used DECKEL for sale

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Power-operated tool clamps horizontally and vertically - Automatic speed manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual  ...

Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool  ...

Inv. Num. : 8185 Type: FP 3 NC Producer: Deckel Generated: Parameters: Work table length: 700 mm Work table width: 460 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 400 mm Y-axis travel: 400 mm Travel Z axis: 340 mm Machine height: 1800 mm Machine length: 2000 mm Machine width: 1400 mm Machine weight: 1900 kg

Control: Dialog 11 Travel X/Y/Z: 710 x 600 x 445 mm Rigid angle table 1000 x 550 mm Spindle speed 6,000 min-1 Tool holder SK 40 Head swivel Bevel gear worn at the front

Control: Dialog 11 Specifications: Travel paths X/Y/Z: 560 x 500 x 450 mm Rigid angle table 900 x 530 mm Spindle speed 4,000 min-1 Tool holder SK 40 Head swivel

Travel x/y/z 300 mm / 160 mm / 340 mm Tool holder SK 40 Machine weight approx. 950 kg Accessories: Digital display Fabr. Heidenhain Remarks: The second motor stage is not available due to an electrical fault active

Specifications: Manufacturer: Lid Type: FP1 Travels: X 300 mm Y 160 mm Z 290 mm Work spindle: 40 – 2,000 rpm Tool holder: SK40/20×2 Work table: 600 x 195 mm Dimensions and weight Weight: approx. 800 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Optics attachment kit Various accessories

1 pcs used tool milling machine Make of lid Model FP 3 A Control Dialog 11 Technical data: Travel X,Y,Z 400,300,400 mm Clamping area 700 x 400 mm Quill stroke 80 mm Spindle drive 3kW Speed 3150 rpm Spindle holder SK 40 Machine dimensions L x W x H 2400/2200/1900 mm Machine weight approx. 2500 kg, Accessories: Grundig Dialog 11, fixed angle table, electronic handwheel, documentation Errors of technical data and prior sale excepted

Digital Travel paths X/Y/Z: 400 x 200 x 400 mm Table size 700 x 330 mm Tool holder ISO 40 Vise, hydraulic Refurbished in 2019

Machine : Vert. Head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, DECKEL, of FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivelling, price: 1200,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1200,- Would also have milling spindles - SK30 - SK40

Nice machine, but parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, electrical parts, control panel, ... or to convert to new control !

Heidenhain 3-axle Aktiv_Digitalanzeige Spindle speed 25 - 2500 rpm, Tool holder SK40 Feed rate 5 - 2500 mm/min infinitely variable in 3 axes Rapid traverse 1.5/min all axes Travel X/Y/Z 1200/300/400 Quill vertical/horizontal 100 mm Rigid angle table 1400 x 550 mm, max. load 3000 kg Weight approx. 2300 kg incl. coolant device, central lubrication Very good technical condition! The machine was checked and partially overhauled. A viewing under power is possible at any time. If you have any questions, please feel free to contact Mr. Zölch: 09631/7020-28 This will of course be shown in the invoice. Transport is possible. Please inquire. Price 26900,- plus VAT

Deckel FP1 - 3 Axis Active Digital Tool Milling Machine Original well-maintained condition from educational institution

Article number: 07-07-181 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request Year of construction: ca.1978 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display SINO New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Feeds & rapid traverses: in all 3 - axes Feed range: approx. 10 - 500 mm/min Rapid traverses: approx. 1.5 m/min Accessories  3-axis digital display SINO New  Vertical & horizontal milling device  Work light  Coolant facility  Complete machine documentation  Various tension wrenches  Spindle protection cap  Horizontal spindle cover cap  Chip tray  Emergency Off  Machine feet New Other accessories on re ...

DECKEL FP2 Tool Milling Machine x-travel: 400 mm y-travel: 200 mm z-travel: 400 mm Table clamping surface 800x 285 mm Spindle holder ISO 40 Spindle speeds 40 - 2000 rpm Quill stroke 70mm B7Xiqgjjzi Total power requirement 2.2 kW Machine weight approx. 1.1t Space requirements approx. 1.3 x 1.2 1.8 m Tool milling machine with: 3-axis digital display - Universal milling head - Steel cover for Z-axis - External control cabinet

Tool milling machine Deckel FP 3 partially overhauled Article number: 07-07-091 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: approx. 1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories: Vertical & horizontal milling equipment Coolant Facility New Complete documentation Various tension wrenches Horizontal spindle cover cap Safety handwheels  ...

