used Furnaces for sale

Tempering furnace, make Aichelin Heating: electric Air circulator: 1 Temperature: 400°C Internal dimensions: (approx.) Width: 700 mm Height: 450 mmX Depth: 1300 mm X Can be increased to ~ 700 mm clear height by changing the furnace floor. External dimensions: (approx.) Width: 2200 mm Height: 2700 mm Depth: 2500 mm Heating output at 400 V = approx. 15 Y /45 Δ KW + approx. 2.2 kW for heating gas circulator + approx. 1.1 kW for door lift (The furnace is originally designed for 500 V)

El. heated pit furnace, make Aichelin type: DZLE 50/120 temperature: max. 700°C connected load: 42 kW clear ø: 520 mm clear height: 1000 mm without control cabinet

El. heated chamber furnace, make BBC Type: KEW 64 clear dimensions (w x h x d): 950 x 600 x 1600 mm temperature: 1150°C heating power: 72 kW heating zones: 2 without control cabinet

El. heated pit furnace, make Borel type: 6-72 temperature: max. 1050°C connected load: 90 kW clear ø: 850 mm clear height: approx. 2150 mm without lid and control cabinet

Plasma nitriding plant consists of: 2 pcs. hot wall double-bottom hood furnace Loading: movable hoods Volume: ø1.800 x 2.500 mm Workpiece weight (max.): 4.000 kg Wall temperature (max.): 550°C Connected load (total): 325 kW 4 pcs. batch stations 1 piece cleaning system

Powder curing furnaces in various sizes, gas or electric 1 Inner dimension length 1500 - 6,500 [mm] 2 Inner dimensions width 1700 - 1,900 [mm] 3 Inner dimensions height 2,000 [mm] 4 Steel profile substructure 5 walls Galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Floor furnace gets 2 entry rails for tray trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 electric motors 1 - 2 pcs 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal power 14 - 99 [kW] 12 hinged or sliding doors on one or both sides 2 - 4 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock Stainless Steel INOX AISI 316 Heating Electric or Gas Heat-Resistant Fans and Heat-Resistant Bearings, Thermoblock Has Overheating Protection

Temperature max: 300° Celcius Inside dimensions LxWxH: 2,000 x 2,000 x 2,000 mm Heating: Hot air Power: 75 kW Country of origin: Germany Dimensions LxWxH: 350 x 330 x 220 cm Weight: 2,000 kg

El. heated annealing furnace, make Hofmann Type: BW 2000 L Yom: 2006 External dimensions (WxDxH): 2100 x 3600 x 4200mm Weight: 6000 kg Usable space dimensions (WxDxH): 1000 x 2000 x 1000 mm Temperature: max. 800°C Batch weight: 2000 kg gross Control zones: 2 Fans: 2 x 5.5 kW Heating power: 96 kW Connected load: 250 kVA Pneumatic pressure: 6 bar Temperature control in the furnace using a program control system. Heating, holding and cooling the batch according to individually adjustable heating programs.

Case hardening system Ipsen Max. Batch dimensions (W x L xH): 685 x1160 x 750 mm Max. charge weight: 1000 kg gross consisting of: 4 gas heated multi-purpose chamber furnaces TQ-10-GRM I 4 electric tempering furnaces DL 10 1 electric pre-washer WPSD-10 E 1 electrically heated post-washer W-VCA-10-E 2 electrically heated endogas generators G-1500-E drilled out to 2000 and G-2000-E 1 batch storage place with 14 spaces on 2 levels 2 Uniloaders 10-p.t. (1 with lifting table) 1 Carb-o-Prof incl. AutoMag control system

Type: VTTCK-924-R Charge/load dimensions (W x D X H): 900 x 1200 x 600 mm Charge weight: max. 1000 kg gross Temperature range: 150-1350 °C Heating power: 270 kW Nominated power: 422 kVA Ultimate vacuum: 5 x 10-6 mbar Quenching pressure: max. 6 bar abs

El. heated gas carburizing line IVA Consisting of: 1 electrically heated IVA multi-purpose chamber furnace (270 kVA) Type: MKE 2s 70/95/110 Usable space (W x H x D): 700 x 950 x 1100 mm Batch weight: 1000 kg Oil bath capacity: 6 m3 Nominal voltage: 400 V Connection value: 270 kVA Nominal temperature: 1000°C Gassing: propane, nitrogen, ammonia, methanol 1 electrically heated IVA tempering furnace 1 electrically heated cleaning system 1 material feeding system

The IVA multi-purpose chamber furnace line consists of: - 2 pieces of second-hand multi-purpose chamber furnaces, make: IVA, type: MKG 2s, 70/95/110, year of manufacture 2007, gas heated - 1 piece of second-hand tempering furnace, type: KEL 70/95/100-500°C, electrically heated - 1 piece of second-hand protective gas tempering furnace, type: RH 70/95/110 gs, gas-heated - 1 piece of second-hand flood spray system, type: DFS 1100 - 1 piece of second-hand charging trolley, electric motor driven - 1 piece of second-hand lifting table - 1 piece of second-hand process control system PROSYS/2 with full automation - 1 piece second-hand charging magazine - incl. available spare parts

Temperature max: 700° Celcius Opening LxH: 1,500 x 30 mm Country of origin Netherlands Electrical power: 14 kW Machine LxWxH: 2,000 x 1,000 x 1,700 mm Machine weight: 1500 kg

WORKING TEMPERATURE 1st combustion chamber : 250 – 600˚C 2nd combustion chamber : 800 – 1.100˚C The thermal cleaning furnace includes a process combustion chamber with a burner, an integrated thermal oxidizing afterburner, temperature control for both burners, an air supply and a water mist injection system to control flash temperatures that can occur when processing large combustible material loads. Thermal cleaning furnaces operate according to the controlled air principle. The combustion process and temperature are controlled by restricting the air flow according to the load. Controlled air furnaces are equipped with a PLC system that displays and controls the furnace process temperatures during operation. When the set temperature is reached, the air supply is automatically restricted. When the temperature drops, the burner is reactivated and the air supply is automatical ...

