used Moulders for sale

Code: 0441 Brand: CASADEI Model: SYNCRO Four side straightening planer with 4 spindles for wood, window frames, furniture, garden furniture, sawmill and various Technical data: One-piece steel base Min/max working width mm 20/180 Min/max working height mm 6/105 Infeed table length mm 2000 Infeed table and fence adjustment mm 10 Spindles diameter mm 35 Feeding speed 6/12 mt/min Rebating cutterhead diameter mm 120 Powered feeding siystem raise Composition: 1° Spindle surface planer - Motor Hp 10 - Size mm 190 x 100 Z3 2° Spindle right spindle moulder - Motor Hp 7,5 - Size mm 120 x 100 Z3 3° Spindle left spindle moulder - Size mm 120 x 100 Z3 4° Spindle thickness planer - Motor Hp 10 - Size mm 190 x 100 Z3 Diameter of suction ports mm 120 N° 4 Planer heads Overall dimensions mm 3000 x 1160 x 1555 h Weight kg 900

Code: 0325 Brand: MAGIC - ITALY Model: FORMA 18 Programmed 5-shaft automatic moulding machine for wooden profiles, frames, furniture, window frames, and various materials Technical data: Working width mm 180 Working height mm 120 Min workpiece length mm 370 Input table length mm 2000 Composition: 1° Surface planer spindle - Motor Hp 5,5 2° Right spindle moulder spindle - Motor Hp 5,5 3° Left spindle moulder spindle - Motor Hp 5,5 4° Thickness planer spindle - Motor Hp 5,5 5° Universal spindle 360° Shaft diameter mm 40 Diameter cutterheads mm 125 Max tool diameter on 2°/3°/4° spindle mm 160 Feed speed variator mt/min 4/24 Electronic 2-axis programmer with 99 memories Pneumatic pressure on drive system Tools mounted on 4 shafts Protection cabin N° 5 suction ports diameter 120 Compressed air 7 bar Overall dimensions mm 3800 x 1400 x 1500 h Weight ...

MARTIN T90 Four-sided crane with NC control and 6 spindles and swing axle (Left3) Specifications: Brand: MARTIN Type: T90 with 6 spindles incl. pendulum axle (left 3) Year of Make: 2023 A1 - Refurbished and Repainted M-No.: V239722 Operating hours: 5,962 hours Feed table: 2000 mm Table height adjustment: Max. Spahn name 10 mm Stop bar: Manual adjustment 10 mm Planing width: 22 - 260 mm (profiling width top 4 is 260 mm, spindle 5 & 6 is tool dependent) Planing thickness: 5 - 160 mm (profiling width right/left is 160 mm, spindle 5 & 6 is tool dependent) Planing shaft: 1st spindle, with max. 10 mm decrease, 260 mm, flight circle min. ø100 mm - max ø125 mm Calibration planing and contour shafts: 2 & 3 spindles (vertical spindles) max. 10 mm, clamping length 160 mm, flight circle min. ø100 mm - max ø125 mm Thickness shaft/upper shaft: 4th top spindle  ...

Code: 0310 Brand: PINHEIRO MAQUINAS - PORTUGAL Model: PMA2 - MS - 510 2- Shaft Planing Moulding machine with moving head and multi-blade shaft for sawmill, wooden beams, planks, wooden roofs - CE Standard Technical data: Sturdy construction Working width mm 0-510 Working height mm 12-260 Automatic lifting Max cutting width mm 490 Max cutting height mm 120 Max stock removal lower shaft mm 12 Max stock removal upper shaft mm 15 Minimum workpiece length mm 415 intermittent pieces Minimum workpiece length mm 180 continuous Variable feed speed m/min 7/40 with display Horizontal shaft speed rpm 5300 Multi-blade shaft speed rpm 2300 Multi-blade shaft diameter mm 75 Saw blade diameter mm 200-400 Backstop safety devices Pneumatic pressure system on n° 8 upper drive rollers N° 3 lower drive rollers - Diameter mm 112 N° 4 tersa knives for each shaft Motor power Lo ...

