 530 mmz-travel: 540 mmtable-size: 1600 x 400 mmspindle drive: 11 kWtool taper: ISO 50 turning speeds: 28-1400 U/minfeeds: 16-800 mm/Utotal power requirement: 21 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain ... TNC 426 Table dimensions ... 6020x1060mm Axis X ... 8300mm Axis Y ... 760mm Axis Z ... 1200mm SK 50 Spindle speed ... 5-2000 rpm. Max.table load... 8000kg Machine weight ... 36000kg The machine is in good condition, possible to sample under power.

Key data: 600 mm, 700 mm, 600 mm

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 60 P duoBlock NEW DMG Design With track control Heidenhain iTNC 530 Year of Make: 2010 Travels: X 600 Y 700 Z 600 Speed range: 0 – 12,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC rotary table 630 mm clamping surface (table load max. 700 kg) Universal milling head with controlled B axis Universal tool changer with 40 magazine positions as a double gripper ( SK 40 ) Full protection cabin with sliding doors and interior lighting IKZ – 40 bar with paper belt filter Conveyor Rotoclear 3 D Probe Heidenhain TS 649 Electronic handwheel Operating mode 3 + 4 Oil mist extraction Coolant spray gun 3-Piece Height Adjustable Machine Shoes Operating instructions

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 85 monoBlock NEW DMG Design With track control Heidenhain TNC 640 Year of manufacture: 2018 Travel: X 935 Y 850 Z 650 Speed range: 0 – 20,000 rpm continuously variable (HSK 63) With the following accessories: NC swivel rotary table 1000 mm x 750 mm clamping surface 3 D Probe Infrared Heidenhain Vertical tool changer with 90 magazine positions (HSK 63) Chip flushing in workroom door Chip rinsing gun with pump 1 bar/40 l min Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar with paper belt filter Conveyor Rotoclear Coolant Setup Spindle Oil Cooler Oil mist extraction 3-Piece Height Adjustable Machine Shoes Control cabinet cooling unit (Rittal) Operating instructions

Tool milling machine Deckel FP 3 partially overhauled Article number: 07-07-091 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: approx. 1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories: Vertical & horizontal milling equipment Coolant Facility New Complete documentation Various tension wrenches Horizontal spindle cover cap Safety handwheels  ...

Article number: 07-07-110 Manufacturer: Lid Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1981 L x W x H: approx. 2000x1500x1800mm Weight: approx. 800kg Specifications: Travel: X-axis: approx. 400mm Y-axis: approx. 200mm Z-axis: approx. 400mm Table clamping surface: approx. 700x350mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 8-400mm/min Rapid traverses: approx. 1.5m/min Accessories  Vertical & Horizontal Milling Device  Work light  Coolant facility  Complete documentation  Various tension wrenches  Spindle protection cap  Horizontal spindle cover cap  Chip tray  Machine feet  Safety handwheels  3-axis digital display SIN ...

Article number: 07-07-109 Manufacturer: Lid Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1985 L x W x H: approx. 1600x1200x1700mm Weight: approx. 650kg Specifications: Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 300mm Y-axis: approx. 150mm Z-axis: approx. 340mm Table clamping surface: approx. 600x250mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 1.9 kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range (infinitely variable): approx. 5-500 mm/min Rapid traverses: approx. 1.2 m/min Accessories  Vertical & horizontal milling device  Coolant facility  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  NOT – Off  Sp ...

Article number: 07-07-108 Manufacturer: Lid Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1985 L x W x H: approx. 1600x1200x1700mm Weight: approx. 650kg Specifications: Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 300mm Y-axis: approx. 150mm Z-axis: approx. 340mm Table clamping surface: approx. 600x250mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 1.9 kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range (infinitely variable): approx. 5-500 mm/min Rapid traverses: approx. 1.2 m/min Accessories  Vertical & horizontal milling device  Coolant facility  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  NOT – Off  Sp ...

Tool Milling Machine Cover FP1 / 3-Axis Active Article number: 07-07-107 Manufacturer: Lid Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: approx. 1987 L x W x H: approx. 1600x1200x1700mm Weight: approx. 650kg REQUEST MACHINE CONTACT Download product data sheet Specifications: Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 300mm Y-axis: approx. 150mm Z-axis: approx. 340mm Table clamping surface: approx. 600x250mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 1.9 kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range (infinitely variable): approx. 5-500 mm/min Rapid traverses: approx. 1.2 m/min Accessories  Vertical & horizontal milling device  Coolant facility  Complete documentation   ...

Article number: 07-07-106 Manufacturer: Lid Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: approx. 1987 L x W x H: approx. 1600x1200x1700mm Weight: approx. 650kg Specifications: Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 300mm Y-axis: approx. 150mm Z-axis: approx. 340mm Table clamping surface: approx. 600x250mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 1.9 kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range (infinitely variable): approx. 5-500 mm/min Rapid traverses: approx. 1.2 m/min Accessories  Vertical & horizontal milling device  Coolant facility  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  NOT – Off  ...

