used Cycle Lathes for sale

Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%):  ...

Description Cycle lathe Chevalier FCL-2460 Details Height 1,950 mm Width 1,600 mm Length 4,100 mm Bed width 410 mm Bed height 850 mm Bed length 2,300 mm Face plate and chuck possible by arrangement max. workpiece lengths 1,500 mm Turning diameter over bed 600 mm Turning diameter over support 360 mm Center height 300 mm CNC Fagor cycle control function untested Lynette possible by arrangement 4-speed revolver

Description Cycle lathe Chevalier FCL-2660 Details Year of construction 2008 Machine no. A40307 C52 Height 2,150 mm Width 2,100 mm Length 3,900 mm Bed width 450 mm Bed height 1,000 mm Bed length 3,600 mm Face plate Ø 620 mm Forkardt Chuck Ø 315 mm Max. workpiece lengths 1,800 - 2,000 mm Turning diameter over bed 660 mm Turning diameter over support 400 mm Center height 330 mm CNC Fagor Cycle Control Lynette Ø 400 mm Outer and inner bolsters

Machine hours 1594 h Specifications: Circumferential diameter over bed: 320 mm Circumferential diameter above plan: 150 mm Wingspan, approx.: 800 mm Lathe chuck: 200 mm Turning Spindle Size: 6 Receptacle in spindle: MK 6 Speed range: 14 - 3550 1/min Plan travel: 185 mm Spindle bore: 52 mm Quill: 70 mm Quill holder: MK 5 Quill stroke: 120 mm Max. torque: 32 Nm Gear Stages: 2 Drive power: 7 kW Multifix Tool Carrier: Size B Dimensions (LxW), approx.: 2600 x 1440 x 1800 mm Weight, approx.: 1500 kg SINUMERIK 810DE-L CCU0 control system (Cycles for taper turning and thread machining)

Dimensions: - Length: 2311.4 mm - Width: 1600.0 mm - Height: 1655.0 mm - Weight: 2900.0 kg Turning Specifications: - Turning Length: 305.0 mm - Turning Diameter: 320.0 mm - Diameter Above the Bed: 510.0 mm - Diameter Above Transversing Slide: 290.0 mm - Length Between Centers: 23.0 mm Axis Movement: - X-axis Travel: 175.0 mm - Z-axis Travel: 330.0 mm Workpiece Capacity: - Maximum Workpiece Weight: 130.0 kg Spindle Details: - Spindle Bore: 53.3 mm - Spindle Motor Power: 15.0 kW - Turning Speed: 6000.0 rpm Tooling: - Number of Turrets: 12 - Number of Tools on Turret: 12 - Number of Rotating Tools: 12 Common Applications: The Lynx 220LC is widely used in precision machining industries for producing complex components with high accuracy. It is suitable for manufacturing parts in automotive, aerospace, and general engineering sectors. Turning length 305 mm Turni ...

turning diameter: 212 mmturning length: 750 mmcontrol: HEIDENHAIN Manual Plus spindle turning speed - stepless: 10-4000 U/minturret head: 8 Stationen weight of the machine ca.: 2 tdimensions of the machine ca.: 2.85 x 1.65 x 1.80 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gildemeister NEF 320 / Cycle Lathe, Year of manufacture 1999, Control Manual Plus, Center width 750 mm, Circulation Ø over bed 320 mm, Spindle speed up to 4,000 rpm, 2 gear stages, Multifix steel holder, Tailstock Accessories

Year of construction 2003 18700 Hours Hkeidenhain Control CNC 3110 Pilot Max. turning diameter over bed 320 mm Max. tool diameter over support 150 mm Turning length 750 mm Spindle speed 10 - 4000 rpm Spindle head DIN 55027, size 6 Motor main spindle 9 kW Spindle bore 52 mm Feed speed 8m/min, Z-axis 10m/min Tailstock MK5, quill diameter 70 mm Quill stroke 70/120 mm Tip height 160 mm Dimensions 2450 x 1670 x 1825 mm Weight approx. 2000 kg Total connected load 14 kVA Dimensions floor area 2540 x 1690 mm Accessories: Schunk lathe chuck ROTO-S plus, Ortlieb collet chuck, center punch tip New quick-change holder incl. 4 inserts, Multifix Spindle clearance in Z-axis .

turning diameter: 320 mmturning length: 750 mmcontrol: Siemens diameter - cutter standard: über Support 150 mmcross movement: 185 mmspindle passage: 52 mmturning speeds: 14-3550 U/mintransmission ratio: 2 quill stroke: 120 mm: 6 m/mintotal power requirement: 10 kWweight of the machine ca.: 2.000 kgdimensions of the machine ca.: 2600x1440x1440 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of Make: 2003 Spindle bore: 70 mm Center width: 1500 mm Circumference Ø over bed : 500 mm Circulation Ø over face slide: 290 mm Tip height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting MULTIFIX tool holder with 10 inserts 3 jaw chuck FORKARDT 0 250 mm ICP Contour Programming Tailstock with extendable drill quill Conveyor Coolant Setup Operating instructions

