used Hydraulic Circular Cold Saws for sale

 Age: 2013  Web width 340 mm  Max. Print Width: 330 mm  Corona Treatment Vetaphone  Unwinder 700mm  Rewinder 600mm  Servo-drive  Flexo Printing Unit  Coldfoil/Lamination  UV Dryer GEW E2C  Semi- and full rotary Die Cutting  Slitting Unit

ABG DIGICON II - CONVERTING Year of Manufacture: 2009 ________________________________________ Product Description: Year of Manufacture: 2009 Location: Labelpresshop/Germany Availability: Immediately available Condition: Very good working condition, regularly maintained ________________________________________ Machine Specifications and Equipment: • Web width: 330 mm • Control panel: Movable central control panel • Unwinder: With web edge guide system • Corona Treatment System for surface preparation • Round-to-round Heat Sealing Unit • Flexo Printing Unit: Full / semi-rotary • Cold Foil & Lamination Unit • Drying System: UV and hot air drying • Central Dancer Roller for web tension control • Die-Cutting Unit: Full / semi-rotary with heating oven and Beck Gapmaster • Waste Removal System: De-weeding with rewinder • Slitting Knives: 2 bottom  ...

Width 330 Full Rotative and Semi Rotative Flexo varnish and lamination coldfoil UV dryer 2 x unwinders, 2 x rewinders

Qty. 1 Second-hand 4-Hi cold rolling mill – dismantled & in storage Mfc.: Achenbach Type: 4-Hi, non reversing Built: 1979 Material: Al Alloy 1100, 3003, 3004, 5005, 5052 (Al99, AlMn, AlMgMn, AlMg1, AlMg3) Strip width: 800 – 1650 mm Thickness Entry: 1.7 mm Exit: 0.040 mm Coil ID 660 mm OD 1550 mm Weight: 6600 kg Back-up rolls Dia. 980-1040 x 1850 mm Work rolls Dia. 330-360 x 1850 mm Rolling speed: 0-240/600 m/min. 0-600/1500 m/min Feeding speed: 30 – 40 m/min Tap speed: 10 – 40 m/min. Roll force: 100 - 1000 Mp (1000 – 10 000 N) De-coiler axial adjustment: +/- 50 mm Back-up roller bearings: 4 SKF - Cylindrical roller bearings 313 705 B/VGS 4 Deep groove ball bearing 60/630 N1 MBS/C3 Work roll bearings 12 SKF Cylindrical roller bearings NNU 4940 B/P53 4 SKF Angular contact ball bearings 305 393

Qty.1 Second-hand cold rolling mill Mfc.: Achenbach, INNSE/MINO Type: 4-Hi Revamped: 2015 Strip width: 1500 mm Thickness Entry: 6.0 mm Exit: 0.3 mm Run-out table width: 1600 mm Rolling speed: 600 m/min. Motors Mfc.: Simemotori Fire Protection System Lubrication system

MANUFACTURER: Alfa Laval ( Tetra Pak ) Cold Milk Separator TYPE: CMRPX 714 HGV CAPACITY: 10.000 Liter per hour for cold milk skimming 20.000 Liter per hour for hot milk skimming and standardization MACHINE COMES WITH: TETRA ALFAST CREAM STANDARDIZATION UNIT ! APPLICATION: Cream separation from COLD MILK & WARM MILK Cream separation from WHEY Standardization

Bottling Line ALFATEK – 3.600 bph Year: 1996 – 2009 Speed: 3.600 bph Direction: Clockwsie Used rinser KOMPASS Year: 2009 Speed: 5.000 bph Direction: Clockwsie 20 clamps Fixed nozzle Single treatment Filling monoblock ALFATEK 24.4 Year: 2003 Speed: 4.000 bph Direction: Clockwsie Filler 24 valves Corker 4 heads – Natural straight cork Labeller NEWTEC 9T Year: 2015 Speed: 6.000 bph Direction: Clockwise Nr.2 cold glue stations Nr.1 adhesive station Box forming machine APE Year: 1996 Speed: 900 C/H Gluer NORDSON Case packer APE Year: 1996 Speed: 3.600 bph Box closing machine SIAT Year: 1996