Continious Brazing/Sintering furnace manufactured by Mahler. Type: Humpback (lower H2 consumption). Belt width: 450mm Clearance above belt: 200 mm Heating length: 5000mm Gross throughput: 600 kg/h Electric heating power: 198 kW Service temperature: 1140 Adjustable range of belt speed: 100-1000 mm/min Temperature cotroul groups: 5x Total length: 30m width: 1,8m height: 2,8m Hydrogen connection: 0,1bar 30Nm3/h (type 3.0) Nitrogen connection: 0,1 bar 60 Nm3/h (type 5.0) Exhaust gas : 300 m3/h Furnace is in use, and was regularly serviced. In 12. 2024 brick lining, heating elements, thermocouples, mesh belt and muffle was replaced . Spare parts are available, in case of interest, can be subject of seperate agreement. Offer includes: - Water cooling system with glicol base heat exchanger - Exhaust tubes (2x around 5m Stainless steel) - 5x sensor system to detect ex ...

Offer 20234 Technical data approx.: - Filling quantity approx. 200 L - Granulate feed via suction device - Drive power 6200 watts -Thermostat - Compressed air connection 6 - 8 bar - Mobile version - Space requirements W 1050 x H 2350 x D 700 mm - Weight approx. 180 kg

Maximum temperature: 900° Celcius Inner dimensions LxWxH: 220 x 250 x 200 mm Country of origin: Germany Weight: 300 kg Oven outer dimensions LxWxH: 1000 x 700 x 1400 mm

Specifications: Manufacturer: Nabertherm Type: N 120/A Year of Make: 1997 Control: Program Controller C40 Temperature: max. 850° Power: 13 kW Internal dimensions: 490 x 640 x 490 mm Condition Condition: Used Functional: Tested and fully functional

Offer 24460 Specifications: - Nominal / continuous temperature pre-selectable up to approx. 1150 ° - Digital temperature setting -Timer - Interior dimensions approx. W 200 x H 190 x D 350 mm - Feeding through front door - Opening width of the front door W 200 x H 190 mm - Drive 400 V / 7.5 kW - Base H 800 mm - Space requirement approx. W 900 x H 1450 x D 900 mm - Weight approx. 120 kg

El. heated annealing furnace, make Padeltherm Type: KOE 2210/1100-M Yom: 2019 External dimensions (WxDxH): 2800 x 3000 x 4130 mm Weight: 6300 kg Usable space dimensions (WxDxH): 1300 x 1700 x 1000 mm Temperature: max. 1100°C Working temperature: max. 700 – 950°C Batch weight: 1500 kg gross Control zones: 2 Heating power: 85 kW Temperature control in the furnace using a program control system. Heating, holding and cooling the batch according to individually adjustable heating programs.

Refurbished vacuum furnace Schmetz IU140/3F 2R Usable dimensions (W x H x D): 600 x 600 x 900 mm Charge: max. 600 kg gross Temperature: max. 1350°C Heating power: 140 kW Heating elements material: graphite Ultimate vacuum: 1 x 10-3 mbar Operating vacuum: 5 x 10-2 mbar Partial pressure Nitrogen/Argon: 0,1 ÷ 10 mbar Leak rate: 5 x 10-2 mbar / sec Quenching pressure: max. 6 bar abs / approx. 5,6 m3 Mechanical Pump: 560m3/h - Leybold SV200 Booster Pump: 1200m3/h – Edwards EH 1200 PLC: Siemens Controller: Demig

Inv. Num. : 8091 Type: VP Producer: SECO/WARWICK Created: 2024 Parameters: Control system: Siemens S7-1500FS series Maximum temperature: 1300 C Internal dimensions of the machine (LxWxH): 1500 x 1700 x 1700 mm Capacity: 3000 kg Working vacuum: 5x10-2 mbar

Offer 20235 Technical data approx.: - Filling quantity approx. 150 L -Thermostat - Space requirement W 1050 x H 1850 x D 800 mm - Weight approx. 180 kg

XG-25B industrial furnace is designed to heat a charge placed in an induction coil by means of high-frequency current. In this process, the AC current flowing through the primary coil generates an alternating magnetic field around the charge. This field in turn induces electromagnetic forces in the secondary circuit, resulting in the heating of the charge. This solution makes the XG-25B2 induction furnace much more efficient and economical than other furnaces available on the market. The main power and control components are IGBT and MOSFET components, which enable the unit to operate strictly within the required technical parameters. The offer also includes a water tank, water pump, table and foot switch controller. The electric induction furnace weighs just 26 kg. Technical specifications of the XG-25B furnace - input voltage: 380 V ± 10%; 50/60 Hz - input power: 5-25 kVA - outp ...

KASTENOFEN ZUM EINBRENNEN VON PTFE TEFLON BESCHICHTUNGEN Konvektionsofen zum Aushärten von PTFE-beschichteten Werkstücken Maximale Temperatur - 500ºC Heizquelle - Elektrizität Erzwungene Zirkulation Innenraum aus rostfreiem Stahlblech AISI304 200mm Dicke der Isolierung