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of Make: 2005 Spindle bore: 70 mm Center width: 1000 mm Circumference Ø over bed : 500 mm Circulation Ø over face slide: 290 mm Tip height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter revolver VDI 30 with driven tools 10 VDI 30 tool holders 2 pcs of VDI 30 powered tools Coolant Setup 3 Jaw chuck SCHUNK ROTA 0 250 mm ICP Contour Programming Tailstock with extendable drill quill Chip tray Operating instructions

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of Make: 2002 Spindle bore: 70 mm Center width: 1000 mm Circumference Ø over bed : 500 mm Circulation Ø over face slide: 290 mm Tip height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 10 VDI 30 tool holders 2 pcs of VDI 30 powered tools Coolant Setup 3 jaw chuck SCHUNK 0 250 mm ICP Contour Programming Tailstock with extendable drill quill Chip tray Operating instructions

turning diameter: 410 mmgreates pass round over bed: 600 mmswing diameter over face slide: 410 mmcentre distance: 1.250 mmcross movement: 320 mmquill stroke: 80 mmSpeed range - main spindle: max. 3.000 min/-1spindle bore: 90 mmfeed speeds: max. 15.000 mm/minmachine weight ab.: 5000 kgdimensions: 5000 x 2000 x 2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Manual Plus Turning diameter 260 mm Circumferential diameter 475 mm Center width 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parachute holder Tailstock

control: HEIDENHAIN MANUAL PLUS M turning diameter over bed: 320 mmcentre height: 160 mmcentre distance: 800 mmturning dia. over face-slide: 150 mmspindle bore: 50 mmspindle taper: DIN 55027/B6 spindle turning speed - stepless: 0-4000 U/mintotal power requirement: 7 kWdimensions of the machine ca.: 400x160x190 cmweight of the machine ca.: 2.2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cycle-controlled lathe, built in 1996, Fabr. Mas Kovosite, Model Masturn 50 CNC, 1500mm with Grundig Manual Plus Please see the photos for details

turning diameter: 270 mmturning length: 400 mmcontrol: FANUC 18i Manual Guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 270 mmturning length: 400 mmcontrol: FANUC 18i Manual Guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used cycle lathe Seiger SLZ360 Built in 1999 Switch-on hours approx. 20000 h Circumferential diameter over bed 380 mm Center width 1000 mm Speed range 1-4000 1/min incl. control Heidenhain manual Plus M Parat Holder Coolant system Manual

: . centre distance: 2000 mmturning diameter: max. 570 mmspindle bore: 70 mmcontrol: 805 weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CYCLE LATHE WEILER E 35 With 2 axes Siemens Sinumerik 805 Year of Make: 1995 Spindle bore: 54 mm Center width: 950 mm Circumference Ø over bed : 410 mm Speed range: 4 – 3000 rpm With the following accessories: PARAT tool holder with 8 inserts Feed protection 3 jaw chuck 0 200 mm 4 jaw chuck 0 200 mm Fixed Lynette 12 - 150 mm Chip drip tray Chip backsplash wall with lighting Coolant Setup 4 Height Adjustable Machine Shoes Operating instructions

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of Make: 2013 Spindle bore: 66 mm Center width: 1000 mm Circulation Ø over bed : 435 mm Circulation Ø over face slide: 200 mm Tip height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix tool holder with 8 inserts 8-speed SAUTER turret with AGW and tool drive C axis via main drive 3 Jaw chuck Schunk ROTA plus 0 250 mm 5 set of soft top jaws, 1 set of hard top jaws Tailstock with extendable drill quill Coolant unit reinforced 5.5 bar Coolant spray gun Chip drip tray 5 Pcs Height-Adjustable Machine Shoes Operating instructions

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of Make: 2012 Spindle bore: 66 mm Center width: 1000 mm Circulation Ø over bed : 435 mm Circulation Ø over face slide: 200 mm Tip height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed SAUTER turret with AGW and tool drive C axis via main drive 3 pcs driven tools VDI 30 3 jaw chuck FORKARDT 0 250 mm 1 pc. fixed lynette 0 120 mm Tailstock with extendable drill quill Coolant device Coolant spray gun Chip drip tray 5 Pcs Height-Adjustable Machine Shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION THE MACHINE WAS ONLY USED FOR TRAINING THE MACHINE HAS ONLY 9044 POWER-ON HOURS

Machine is in top condition and incl. accessories ( 20 Multifix holders, 70 collets, glory chuck) , 1 - 4500 rpm, 1300 kg, can be viewed under power