We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 109-898)
used
cycle time: sectotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 665 mmy-travel: 465 mmz-travel: 350 mmweight of the machine ca.: 0,65 tdimensions of the machine ca.: 1,11,12,2 mNo. 02983D measuring machine DEA OMICRON A 001Working area: 665 x 465 x 350TROLL - microprocessor systemL x W x H 1100 x 1100 x 2200 mmWeight approx. 620 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
BJ Band Saw Kasto SBL 280 U 1998 Conventional lathe E3N01 Lathe Hurco TM8i Surface Grinding Machine FSG-1640AD Wagner 1997 Silent E Forklift R20-15 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX30t 3-axis milling machine Hurco VMX64 Wire EDM Machine Mitsubishi FA20 Zeiss Contura G2 CNC Coordinate Measuring Machine 2007
used
Technical data: Manufacturer: Fischer Type: XMDVM-T7.1-W Year of construction: approx. 2004 Measuring table travels: X 175 mm, Y 175 mm Software: WINFTM Version: 6.31 L-PDM 2014 Condition Condition: Used Functional: Tested and fully functional The granite slab shown in the picture is not an accessory and is not for sale.
used
Technical data: Manufacturer: Garant Type: HC1 Year of Make: 1998 Measuring range: 600 mm Measuring force: 1 N +/- 0.2 N Resolution: up to 0.0002 mm Dimensions and weight Dimensions: 24 cm x 25 cm x 100 cm Weight: approx. 30 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Control and evaluation device HD1 (membrane keypad with pressure point)
used
For sale is a professional Hexagon Absolute Arm 8530 with AS1 laser scanner. The system was used professionally and is in very good technical and visual condition. Areas of application • Series accompaniment • Incoming goods inspection • Reverse engineering • Tool correction • Initial sampling • Area comparison • Quality inspection Scope of delivery: • Measuring arm 8530 • AS1 Scanner • Control Pack 3 (CP3) • Magnetic mounting plate • Transport and accessory case • Pushbutton set / reference accessories • Power supply, cables and other accessories
used
The machine is in good technical condition, testing is possible after prior agreement. The machine can also be sold with a stock of measuring probes, clamping plates, and connecting elements.
used
HEXAGON ROMER ABSOLUTE ARM RA-7525-3 coordinate measuring arm was built in 2014 in France by Hexagon Metrology. The device is used for the precise 3D measurement of complex parts, which are usually inspected on complex metrology devices. The process, thanks to the use of absolute encoders, is performed immediately. Simply switch on the arm and start measuring. What’s more, the universal mount allows the change of measuring probes at any time, without the need to recalibrate. The Zero G counterbalance minimises torque in the base of the device, increasing freedom in mounting options, i.e. lightweight tripods, magnetic and vacuum bases. This solution, combined with immediate acoustic and haptic feedback to the operator, allows the machine to be used in even the most demanding industrial environments. When the HEXAGON portable measuring arm is not in use, it can be locked safely in the ...
used
Measuring arm from Hexagon, demonstration device, in-house since August 2024 but not in use
used
dimension of workpiece: - mmvoltage: - Vaccessories and equipment:: ASUS All-in-One PC total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mhttp://www.ibendorf.de/ecmc.htmlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Image sensor 1", 6.6 megapixels, CMOS Dual telecentric lens Z-axis travel 30 mm Z-stage stage maximum load 3 kg
used
Measuring System IM-6600 IM-6120 Transducer CMOS sensor: 6.6 MP monochrome Display 10.4" LCD color monitor Field of view: φ100 x 200 mm Smallest display unit: 0.1 μm Telecentric transmitted light illumination (4-segment ring) Measurement Accuracy: Wide-field measurement mode: ±5 μm High-precision measurement mode: ±2 μm Large field of view measurement mode: ±7 +0.02L μm Fixed Position Measurement Mode: ±4 +0.02L μm Table: X-axis: 100 mm Z-axis: 30 mm Load capacity: 1 kg
used
For sale is a Keyence IM-8030 digital measurement projector with IM-8000 control unit. Year of construction is 2023. Prior sale and errors excepted.
used
3D Measurement Macroscope Controller VR 3000K Measuring head VR 3100 Measuring range 24 x 18 x 10 mm Measuring diagonal 30 mm Magnification: 12x – 160x Resolution 0.1 μm Automatic edge detection
used
Measuring range: X24, Y 18, Z 10 mmweight of the machine ca.: 35 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical data: Manufacturer: Mahr Type: DIGIMAR CX 2 Year of construction| 2005 Measuring range: 600 mm Measuring force: 1 N +/- 0.3 N Probing speed: 10 mm/s Resolution: up to 0.001 mm Dimensions and weight Dimensions L/W/H: 240 mm x 270 mm x 1,000 mm Weight: 16 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Operating and evaluation device DX 2 (membrane keypad with pressure points)
used
Technical data: Manufacturer: Mahr Feeder: MarSurf GD 26 Year of manufacture: 2018 Control unit: MarSurf MI 500 Condition Condition: Used Functional: Tested and fully functional
used
x-travel: --- mmy-travel: --- mmz-travel: --- mmtotal power requirement: --- kWweight of the machine ca.: --- tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
used
PREWI measuring table was manufactured in Germany by PREWI Mess- und Steuerungstechnik GmbH. The device is designed for the precise dimensional inspection of larger workpieces in both industrial and laboratory conditions. The combination of precision guideways with a measuring system operating in three axes X, Y and Z ensures high repeatability of measurements. This solution allows for a measurement accuracy of ± 0,10 mm in the X and Y axes and ± 0,05 mm in the Z axis. The HEIDENHAIN ND 5023 digital readout, in turn, enable quick reading of values during measurements, facilitating the operation of the device. The PREWI measuring table is ideal for use in quality control departments, tool rooms and manufacturing plants, where it is used to verify dimensions and assess the conformity of workpieces with technological requirements. Technical specifications of the PREWI measuring table ...
