13 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Manufacturer:
(Category: 106-515)

presses / Crank Presses
07.11.2026
approved
dealer
item-No.: 162755447
New in: 2011

used

check
Location: Land-de

Hello, Today we can offer you a high-performance crank press ERFURT Type.PDOH 630 from 2011 Offer for sale. The machine can still be viewed under power and will be sold from the site. Hello, Today we can offer you a high-performance crank press ERFURT Type. PDOH 630 from 2011 for sale. The machine can still be viewed under power and is sold from the site. ERFURT PRESS 630 TO Type. PDOH 630 Year of construction. 2011 Presskraft / Pressing power 6300 kN Table: Table Length x Width Length x Width 2900 x 1400 mm Tool installation height Tool installation height (mm). 800 mm / 926.94 mm Plunger stroke plunger stroke 350 mm/ 96.13 mm Slide stroke at the bottom, 150 mm adjustment at the top. Slide stroke bottom, 150 mm adjustment top. Stößel / Pestle Length x Width Length x Width 2900 x 1400 mm Stroke rate / 20-80 min1

presses / Crank Presses
12.11.2026
approved
dealer
item-No.: 162752550
New in: 1978

used

check
Location: Land-cz

Manufacturer: ERFURT Model: PKnT 160 Year: 1978 Condition: Used Stock number: 9542 Compressive force: 160 t Maximum stroke rate upper table: 15 1/min Ram stroke: 200 mm Adjusting the ram: 130 mm

presses / Crank Presses
19.08.2026
approved
dealer
item-No.: 162750840

used

check
Location: Land-de

We offer you a Two-column crank press ERFURT Type. PKZZ1V 500 Pressing force. 500 tons Working area 2810 x 2850 mm Sliding table 2800 x 1500 mm

presses / Crank Presses
19.08.2026
approved
dealer
item-No.: 162750841

used

check
Location: Land-de

We offer for sale . Two-column crank press ERFURT PKZZ 1V 500/2800 TS Pressing force 500 tons Working area 2800 x 2850 mm max. tool installation height 1100 mm

presses / Crank Presses
07.10.2026
approved
dealer
item-No.: 162750839

used

check
Location: Land-de

Hello, we offer you a Erfurt Crank Press, PKZZ 1V 500 Pressing force 500 tons Width between the uprights 2800 x 2800 mm Lifting of the ram 500 mm Adjustment of the ram 500 mm Distance between table and ram 1100 mm Table Sliding Table Table Surface 2800 x 2800 mm Technical information on request.

presses / Crank Presses
12.11.2026
approved
dealer
item-No.: 162752507
New in: 1983

used

check
Location: Land-cz

Manufacturer: KAISER Model: V200 WR Year: 1983 Condition: Used Stock Number: 9535 Compressive force: 200 t Table length: 1450 mm Table width: 900 mm Maximum stroke rate upper table: 150 1/min Adjustment of the ram: 100 mm Ram stroke: 20-120 mm Equipment: Sheet metal straightening roller Unwinder Workpiece feeding

presses / Crank Presses
20.06.2025
item-No.: 162722158
New in: 1972

used

Location: Land-cz

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

presses / Crank Presses
12.11.2026
approved
dealer
item-No.: 162739836
New in: 1987

used

check
Location: Land-cz

Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg

presses / Crank Presses
12.11.2026
approved
dealer
item-No.: 162740382
New in: 1956

used

check
Location: Land-cz

Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz

presses / Crank Presses
16.11.2026
approved
dealer
item-No.: 162744903
New in: 1979

used

check
Location: Land-pl
Price: 12.500 €

TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...

presses / Crank Presses
18.08.2026
approved
dealer
item-No.: 162749714
New in: 2001

used

check
Location: Land-de

Technical data Weingarten Mechanics Press 1600 to Nominal press force from 20 mm before UT 16000 kN Endurance stroke rate at idle infinitely variable 10 - 22 strokes/min Setup stroke number 5 - 10 stroke/min Plunger stroke 600 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 1150 mm Table top dimensions, length x width 3600 mm x 23 Plunger plates dimensions, length x width 3600 mm x 23 Passage between uprights in length 3650 mm Passage between the uprights in the width of 2300 mm Transfer height above press table 750 mm Quick Tension Plunger Plate: Swivel voltage, stationary 4 pcs. on each side Tool clamping flange thickness 70-0.2mm Clamping force ...

presses / Crank Presses
28.07.2026
approved
dealer
item-No.: 162749713
New in: 1999

used

check
Location: Land-de

Technical data Weingarten Mechanics Press 800 to Year of construction 1999 Nominal pressing force from 12.7 mm before UT 8000 kN Working stroke rate 10 - 40 strokes/min Setup stroke number 5 - 15 stroke/min Plunger stroke 200 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 980 mm Table top dimensions, length x width 3600 mm x 230 mm Plunger plates dimensions, length x width 3600 mm x 23 Passage between the uprights in length 3600 Passage between the uprights in width 2300 Standard infeed height above press table 750 mm Inlet height adjustment range 620 - 800 mm Quick Tension Plunger Plate: Hollow piston cylinder, variable 4 pcs. on each side To ...

presses / Crank Presses
07.10.2026
approved
dealer
item-No.: 162750842

used

check
Location: Land-de

Offer is a Weingarten crank press Type. ZS 1600.32 ex location for sale. The technical data can be found in the photos.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996