Dividing head DECKEL Center height 90 mm Spindle Passage in Pull Tube 25 mm Gear ratio 40 : 1 Weight approx. 41 kg

Deckel FP NC Measuring Microscope Hensold Wetzlar MZM30 with SK40 DIN Cone with Gripper Groove

Handwheel Dialog 4/11 - Contour3 Two available, one in very good condition, the second is new NOS!

Cover FP42NC 2387 X-Axis Ball Screw with Nut new! Number according to spare parts plan: 2388-002435 Shipping by arrangement

Cover FP42NC built in 1987 with control conversion TNC321 Control Heidenhain TNC321 with handwheel / plain text and DIN ISO programming + network Speed 31.5 - 6300 rpm Feed rate 2 - 3600 mm/min infinitely variable Rapid traverse 4000 mm/min Extendable quills vertical 80 mm, SK40 with clamping system DIN 2080 or DIN 69872 Axes X/Y/Z 1170/500/370 mm Rigid angle table 1400 x 555 mm, max. load 2000 kg Machine freshly serviced and mechanical service with wedge bar adjustment by Franz Singer. The control system conversion took place in November 2023. The TNC321 is an up-to-date controller with similar operation to the iTNC530 or TNC640 and network connection. The machine is equipped with a splash guard cabin and can fully exploit its strengths in the production of individual and fixture parts.

Lid FP2A from vocational training center freshly serviced in top condition x-travel 300 mm y-travel 300 mm z-travel 400 mm Spindle holder ISO 40 Spindle speeds 40 - 3150 rpm Table size 620 x 390 mm Feeds infinitely variable 4 - 4000 mm/min CNC control Heidenhain TNC320 / control conversion 2023 Handwheel HR410 Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Footprint 1.9 x 2.0 mm Control cabinet 1.90 x 0.75 x 1.05 m Dimensions approx. 2.9 x 2.7 x 2.0 m

Lid FP2A from vocational training center freshly serviced in top condition x-travel 300 mm y-travel 300 mm z-travel 400 mm Spindle holder ISO 40 Spindle speeds 40 - 3150 rpm Table size 620 x 390 mm Feeds infinitely variable 4 - 4000 mm/min CNC control Dialog4 (software update) Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Footprint 1.9 x 2.0 mm Control cabinet 1.90 x 0.75 x 1.05 m Dimensions approx. 2.9 x 2.7 x 2.0 m

Machine Type: Milling Machine Manufacturer: Lid Type: FP1 Year of manufacture: unknown Condition: used Offer will only be sent if a complete imprint is provided! Price 5,750 euros incl. VAT 4.832 Euro net plus 19% VAT Location Warstein , Germany Reference M-DEC-1124 DESCRIPTION We offer you a used milling machine from the manufacturer Available now. Accessories are also available for an extra charge. See last picture. - Machine vise - Tool holders - Recording of the shelf of Bedrunka and Hirth -Tools Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Dialog 11 Control Travels 1200 x 600 x 500 Max. spindle speeds 5000/rpm Spindle drive 12 kW Tool holder SK40 Quill stroke 80 mm, weight approx. 7000 kg. Accessories el. Handwheel, coolant device. The machine is in very good condition.

The machine is in very good condition and has been regularly serviced. The operating instructions are included.

The machine is in very good condition and has been regularly serviced. The operating instructions are included.

Fully functional milling machine Deckel FP 1 We would like to point out that this machine is in excellent technical and well-maintained condition for its age (due to the IATF certification). Regular maintenance is already required on the basis of the certification and the machine therefore works 100% perfectly. The machine is still energized and can be viewed and tested at any time. All maintenance logs are in place. The machine will have to leave the hall in the first quarter of 2025. This means that the machine could remain energized until mid-March 2025 to demonstrate it under power. Of course, the machine would also be available immediately. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your answer and interest in advance.

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

Specifications: 3-axis digital display Heidenhain active Working area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle holder SK 40 Speed range n 50-2500 min-1 Feeds 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Feed length X-axis: 500 mm Y-axis feed length: 300 mm Feed length Z-axis: 380 mm X-axis travel: 500 mm Y-axis travel: 300 mm Travel Z-axis: 380 mm X-axis feed speed: 500 mm/min Y-axis feed speed: 500 mm/min Z-axis feed speed: 500 mm/min Speed (max.): 2,000 rpm Speed (min.): 40 rpm Weight: 1,250 kg Equipment: Documentation/Manual

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 3-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 3-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 2-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min

All spare parts available electrically electric Dialogue 1,2,3,4 Contour 1,2,3 Dialogue 11

Refurbished lid FP 1 for sale. - 3-axis digital display - Cooling/lubrication pump in the machine base - Overhauled 2024 - Incl. tool table and machine vice If you have any questions, please: 01728101136

Dear Ladies and Gentlemen, we sell our machine Deckel FP4 NC and associated div. milling cutter chucks. Please see the photos for details. The machine is energized and can be viewed at any time.