used
The SIP Sirius 7 is a high-precision fixed-bridge Coordinate Measuring Machine (CMM) designed for dimensional inspection and quality control in manufacturing environments. Sirius 7 is known for its robust construction and hydrostatic bearing system, ensuring smooth and accurate measurements. Key Specifications • Measuring Range: 1,000 mm × 1,000 mm × 800 mm (X × Y × Z) • Accuracy: ±4 µm (micrometers) • Repeatability: ±2 µm • Guide System: Hydrostatic bearings • Temperature Compensation: Yes • Control Type: Manual (standard), with options for digital or CNC control systems • Probe System: Typically equipped with Renishaw or similar touch-trigger probes • Software Compatibility: Compatible with various metrology software platforms, including PC-DMIS and others
used
working area: 50 - 75 mmworking area: 75 - 100 mmworking area: 200 - 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Steinheil KONTUR 408-2/D optoelectronic contour and shaft measuring system High-precision optoelectronic contour and shaft measuring system Steinheil KONTUR 408-2/D with high-quality Jenoptik optics The system is used for contactless, high-precision and fast measurement of rotationally symmetrical components (e.g. shafts, camshafts, turned parts) The device scans the measuring object without contact according to the shadow image principle. Rotational measurements are recorded with up to 1440 measuring points on the circumference per measuring point. The evaluation and quality control is carried out directly via an integrated SPC software (Statistical Process Control) based on Windows NT with clear tolerance bars and diagrams The system is housed in a closed aluminium profile housing with a transparent protective structure and is protected by professional safety light curtains ...
used
used
Technical data: Manufacturer: Tesa Brown&Sharpe Type: Derby Etalon 454 Year of Make: 1998 Measuring range X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transducer: Renishaw TP-ES Dimensions and weight Weight: approx. 250 kg Condition Condition: Used Functional: Tested and fully functional
used
Digital Height Gauge Travel: 600 mm Column diameter: Ø 45 mm Granit base dimensions (L x W x H): 200 x 140 x 60 mm In working condition
used
amount: 1 STKThe mechanical zero setter is the standard version of our mechanical zero setters. It has a height of 50 mm and is suitable for precisely determining the position of workpiece surfaces or tool lengths in the Z direction on milling machines or lathes.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
amount: 1 STKweight: 5 kgrange L-W-H: 380 x 340 x 220 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Serial Number: 075388 Year of Make: 2007 X 800mm Y 1000mm Z 700mm Measuring head SP80
used
3 D Coordinate Measuring Machine Manufacturer: Wenzel Type RS 1012 Construction year 1997 last service by Wenzel was in Oct 2025 The machine is in a used very good condition and is 100% OK. Technical Core Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year: RS 1012 / 1997 Measuring volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing system: Renishaw PHC10-3 PLUS (interface/control for motorized rotary/swivel head PH10) Design: Horizontal arm measuring device (column measuring machine) with integrated base plate Measurement Accuracy (MPE): 15.0 mu+ (L / 45.0 mm Total Maximum Length measurement error in the measuring range is approx. 50.0 micrometers) Sensor system (standard configuration):
used
3D coordinate measuring machine Manufacturer: Wenzel Type Smarth CMM Granite slab L x W 1640 x 700 Year of manufacture 2005 incl. PC s, user manual, software Machine is in a used good 100% working condition.
used
Inv. Num. : 9295 Type: XO 87 Producer: Wenzel Created: 2007 Parameters: Axis X: 1500 mm Axis Y: 800 mm Axis Z: 700 mm
used
Coordinate measuring machine for sale: The Video Check is built in 2004, has Windows XP with WinWerth V 7.32. The measuring range is 1000x650x600 A Renishaw PH10M is installed The device has 2 Z quills (1x zoom/1x button or laser) To be included in the package: - Bracket changer - Laserline - Pushbutton/probe - Screw compressor - Air pressure vessels - Documentation The device is in storage.
used
x-travel: 800 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 2 x 2 x 3,5 mWerth Video Check IP 800 3D CNC measuring machine, built in 2001, retrofitted in 2016 No longer in operation for several years due to discontinuation of the parts.Software version: WinWerth 8.34The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Zeiss Pro T advance 16/21 measuring machine
used
used
Measuring machine Zeiss Prismo 7 BJ 1997 generallueb. 2024
used
Measuring range width/ length/ height 1600/ 1800/ 1000 mm Dimensions Width/ Length/ Height 2450/ 2940/ 3800 mm max. workpiece weight 3500 kg Measuring machine weight 8500 kg Creep speed 0 - 5 mm/s Setup operation 0 - 70 mm/s Series measurement operation Axis max. 300 mm/s Vector max. 425 mm/s Software version Calybso 2023/ Service Pack 2 --- version 7.6.08 Various probes Transducer
used
used
Zeiss UPMC 850 Carat measuring machine for sale • Travels: X = 750mm; Y = 850mm; Z = 600mm • Portal design • Pushbutton magazine with 8 slots • Measuring ball • Probe set • HP working station with monitor
used
Zeiss Vista BJ 2000 measuring machine Incl. Erowa UPC pallet/lining on the Vista
used
measuring range X-axis: --- mmmeasuring range Y-axis: --- mmTable dimensions: --- mmtool diameter: --- mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.