We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.
used
HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center has only been in operation for 3 minutes so far. The total weight of the machine is approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 7 ...
used
Heckler & Koch horizontal milling machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
used
HELLER H 2000 CNC horizontal machining center was built in 2022 by Heller Maschinenfabrik GmbH. The machine represents the fourth generation of the H series, specially designed for use in demanding production conditions. It is distinguished by its extensive equipment and the use of a number of state-of-the-art technical solutions that ensure reliable operation throughout its service life. The HELLER H 2000 is used for precise, 4-axis machining of workpieces with a maximum weight of 800 kg. The design of the machine provides the foundation for high productivity and machining accuracy. All structural components made of cast iron have been carefully topology optimised to ensure the highest stability and excellent force damping. Kinematics in all 4 axes, in turn, allows precise positioning of the tool in relation to the workpiece. Movement in the X-axis is carried out by a column, which s ...
used
Hermle horizontal milling machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
used
MAZAK HCN 5000 III – 2019 CNC control: MAZATROL SMOOTH G X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Pallet dimensions: 500 × 500 mm Maximum pallet load: 700 kg Pallet indexing: 360,000 positions Tool magazine: 80 tools Spindle speed: 18,000 rpm Spindle motor power: 30 kW Tool probe Spindle through-coolant: 15 bar RENISHAW preparation Electronic handwheel CONCEP chip conveyor Condition: As is
used
MITSUI SEIKI HR6A CNC machining center was built in 1984 in Japan by MITSUI SEIKI KOGYO CO., LTD. The machine is designed for precision milling, threading and boring of oversized workpieces with a maximum weight of 2 tonnes. All these machining processes are performed fully automatically, thanks to the use of an automatic pallet exchange system. This system allows workpieces to be loaded and unloaded simultaneously during machining, thus increasing production efficiency and significantly reducing machine downtime. The pallets are transported by a stable cast iron saddle on bed’s hardened and ground guideways. Movement of the X,Y,Z axes is performed on hardened and ground slideways. These ensure that the geometry of the axes remains constant, even when moving to end of their travels. All moving components, in turn, have Turcite B coated bearings, which ensure low friction and high vi ...
used
OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...
used
travel -x axis: 760 mmtravel -y axis: 640 mmtravel -z axis: 760 mmsurface area: 500 x 500 mmcontrol: FANUC Oi-MD numbers of positions in the tool changer: 60 Milling machining centers - horizontal | QUASER - HX504 AEThe machine is in a well-maintained condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: HX504AE | HX 504 AE | HX-504 AE | HX 504AEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
380 V 16 A Speeds 100 - 1250 rpm Length 1 m Width 0.8 m Height 1.40 m Table converted to pneumatic control.
used
380 V 16 A 63- 800 rpm Length 1 m Width 0.8 m Height 1.40 m Color: Green Machine is overhauled.
used
Horizontal milling machine Steinel SH1 Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
used
Horizontal milling machine Steinel Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
used
x-travel: / mmy-travel: / mmz-travel: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.