CIRCULAR SAW model ALTENDORF F45 with 2 axes by CNC second hand machine in excellent working condiiton CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control electric movements of scoring unit , from the control panel technical data : anodized aluminum carriage mm. 3000 max.diam. blade ( with scoring blade ) mm.350 max.diam. blade ( without scoring blade ) mm. 450 blade rotation speed g/min.3000/4000/5000/6000 with scoring unit : Yes blade group inclinable at 45° cutting width on the parallel guide mm.1350 main saw blade . motor power 7.5 Hp scoring unit motor power Hp 1 machine equipment: aluminum telescopic rod n.01 DIGIT L digital disp ...

CIRCULAR SAW Mod ALTENDORF F45 machine suitable for cutting plastics and solid wood CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3400 max. blade mm.500 blade group inclinable at 45° max. cutting height with 90° blade = mm.175 max. cutting height with blade at 45° = mm.123 saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended bridge protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1100 Volt. 380/50 Year 2003

ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

This flash pasteurizer was manufactured by APV in year 2005 for eliminating harmful microorganisms from beer before packaging. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a heat exchanger, holding / pasteurization tube, control cabinet, pumps, pipes, valves and instruments all built on stainless steel frame. Technical Characteri ...

Used PRALINES production line: Producer: Aasted-Microverk APS. Model: 275 MINI for a cold stamp Year: 1996 (commissioning year 1997) The line used in 1997-2014 (2015) Description: forms: approx. 3500 items (molds are in different technical condition) Types of Forms: · Molds - number of places for pralines - 28: o rectangular forms 28 places for pralines (14 pralines, violin shape, 14 pralines each) trumpet shape) o rectangular forms 28 places for pralines (14 pralines, harp shape, 14 pralines each) shape piano) o Molds in the shape of a trunk 28 places for pralines o Small ball shaped molds 28 places for pralines o Big ball forms 28 places for pralines o Square forms 28 places for pralines There are approx. 2500 items of this kind. · Molds - number of places for pralines - 56: o Forms bears, cats 56 places for pralines (28 bears, cats each) o Forms Christmas tree,  ...

bottling line AVE – wine • Speed: 3.200 bph • Direction: Clockwise • Depalletizer OMA – 2002 o Model: DEPALBLOCK • Filling monoblock AVE 16.16.4 - 2000 o Rinser 16 clamps o Filler 16 valves o Corker 4 heads – natural straight cork o Capper BERTOLASO STELVIN - 1985 • Dryer EUROPOOL - 2005 • Capsuling machine ROBINO&GALANDRINO – 2000 o Model: FENIX 2 • Labeller 8 teste KOSME – 2005 o 3 cold glue stations o 2 adhesive stations • Box forming machine APE MODULO F – 2002 • Case packer APE INCA 1200 – 1997 • Box closing machine SIAT XL 33 P C

bottling line AVE - 2005 speed: 2.500 bph for sparkling wine 3.000 bph for still wine. Depalletizer GP ENGINEERING mod. COMPACT 52 Filling monoblock isobaric AVE 24.24.6: Rinser 24 clamps single treatment - fixed nozzle Filler 24 valves with pre-evacuation and self-leveling Corker 6 head natural straight cork and mushroom cork. Caps orientator AVE Bottle washer/dryer CAMES mod. W DT 3/8 Capsuling machine ROBINO & GALANDRINO mod. FENIX 2 suitable for pvc and polylaminate capsules Labeller AVE adhesive and cold glue mod. 12T 4S 4E suitable to apply: Front label and back label (adhesive and cold glue). Packing monoblock GP ENGINEERING mod. ISOLA 700: Box forming machine - american box Case packer single head with adjustable head Hives inserter AVE Box closing machine above and below hot glue AVE Palletizer GP ENGINEERING mod. PABR 50 Wrap pallets semiautomatic AVE Le ...