Manufacturer: WMW Ruhla Designation: FUW 250 / IV Stock number: 1028 x-travel: 400 mm Y-travel: 250 mm z-travel: 300 mm Tool holder: ISO 40 Spindle speeds: infinitely variable: vert. 45...2240 rpm Spindle speeds - infinitely variable: horiz. 45...2240 rpm Milling head - swivel +/-: 360 ° Clamping surface: 630x345 mm Table load: 120 kg Feed: 6.3...1250 mm/min Distance between stand and table edge: min/max:155/500 mm Distance spindle/table: horiz. 38...438 mm Vertical movement of the milling spindle: stroke 80 mm Distance spindle/table: vert. ... 400 mm Total power requirement: approx. 7.0 kW Machine weight approx.: approx. 1.45 t Approx. space requirement: L:1.45xW:1.4xH:1.75 m

Key data: 500 mm, 450 mm, 400 mm

CNC universal milling machine DECKEL MAHO DMU 50 NEW DMG Design with track control Heidenhain iTNC 530 HSCI Year of Make: 2012 Travel : X 500 Y 450 Z 400 Speed range : 0 – 18,000 rpm infinitely variable With the following accessories: Swivel rotary table for 5-axis simultaneous machining Ø 630 mm x 500 mm Layer transformation 3 D Probe Heidenhain Electronic handwheel Operating mode 3 + 4 Vertical tool changer with 30 magazine positions Conveyor 3-fold status light 4 Height Adjustable Machine Shoes Coolant Setup Operating instructions

Article number: 07-07-085 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Safety handwheels  Horizontal spindle cover cap  3-axis digital display SINO New  Machine feet  Tilting swivel table  electrically moni ...

Article number: 07-07-171 Manufacturer: Mikron Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1700x1800x1800mm Weight: approx. 1500kg Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 500mm Y-axis: approx. 500mm Z-axis: approx. 380mm Table clamping surface: approx. 700x500mm Spindle: Speed range: approx. 50-2240 rpm Tool holder: ISO 40 Drive power: approx. 3.5kW Feeds & rapid traverses: in all 3 axes Feed range: approx. 1-630mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Angle milling head with drill quill  Coolant device  Complete documentation  Various tension wrenches  Work light  Various tool holders Other accessories on request Price and other technical data on re ...

Article number: 07-07-090 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  3-axis digital display SINO New  Tilting swivel tab ...

Article number: 07-07-091 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  3-axis digital display SINO New  Machine feet New  ...

Article number: 07-07-235 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1988 L x W x H: approx. 2300x1800x1800mm Weight: approx. 1750kg Digital display: 3 – axes – ACTIVE – digital display Heidenhain (TNC 113) Travel: X-axis: approx. 500mm Y-axis: approx. 400mm Z-axis: approx. 400mm Table clamping surface: approx. 700x400mm Spindle: Speed range: approx. 50-2500 rpm Tool holder: ISO 40 Drive power: approx. 6.0kW Tool clamping: automatic Feeds & rapid traverses: in all 3 axes Feed range: approx. 8-630mm/min Rapid traverses: approx. 3.0m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Horizontal – Spindle Cover Cap  Safety handwheels  Central lubricatio ...

Article number: 07-07-112 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1978 L x W x H: approx. 2000x1500x1800mm Weight: approx. 800kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 400mm Y-axis: approx. 200mm Z-axis: approx. 400mm Table clamping surface: approx. 700x350mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 8-400mm/min Rapid traverses: approx. 1.5m/min Accessories  Vertical & horizontal milling device  Work Light New  Coolant Device New  Complete documentation  Various tension wrenches  3-axis digital display SINO New  Spindle protection cap  Horizontal spindle cover cap � ...

Key data: 1000 mm, 370 mm, 430 mm

Article number: 07-07-116 Manufacturer: Reckermann Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 3300x2200x2200mm Weight: approx. 3100kg Controls: Heidenhain Travel: X-axis: approx. 1000mm Y-axis: approx. 370mm Z-axis: approx. 430mm Spindle: Speed range: approx. 48-2100 rpm Tool holder: ISO 40 Feeds & rapid traverses: in all 3 axes Feed range (infinitely variable) Longitudinal: approx. 10-1000 mm/min Feed range (infinitely variable) Transverse: approx. 10-1000 mm/min Feed range (infinitely variable) vertical: approx. 4-400 mm/min Longitudinal rapid traverse: approx. 5000 mm/min Rapid traverse transverse: approx. 5000 mm/min Vertical rapid traverse: approx. 2000 mm/min Accessories  Various tool holders  Complete documentation  Various tension wrenches  Machine feet  ...