Milling machine Deckel FP5NC Tool holders can be added by arrangement. The machine ran without problems until the end. Machine documents are complete as far as possible. Programming instructions are included. Since the machine has been replaced by a new one, it is for sale.

Milling machine DECKEL FP5NC -axis: X-710 Y-600 Z-500

Machine Type: Graver Grinding Machine / Profile Milling Grinding Machine Manufacturer: DECKEL Model No.: S0E Year of Make: 1989 Machine No.: 89-6979 Condition: very good Offer type: used machine Specifications: Drive type: el./mech. Grinding range: 0.5 – 17.5 mm Drive: 0.55 kW Remark: Substructure 33 collets compl. Set 0.5 – 17.0 mm, disc dressing diamond, Operating tools, Machine Light, Operating instructions Weight: 125 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.

For sale good working CNC milling machine Deckel FP4 AT with two vices and several tools.

Machine Type: Graver Grinding Machine / Profile Milling Grinding Machine Manufacturer: DECKEL Model No.: S0E Year of Make: 1980 Machine No.: 80-4596 Condition: very good Offer type: used machine Specifications: Drive type: el./mech. Grinding range: 0.5 – 17.5 mm Drive: 0.55 kW Remark: Substructure with projection measuring device, 15 collets 1.0 – 17.5 mm, disc dressing diamond, additional grinding wheel holder, Operating tools, Machine Light, Operating instructions Weight: 125 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.

Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

Article number: 07-07-110 Manufacturer: Lid Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1981 L x W x H: approx. 2000x1500x1800mm Weight: approx. 800kg Specifications: Travel: X-axis: approx. 400mm Y-axis: approx. 200mm Z-axis: approx. 400mm Table clamping surface: approx. 700x350mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 8-400mm/min Rapid traverses: approx. 1.5m/min Accessories  Vertical & Horizontal Milling Device  Work light  Coolant facility  Complete documentation  Various tension wrenches  Spindle protection cap  Horizontal spindle cover cap  Chip tray  Machine feet  Safety handwheels  3-axis digital display SIN ...

Article number: 07-07-109 Manufacturer: Lid Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1985 L x W x H: approx. 1600x1200x1700mm Weight: approx. 650kg Specifications: Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 300mm Y-axis: approx. 150mm Z-axis: approx. 340mm Table clamping surface: approx. 600x250mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 1.9 kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range (infinitely variable): approx. 5-500 mm/min Rapid traverses: approx. 1.2 m/min Accessories  Vertical & horizontal milling device  Coolant facility  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  NOT – Off  Sp ...

Article number: 07-07-108 Manufacturer: Lid Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1985 L x W x H: approx. 1600x1200x1700mm Weight: approx. 650kg Specifications: Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 300mm Y-axis: approx. 150mm Z-axis: approx. 340mm Table clamping surface: approx. 600x250mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 1.9 kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range (infinitely variable): approx. 5-500 mm/min Rapid traverses: approx. 1.2 m/min Accessories  Vertical & horizontal milling device  Coolant facility  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  NOT – Off  Sp ...

Tool Milling Machine Cover FP1 / 3-Axis Active Article number: 07-07-107 Manufacturer: Lid Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: approx. 1987 L x W x H: approx. 1600x1200x1700mm Weight: approx. 650kg REQUEST MACHINE CONTACT Download product data sheet Specifications: Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 300mm Y-axis: approx. 150mm Z-axis: approx. 340mm Table clamping surface: approx. 600x250mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 1.9 kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range (infinitely variable): approx. 5-500 mm/min Rapid traverses: approx. 1.2 m/min Accessories  Vertical & horizontal milling device  Coolant facility  Complete documentation   ...

Milling Machine Lid FP1 Travel XYZ: 300x150x340mm Spindle holder: ISO 40 S20x2 Spindle speeds: 40-2000 Size of the tables: 600x260mm -Feed on X and Z axes -Vert quill with 60mm stroke -Angle table . Chip tray . With some tools . Is cleaned and maintained . Nice machine in good condition

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Tool Milling Machine Cover FP4MK 2203 Travel XYZ: 500-400-400mm Spindle mount: ISO 40 Spindle speeds: 50-2500 Table size: 800×460 Active Digital Display 3 Axes Heidenhain TNC113 Hydraulic Din Tensioners Includes angle table, vise and some tools Weight ± 1700kg Year of Make: ±1992 The machine is cleaned and tested Other accessories on request