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished scotch brite type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressure ...

labeller AXTRA | 20T CO CE Year: 2010. Speed: 12.000 bph. Direction: Clockwise. Nr. 3 adhesive stations. Nr.1 cold glue station for i” and L” seal. Optical centering. Electronic cams. Safety protections.

Labeller AXTRA 8T – Optical Year: 2010. Speed: 8.000 bph. Direction: Clockwise. 8 heads. Optical centering (fiber) Electronic cam. Nr.3 adhesive stations. Nr.3 cold glue stations. Safety protections.

Baader 1741 fish heading machine Condition: overhauled Designed for heading of cod, pangasius, catfish, tilapia. BAADER 1741 separates the head from the body by two circular knives located at an angle to each other. The head is hereby kept back by a flap thus saving the valuable meat from the neck part of head. At a comfortable working height one operator feeds the fish with the head up into the machine. Supported by the vertical fins on two fish guides, the fish is transported through the machine by two conveyors circulating at a constant speed and equipped with drivers. The two knives than separates the head from the body close behind the collar fins. The deheaded fish falls on a an ascending conveyor belt and is transported to the next processing station whereas the heads leave the machine on a chute at the side. Fish size range: 30 – 70 cm Capacity: up to 40 fish per m ...

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI I2F machine for chairs composed by 3 working units : - circular saw diam. mm.350 motor power hp 3 - boring unit boring head with 5/7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 - vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage machine composed by 3 working units : 1) circular saw for cutting to length of pieces 2) boring unit equipped with multi bit drilling head 3) vertical spindle for moulding the machine may be used for a variery of job requirements , including the end cutting off , moulding curved surfaces and boring end cutting , or end cutting off amd moulding for finger jointing , or end cutting , etc.

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI IF Special machine for chairs automatically cuts and bores all type of parts of chairs and furniture components . composed by : - circular saw diam.mm.350 motor power hp 3 - boring unit ( boring head with 5/7 mandrins ) motor power Hp 3 max. working stroke of boring unit mm. 130 net weight kgs.400 Volt. 380/50

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max.  ...

BARMAG EXTRUSION SPINNING MACHINE WITH 12 POSITION / 72 THREADLINES • FOR PET POY MICROFILAMENT • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

BARMAG POY EXTRUSION SPINNING MACHINE WITH 12 POSITION / 72 THREADLINES FOR POLYESTER POY MICROFILAMENT • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Drycooler Basetec Type: GFW 090.1/3-S(S)-F4/03/6P Cooling capacity: 64 Kw Air flow: 34 200 m3/h Number of fans: 3 x 900 mm Dimensions: 3700 x 1200 x 1800 mm Volume: 85.7 L Weight: 777 kg Pieces in stock: 1 Condition: Used Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Used compressor made by ABC 4HA-4-LT, new 1997, capacity 7.8 m3 / min. Dimensions: 2100x4000x2500 mm. The compressor consists of: cooler AIRSEC AW-750010/10, new 1997, capacity 7.5 m3/h, cold dryer AIRSEC FD10B/E new1997, capacity 300 m3/h

Bottling line isobaric PET/glass Year: 2000 - 2013 Speed: PET: 6.000 bph Vetro: 8.000 bph Blower SIAPI - 2000 Preform tilter – 2012 ZECCHETTI air conveyors – 2000 Depalletizer SYMPAK - 2003 Filling monoblock BC 42.50.10 – 2000 Ozonator – 2000 Caps elevator – 2000 Deareator and Saturator BC– 2000 Labeller KOSME cold glue and hot melt for glass – 2000 Labeller P.E. hot melt for PET - 2003 Bottle inspector (cap level label) – 2000 Inkjet VIDEOJET – 2013 Devider (1 to 2 rows) – 2003 Shrink wrapper DIMAC – 2000 Handler TWINPACK – 2000 Wraparound DIMAC – 2003 Box conveyors - 2003 Palletizer KEBER – 2000 Pallet wrapper – 2000

