4 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Manufacturer:
(Category: 112-1196)

gear cutting and hobbing machines / Gear Testing Machines
23.06.2025
item-No.: 162705674
New in: 1996

used


Diameter of the table top: 32 mmCenter height above table: 70 mmDiameter of the counterholder tip: 32 mmStroke of the counterholder tip: 20 mmdist. between centers: 1000 mmz-travel: 1100 mmy-travel: 230 mmtable diameter: 260 mmSpur gear module min.: 0,5/50,8 mmSpur gear helix angle: 45 °weight of the machine ca.: 1,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gear cutting and hobbing machines / Gear Testing Machines
21.09.2026
approved
dealer
item-No.: 162744002

used

check
Location: Land-de

The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptabl ...

gear cutting and hobbing machines / Gear Testing Machines
21.09.2026
approved
dealer
item-No.: 162744001

used

check
Location: Land-de

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera »  ...

gear cutting and hobbing machines / Gear Testing Machines
31.03.2025
item-No.: 162715885
New in: 2002

used

Location: Land-de

Klingelnberg ZW 301 Gear Measuring Machine Weight 750 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996