Product name: Wadkin Year: Machine no.: 20240803 Price: € Description: Machine type GA 525 - 91190, in good condition, with noise suppression housing, with long inlet table, with through-going feeder in machine, working width 220 mm, with 6 tool spindles, the machine has the following tool spindles:, 1 lower, 1 right, 1 left, 2 upper, 1 lower, spindle diameter 40 mm., spindle length 220 mm., electricity consumption 82A

SPECIFICATIONS: Length of pre-planer machine inlet: 2200 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive Speed: 8000 rpm Voltage: 380 V Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) equipped with PowerLock HSK 3: Left (5.5 kW) equipped with PowerLock HSK and electronic control 4: Top (5.5 kW) with PowerLock HSK and electronic control 5: Bottom (5.5 kW) equipped with PowerLock HSK EQUIPMENT: Complete with milling

Weinig PROFIMAT 22N four-sided planer – after technical inspection - very good condition – DTR TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm lower head 4 kW right head left head 11 kW upper head 5.5 kW lower head 4 kW feed motor 2.2 kW feed speed 6-22 m/min four top steel pulling rollers one rubber upper pulling roller feed on cardan shafts pneumatic pressure electric height adjustment length of the initial top 2485 mm machine dimensions (length/width/height) 400 / 180 / 170 cm weight ~ 1800 kg

SPECIFICATIONS: Length of the entrance area of the planer: 1000 mm Working width: 260 mm Working height:120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive with inverter (2.2 kW) RPM: 6000 Installed power: 44 kW Spindle configuration: Bottom (11 kW) Right - Left (11 kW) Top(11 kW) Bottom (11 kW)

Working width 20 - 230 mm Working height 8 - 120 mm 5 working spindles DM 40 mm Long work table in the inlet ( approx. 2000 mm ) Working spindle bottom 4 kW / Left + Right 7.5 kW / Top 5.5 kW / Plaster bottom 7.5 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 - 24 m/min. Feed roller in front of dressing Control - Button operation Lubricant pump manual Mechanical Digital Displays Machine in CE version Year of manufacture 2001 Without editing tools Machine is FUNCTIONAL in GOOD - CONDITION

Weinig Quatromat 23 Moulder Specifications: Brand: Weinig Type: Q23P (profileerautomaat) Year of Make: 2003 M-No.: 99567 Feed table: 2000 mm Dressing table adjustment range: 10 mm Joining ruler adjustment range: 10 mm Planing width: 13 - 230 mm Planing thickness: 6 - 120 mm Thickness adjustment: Manuel with Siko counter Width adjustment: Manuel with Siko counter Head dimension: Min. 613mm, up to max. 120230mm Knife shafts: Bottom: ø125 mm Right & Left: ø125-200mm Top: ø125-200 mm Adjustment range dressing shaft: 5 mm Spindle adjustment range axial: 30 mm Min. Product Length: Short Workpiece Length Equipment Central Control: Relay Control Lubrication: Spindle arrangement: Bottom 4.0 KW Right + Left Spindle 5.5 kW Above 4.0 kW Speed: 6,000 rpm Feed: 8 m/min Stepless -1.5 kW Steel and rubber rollers. 1 feed roller electro-pneumatically cycled  ...

SPECIFICATIONS: Max. processing height mm: 150 Max. machining width mm: 230 Feed length mm: 2000 Spindle diameter: mm 40 Number of Spindles: 8 (7 + 1 Universal) Voltage: 380 volts Shaft drive Grooved table Spindle configuration: 1 BOTTOM 2 RIGHT 3 LINKS 4 RIGHT 5 TOP 6 Bottom 7 TOP 8 UNIVERSAL SPINDLE

Working width 230 mm Working height 160 mm 5 spindles U R L O U Motor 5.5 + 11+ 7.5+ 11 kw Feed rate 6-24 m/min Feed motor 4 kw