Bottling line isobaric PET/glass • Year: 2000 - 2013 • Speed: o PET: 6.000 bph o Glass: 8.000 bph • Blower SIAPI - 2000 • Preform tilter – 2012 • ZECCHETTI air conveyors – 2000 • Depalletizer SYMPAK - 2003 • Filling monoblock BC 42.50.10 – 2000 • Ozonator – 2000 • Caps elevator – 2000 • Deareator and Saturator BC– 2000 • Labeller KOSME cold glue and hot melt for glass – 2000 • Labeller P.E. hot melt for PET - 2003 • Bottle inspector (cap level label) – 2000 • Inkjet VIDEOJET – 2013 • Devider (1 to 2 rows) – 2003 • Shrink wrapper DIMAC – 2000 • Handler TWINPACK – 2000 • Wraparound DIMAC – 2003 • Box conveyors - 2003 • Palletizer KEBER – 2000 • Pallet wrapper – 2000

(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019) Manufacturer: BECHE (Schloemann) Type: DGH 40 YOM: Revamped 2019 Machine Number: 2412-HW Including 12 Ton Wellman manipulator Impact work: 40,000 mkg Total bar lift.:1.250 mm Maximum number of strokes:80 Pro Minute Average score: 6 Pro Minute Air consumption per ten blow Blow in . m in required air at the strongest hit: 6.8 Cold Air Compressor performance in m3/min: 41 Cold Air Compressor performance in m3/min:27 Hot air (160° C) Power requirement of the compressor in hp:260 Cold Air Power requirement of the compressor in hp:180 Cold Air Air tank capacity:30 m3 Steam consumption per hit with the strongest hit:3.5 kg Steam consumption per minute (saturated steam):21 kg Clear width between the guides: 1200 mm Maximum singing sounds: 2700 mm Lowest overall height of the dies without dovetail: 575 mm O ...

Machine Details Stock-No. 1105-04064 Type of machine Band Saw - Automatic - Horizontal Make BEHRINGER Type SLB 240 A Year of manufacture 2016 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free loaded truck, ex stock HAGUENAU Technical details cutting diameter 260 mm saw band length 4100 x 32 x 1.1 mm cutting width 260 mm feed length 600 mm range L-W-H 2.5 x 2.2 x 1.6 m Weight of the machine approx. 2.2 t Additional information automatic band saw Chip Conveyor hydraulic pump good working condition

Technical dataCirculary table diameter: 400 mmOverall dimensions machine:Length: 700 mmWidth: 600 mmHeight: 1800 mm

available Berstotff Rollerhead - Extruder Cold Feed Extruder - 200mm x 218D 2 roll calendars 400mm x 1200mm see attached description!

Bottling line – Isobaric Speed: 6.000 bph Rinser AVE 28 clamps Single treatment Fixed nozzle Filler Bertolaso 32 valves De-gassing Self-leveling Pre-evacuation Corker BERTOLASO 4 heads Natural straight cork Capper BERTOLASO 3 heads Screw cap Capsuling machine NORTAN 4 heads for pvc capsules Plateau capsules distributions Ruller BERTOLASO – 8 heads Labeller KOSME – cold glue Box forming machine APE Case packer APE Box closing machine APE Palletizer APE

Bettcher Power cleaver / slicer Model: 39 Stainless frame, six product chutes on turntable, with stainless circular blade for slicing, ideal for slicing salami / pepperoni etc

Manufacturer: Bielomatik Model: 368 year: 1994 8 stations Paper size (cm): 100 to 400 Multiflex, Crimping Snap-out delivery 2 5/6 to 121/2 Indentation cylinder 24 x 100mm Cold glue with 7 nozzles intermittently programmable 2 Numbering possible on a form Price: on request

Size 76 × 102 cm – 25 × 35 cm min Speed : 2 m/min Paper 115 g/m2 min cold glue MABEG automatic sheet feeder Heater unit Water based laminating 2 cylinders : 1 press and 1 heat BAT-76 sheet separator Jogger table delivery

