DIGIMA FS1530C CNC router was built in 2017 in Poland by Digima DC sp.
z o.o. The machine is designed for precision milling, cutting and
engraving of materials such as wood, MDF boards and plastics. Its wide
range of machining capabilities makes it an excellent solution for
businesses operating in various industries.
Machining is performed using an HSD spindle with a maximum speed of
24000 rpm and tools taken from a 10-position magazine. The installed
inverter allows the spindle speed to be adjusted according to the type
of machining operation. The spindle is also equipped with an air
cooling system, which helps maintain suitable operating conditions
during intensive use.
Workpieces are clamped on a vacuum table with a length of 3050 mm and
a width of 1550 mm. Pneumatically extendable positioning bases
facilitate the correct alignment of the workpiece along the X and Y
axes. The vacuum is generated by two BECKER KVT 3.140 vacuum pumps,
and its level is monitored using pressure gauges.
The design of the DIGIMA FS1530C machine is made of welded steel
subjected to vibratory stress relieving. The linear axes are driven by
YASKAWA servo motors. Helical racks are used in the X and Y axes,
while a ball screw is used in the Z axis. This drive system ensures
precise movement of the head during machining. Linear guides with an
automatic lubrication system, in turn, reduce the need for
maintenance, making the machine easier to operate on a daily basis.
The DIGIMA FS-1530C Maxi-Cut router is operated using an SYNTEC 11MA
industrial controller and CAD/CAM software. The control system is
housed in a freestanding control cabinet fitted with components from
reputable manufacturers. Its design reduces vibration and protects the
components from overheating and external factors. The machine’s
equipment also includes, among others, a creasing head, an oscillating
knife and a 3 kW chip extraction unit. The FS1530C CNC milling machine
weighs approximately 1700 kg.
Technical specifications of the DIGIMA FS1530C CNC router
- feed in the X/Y/Z axis: 3000/1550/200 mm
- rapid traverse in the X,Y,Z axis: 60 m/min
- maximum working speed: 35 m/min
- worktable dimensions (L x W): 3050 x 1550 mm
- working area (L x W x H): 3000 x 1530 x 180 mm
- maximum spindle rotational speed: 24000 rpm
- spindle speed adjustment: inverter
- spindle taper: ISO30
- spindle drive power: 9 kW
- servo drive: YASKAWA 750 W (4 units)
- double-sided drive on the Y-axis
- positioning accuracy: ± 0,05/300 mm
- power supply: 380 VAC
- dimensions (L x W): 3660 x 2560 mm
- weight of the DIGIMA FS1530C machine: approx. 1700 kg
Equipment of the DIGIMA milling machine
- CNC controller: SYNTEC 11MA
- CAD/CAM software: UCanCam Professional
- HSD spindle with air cooling system
- 10-position linear tool magazine
- 8-section vacuum worktable with T-slots
- EOT-3 oscillating knife
- TCT-2 creasing head
- vacuum pump: BECKER KVT 3.140 (2 units)
- tool length sensor
- single-sided light curtain in the X-axis
- 3 kW chip extraction system
- marker detection system (CCD camera)
- control cabinet
- handwheel
- spindle housing
- THK guides with automatic lubrication