Bitzer compressor unit Type: 2 x 4PES-12-40P, 4PCS-10.2Y-40P, 4TES-9Y-40P, 4TCS-8.2Y-40P Volume: 3 x 48.5 m3/h, 2 x 41.3 m3/h Cooling capacity: 155 kW at -5°C/40°C, 126 kW at -10°C/40°C, 61 kW at -25°C/40°C Refrigerant: R404A Dimensions: 2600 x 800 x 1850 mm Reference number: Z18 Pieces in stock: 1 Condition: Used Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart,Helpman

Refrigerant compressors system Bitzer Type: 4CES-6Y-40S (x3) Volume: 32.5 m3/h (3x) Cooling capacity for R404A: 63 kW at -5°C/40°C, 52 kW at -10°C/40°C, 27 kW at -25°C/40°C Pieces in stock: 12 Reference number: Z 54 Condition: Used Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Several compressors/compound plants/condensers available. All machines fully functional. Bitzer/ Frascold/ Bock/ Dorin Contact: Imad Hassan Phone: +49 176 239 222 17 E-mail: infohakima-gm

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4U-15Y-40P -Kaeltepower: 70 kW at -10ºC/40ºC -Volume: 3 x 73.7 m3/h -Quantity in stock: 1 piece -Kealtemittel: R404A -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart,Helpman

Used Bitzer 4HTC-15K-40P (x2) semi-hermetic reciprocating compressor rack on CO2 (R744). Complete with an OCS COLD RLV 110L 0DS28 liquid receiver with a volume of 110 liter, oil separator, oil reservoir, Danfoss FC-103P15KT4P55 frequency converter, pressure and safety switches/gauges, liquid line filter drier and a control cabinet. The compressors have a total displacement of 24 m³/h at 50 Hz and 29 m³/h at 60 Hz. Specifications: Brand: Bitzer Type: 4HTC-15K-40P (x2) Refrigerant: CO2 Refrigerant type: R744 kW at 0ºC/+40ºC: 59,2 kW at -5ºC/+40ºC: 49,2 kW at -10ºC/+40ºC: 40,3 m3 / h: 50 Hz - 24 m³/h / 60 Hz - 29 m³/h Remarks: Y.o.b. 2017 Sizes: 2160x1000x2100 mm (LxWxH)

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4JE-13Y-40P -Kaeltepower: 60 kW at -10ºC/40ºC, 26 kW at -25ºC/40ºC -Volume: 3 x 63.5 m3/h -Quantity in stock: 1 piece -Kealtemittel: R134 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart,Helpman

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4NES-14Y-40P -KaelteLeistung: 94.5 kW at -10ºC/40ºC, 47 kW at -25ºC/40ºC, 19kW at -40ºC/40ºC -Volume: 3 x 56.3 m3/h -Quantity in stock: 1 piece -Kealtemittel: R404A -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart,Helpman

Refrigeration compressors system Bitzer Type: 4PCS-10.2Y-40P (x3) Volume: 48.5 m3/h (x3) Cooling capacity for R404A: 96 kW at -5°C/40°C, 80 kW at -10°C/40°C, 40 kW at -25°C/40°C Dimensions: 2100 x 1000 x 1950 mm Condition: Used Condenser Guntner Type: S-GVH 100.2C/2-S(S) Cooling capacity: 134/107 kW Air flow: 38 000/ 27 500 m3/h Number of fans: 2 x 1000 mm Dimensions: 4200 x 1600 x 1650 mm Volume: 52.2 + 5.8 L Condition: Used Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Compressor Bitzer Type: 60-70.2 Volume: 219.1 m3/h Cooling capacity: 143 kW at -5ºC/40ºC, 118 kW at -10ºC/40ºC, 77kW at -20ºC/40ºC R404A Quantity in stock: 1 Reference Number: S75 Condition : Used in good condition Price on request, We have many other refrigeration machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart,Helpman

Composite equipment Bitzer with original condenser Freezer / normal cooling -4x compressor Bitzer 6F-40.2Y -Cooling capacity: 330 kW at -10oC/40oC, 180 kW at -25oC/40oC, 100 kW at -35oC/40oC -Volume: 4 x 151.6 m3 -Number of pieces in stock: 2 pieces -Refrigerant: Freon -With original condenser -In very good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman