used Pressing containers for sale

Capacity of aluminum containers/oil: 500/1000 kg/h Dimensions of balls in sortie: 280x280x280 mm Total power: 14.7 kW Dimensions LPH: 3510x610x1530 mm Poods: 1780kg

Ultra fine grinding plant, consisting of: Fluid bed opposed jet mill Alpine 630 AFG (V total: 885 dm³, 10 bar shock pressure resistant, fold out classifier wheel), cyclone, 2 pcs. EX shutter valves, control cabinet and 4 pcs. product containers. Prior use: Toner production. Plant can be inspected in already dismantled state. Available for an additional charge: Dust filter Buehler PGFG 60/18 (39 m² filtering surface).

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

Semi-automatic baler, horizontal press 600 Plus provides a throughput of 1,5 tons per hours which makes it perfect for waste processing plants. The machine has a crushing force of 50 tons, the knife cutting off the excessive material in the charging chamber, the floor made of wear-resistant steel, a bale full indicator and a three-phase motor with the power of 15 kW. Optionally, the baler may be equipped with additional devices, e.g.: a tippler for 1000 L containers, cooperating conveyor belt, extra security devices, etc. Horizontal binding system makes it perfect for baling plastic PET bottles and aluminum cans. The whole process of baling, apart from binding, takes place in an automatic cycle. Technical parameters: dimensions/ size of the baler (height x width x depth) 2725 mm x 1435 mm x 5735 mm weight of the baler 6000 kg inlet size (height x width) 1370 mm x 720 mm bale dim ...

Semi-automatic baler, horizontal press 800 Plus provides a throughput of 2 tons per hours which makes it perfect for waste processing plants. The machine has a crushing force of 75 tons, the knife cutting off the excessive material in the charging chamber, the floor made of wear-resistant steel, a bale full indicator and a three-phase motor with the power of 15 kW. Optionally, the baler may be equipped with additional devices, e.g.: a tippler for 1000 L containers, co-operating conveyor belt, extra security devices, etc. Horizontal binding system makes it perfect for baling plastic PET bottles and aluminum cans. The whole process of baling, apart from binding, takes place in an automatic cycle. Technical parameters: dimensions/ size of the baler (height x width x depth) 2805 mm x 1750 mm x 7050 mm weight of the baler 7800 kg inlet size (height x width) 1900 mm x 970 mm bale dime ...

The machines and lines of the SFM series are designed for processing nested containers such disposable syringes. The dosing station is designed to process liquid products using rotary piston pumps. Depending on machine type and equipment, nests are supplied manually or fully automatically. Filling and closing are always fully automatic. The machines are also designed for vacuum-assisted dosing and insertion of plunger stoppers. This virtually eliminates entrapped air when filling disposable syringes with pharmaceutical product

TECHNICAL DATA Net weight: Kg 1330 Length: mm 2400 Width: mm 1550 Height: mm 1870 Voltage: Volt 230/400 Power: Kw 4 Frequency: Hz 50 PRODUCTION CHARACTERISTICS Production up to 48.000 vials/h Min. height vial: 20 mm Max. height vial: 140 mm Min. diameter vial: 7,5 mm Max. diameter vial: 36 mm Pressure: 2 bar The ESA series labelers apply self-adhesive labels from the reel to bottles and vials, cartridges and other unstable containers. All electrical, electronic and PLC components are integrated into the machines to save space. These continuous motion labellers have an extremely compact design. The label dispenser has a modular design and can be equipped with both intermittent motion and continuous motion printing systems. For added convenience and reliability, the functionality of the label dispenser can be enhanced by a number of additional controllers and wor ...

Clocked working machine for fully automatic sealing of round, flat and mould objects made of glass, plastic or metal with up to two different types of closure. Rubber plugs, drip inserts, screw and pilferproof and flange caps can be easily machined. Power: up to 4200 units/h.

For sale is a used parcel sorter. The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow Efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning Jcg2w8n • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerles ...

For crushing and compaction in open containers set up at various locations. The Mobil-Jumbo is a mobile Rollpacker that will efficiently tear, crush and compact almost any waste and recyclables. This is done with a heavy-duty and specially equipped roller compactor that crushes and compacts large waste materials to their minimum volume in a short period of time, achieving transport savings of 55-60%. Application: The Roll-Packer is particularly suitable for bulky waste and raw materials, i.e. wooden crates, pallets, large cardboard boxes, plant waste and so on. Technical parameters Dimensions approx. (excluding container) Machine width: approx. 2400 mm Machine height: up to max. 6900 mm Machine length: 4600 mm Roller width: approx. 1800 mm Roller diameter: approx. 1200 mm Cabin dimensions (LxWxH): 1250 x 880 x 2100 mm Additional information Wheelbase: approx. 2500 mm ...

Bohle HS400 lifting and turning device for containers, suitable for use with feeding tablet presses, capsule fillers etc. Up to 400kg lifting capacity

Bosch MLF 3002 intermittent motion filling and closing machine for injectable vials. Includes rotaty table for empty vials, 4 rotary piston filling heads (currently filling 100ml), stoppering inserter with bowl feeder, and closing system for ALU caps with bowl feeder. 90 degree reject to the rear of the machine, and product discharge in line with product flow. Suitable for containers up to 55mm diameter and up to 185mm high (double index), inserts and caps up to 36mm diameter. Output approximately 6,000 containers per hour.

Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters

The CEA ATM 18/18 was conceived to be introduced in the modern Pharmaceutical production line. It is placed after the filling and sterilization line, before the labeling and packaging line. The ampoules and/or vials are loaded manually on the loading plane of the ATM machine 18/18 by trays. The output of the rejected and approved ampoules and/or vials are respectively collected in separate trays. Formats: 1-2-5 ml Technical characteristics: • Dimension ampoules and bottles: Diameter Ø from 9 to 18 mm total height up to 100 mm • Mechanical speed: 18,000 vials/hour max. for 1 – 2 ml ampoule • Rotation speed: continuously adjustable from 500 to 3000 rpm • Power supply: 230V ± 10% 50/60 Hz 1Ph • The Client must guarantee a voltage fluctuation of no more than 10% • Absorbed power: 5 Kw • Loading/unloading plane height: 900 mm (adjustable ± 25 mm) • Dimens ...

Micro Brewery Brewiks 500L, 760 liters/brew, 5000 liters/month , year 2017 This is a complete 2-vessel brewery setup in 2017 and it has all essential components for brewing, fermenting, and packaging beer in glass bottles. It is an ideal choice for small to medium-scale operations. Main unit is Brewiks 500 liter 2-vessel system. It consists of two multifunction tunes, one acts as Mash tun / Boiler / Pasteurizer and the other as Lauter tun / Sparging / Whirlpool. These have been modified by Mithreum and an manhole has been added for easier spent grain removal. Mash tun/Boiler has maximum capacity of 760 liters it can make 2 brews in 8-11 hours, depending of type of beer. Monthly capacity with this equipment is around 5000 liters of beer, bottle neck being volume of fermenters. If needed this Brewiks 500 system can be upgraded/complemented with a Brewiks PLUS module (an additional boil  ...

professional equipment Content 9 liter Temperature adjustable up to 60 ° C GN containers and stainless steel lid easy cleaning Our temperature control is a fast, flexible and simple helper. Thanks to the dry heating no precautions should be taken. Plug in and go!; ready for operation

BTS-Bottle Crusher The BTS-Glass Crusher is ideal for crushing glass bottles in the beverage, glass industry and gastronomy. The volume of up to 100 beer bottles, wine and champagne bottles also other one way glass bottles can be crushed user-friendly up to 90% per minute. The glass bottle crusher impresses with its easy operation, throughput and large filling volume. - Volume reduction up to 80% - Reduces frequency of waste collection - Useable for beer, wine, champagne bottles and other one way glass bottles - Small foot print - Safe and easy to operate - Clean and safe work environment - CE-certified - Quality product Made in Europe Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x D): 1850 x 965 x 832 mm Transportation height: 1850 mm Machine weight: 315 kg Noise level: 65 decible Volume reduction up to: 80%

Waster Baler BTS-MF75 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 75 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2335 x 1040 x 720 mm Transportation height: 1800 mm Machine weigh ...

Complete chocolate production plant, plant components: - Beetz MK 2/500 chocolate mixer, refurbished 2023 with new electrics and new dust filter. Connecting belt to the 3-roll mill - Bauermeister DW 51 three-roll mill, refrubished 2023 with new electric and water station, connecting belt to the 5-roll refiner - Bühler SFG 1000 five-roll mill, refrubished in 2023 with new electric and water station, connecting belt to the conche - Frisse DÜC 1R Conche, refrubished 2023 with new electrics and new metal sieve separator - RF Block Melter/Fat Melter, new 2023 - RF bag feeding station (suction conveyor system), new 2023 The entire system is dismantled and stored in our warehouse in Germany. Documentation available. The facility is sold in existing condition, free loaded truck, packing and/or, container stowage are not included in the price

MJ UNI-MIS 037-000 Scope of delivery of the CT Scan Unit: Separation of the CT control room from the CT examination room by lead glass pane Patient access corridor Separate air conditioning in the CT room, control room and corridor Hygiene concept All 3 areas have their own ventilation (CT room, control room and corridor). The control room (seat of the MTRA for CT operation) is ventilated from the outside. The air in the control room has overpressure and escapes into the corridor. The CT room has its own ventilation from the outside, air escapes back to the outside, and the air flow is in balance. The corridor also has its own ventilation. Door widths 90 cm. A step to enter the container. Technical questions from the customer: Where is the exact exit and entry point for the network and electrical equipment at the container? Container door (short container side)  ...

Used Diesel Power Generator is for sale. Manufacturer: Caterpillar Operating hours: approx. 650 h Model No.: 3516 Machine Type: Used Power Generator Engine P0wer : About 1300 Kw Alternator SR4 : 1500 kva Speed: 1500 r.p.m Ph:3 Hz: 50 V: 400/230 Dimension : Ca The standard dimensions of the container are 40 feet Total weight : approx. 24.5 ton very good condition. If you have any further questions or information, please do not hesitate to contact us. No liability for typographical errors, all trademarks owned by the respective companies.

Caterpillar Power Generation generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility for stationary standby applications. Machine Model G3516 Manufacturer Caterpillar YEAR 2011 KVA 1825 KVA Condition Used Fuel Diesel TYPE Containerised Set FREQUENCY 50 HZ RPM 1500 RPM Location United KingdomWe are selling; 3 identical units CAT 3516 Diesel Containerised Package – Please see below the specification: 40-foot used containerised package purpose built-sound attenuated high-cube power module ISO containers per the enclosed drawing. CSE approved. 10.cn wall insulation, Sound louvers. bunded fuel day tank with electric automatic fuel topping and fuel cooler Diamond deck steel plate floor, fluid containment Floor drilled and bolt hole wells for Caterpillar sub-base frame 3516 Caterpillar (mounted) Side wall cover ...

2012 Caterpillar 3516C Gas Generator Containereed Package These containerised package XL has been bought for the UK project about couple of years ago but the project did not go ahead as planned. It has approx 25,000 hours and another unit with 26,000 hours on the clock. The containers also have CSC approved and testing certificate for shipping. The details are given below:- Technical specification of CAT 3516C Generating set Unit 1: Sr No: XL600164 Ar No: 3787743 Advertised Power 1622 KW Speed: 1500 RPM YOM: 05/2012 Unit 2: Sr no: XL600135 Arr no: 3787743 Advertised Power: 1622 KW Full load Speed: 1500 RPM YOM: 04/2012 Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to  ...

Used line for packing powdered products Chronos. Powdered products are packed in four-layer paper bags with a polyethylene insert of 25 kg net or BIG-BAG containers with a capacity of max 1000 kg. Packing in 25 kg bags takes place on an automatic Chronos packing machine. The packing machine automatically weighs, seals the polyethylene bag and seals the paper bag.

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

Code: 0365 Brand: COMAFER Model: METALPRESS 150 - CE Standard Hydraulic briquetting machine for compacting non-ferrous metal shavings, aluminum, grinding, bronze, lead, copper, cast iron and various materials - CE Standard The advantages are: 1) Volume reduction up to 10:1: optimizing transport and storage 2) Centrifuge elimination : compressing oils elimination and chemical waters 3) Dust Stabilization : by compacting it stabilizes volatile dust Technical data: Hourly output according to the specific weight of material kg 50-150 Max dimensions of briquettes diameter mm 55 - length mm 50 Motor Kw 7,5 Container dimensions - diameter mm 1000 - height mm 700 Power multiplier Cooling with disposable water Max working pressure 270 bar Overall dimensions mm 1250 x 1600 x 1450 h Weight kg 800

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

The Cretel container washer is specially designed for the cleaning of plastic or steel containers like DOLAV, Euro containers, car Bins etc. It can be considered as a reliable and proven system thanks to its proven concept with a high standard on hygienic design, water, chemicals and energy consumption Double spraying system for inside and outside cleaning Freely adjustable washing cycle Inclined position of the containers during washing process TWIN version available to double the capacity Rotative filters possible for extensive soiling (in option) Combination with washing bins is possible (in option

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

Dalmec PMC Barrel Drum lifter Serial: 935719 2009, Dalmec PRC, clamp jaws type, especially designed for picking and emptying drum. Barrels. Containers, one operator, max load 300Kg, with spare clamps and manual

Dalmec PRC Barrel Drum lifter Serial: 324899 2003, Dalmec PRC, clamp jaws type, especially designed for picking and emptying drum. Barrels. Containers, one operator, max load 250Kg

Dalmec PRC Barrel Drum lifter Serial: 9816115 Dalmec PRC, clamp jaws type, especially designed for picking and emptying drum. Barrels. Containers, one operator, max load 300Kg

Dantherm AC-M5 MKII Container Refrigeration System The component was part of a pilot plant that was in operation from 2019 to 2021. Manufacturer's description: The AC-M5 MKII is designed for window mounting in ISO containers. Together with the hinged door system, the air conditioner is mounted on the inside of the container wall. It is designed to be stored within ISO corners during transport or storage. The AC-M5 MKII slides into its hinged door system and is extended from the container for operation. Once extended, the device is locked from inside the container during operation. The device has no outside air ingress and is therefore fully CBRN/COLPRO compliant.

Double door autoclave De Lama model DLOV year of manufacturing 1998. Useful capacity 4990 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 6 kW. Maximum working pressure 2.5 bar. Maximum working temperature 138.2 C °. Installed cycles: A sterilization + drying B for vials C For closed containers I test cold vacuum machine J sterilization air filter in situ

Used laboratory dissolver by Diamac type 2HP. New 1999. Description: - infinitely variable speed control - manual column lifting with counterweight - current control box with inverter - suitable for small containers - height 1020 mm - width 560 mm - weight 80 kg - motor power 2 hp - speed: 0-3000 / min - dispersing disc diameter: 30/140 mm - voltage 380/400V and 220/230V - documentation + CE certificate

In our depot in Freilassing we always have new containers in different colours and finishes in stock. This ensures a short delivery time and the possibility to visit the containers before purchase. CHOOSE YOUR CONTAINER! PrimeQUALITY As a very special service we offer the option to buy a flawless first-trip container. For this purpose, transport damage is professionally repaired and dirt is removed. State New / First trip – with easy traces of usage through one-time sea voyage Color Bottle breakfast RAL 6007 (or subject to availability) TECHNICAL DATA Dimensions outside: (L x W x H) 6,058 x 2,438 x 2,591 mm Dimensions inside: (L x W x H) 5,844 x 2,330 x 2,350 mm Weight: approx. 2.22 t Payload: approx. 28.27 t Facilities CSC Safety Approval Material: CorTen steel, weatherproof Floor: 28mm hardwood, waterproof Doors: 270° opening, 4-fold linkage Coating: insi ...

DRENT GAZELLE 6 IMR-4 -Age 1988, Max web widht: 480 mms. -1 x Unwinder, 1 x infeed unit -1 x E L Web guide unit -4 x Printing units -1 x Processing unit with sprocket punching unit -2 x Slots for cross perforating cylinders -1 x Folder -Print Cylinder sizes: -3 x 11” -5 x 12 -2x10” -2x9” -2x13” -Many perforating cylinders -Under power in Italy DRENT GAZELLE 6 IMR-3 -Age 1983, Max web widht: 450 mms. -1 x Unwinder, 1 x infeed unit -1 x E L Web guide unit -3 x Printing units -1 x Processing unit with sprocket punching unit -2 x Slots for cross perforating cylinders -1 x Folder -Print Cylinder sizes: -3 x 12” -2 x 11 4/6” -3x 8 2/6” -3x14” -3x17” -Many perforating cylinders -Under power in Italy There is also available a third Gazelle 6 IMR with 3 colours of year 1988 used only for spare parts. Will be  ...

Easycount CD5 tablet counter Serial: 51002040 Stainless, easycount will make a precise inventory of all hard and soft gelatin capsules and most sizes and shapes of tablets, fill all kinds of containers exactly and automatically, check number of full containers at any time and identify how many pieces have been counted in the last and incomplete containers, 1Ph

Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued  ...

Emerito 1.8 Capper Serial: 624-p165 2016, Twist -off capping machine, lids from TO27 - TO82 diameter, height of lid up to 18mm DTO, Containers from diameter 30mm to 106mm, height from 40mm to 260mm, up to 70 bottles per min, variable speed, previously used on 50mm caps, 3Ph

New device Special offer!

Specifications: Indicative thermal dissipation, doors closed: side 1 - 0.9 kW, side 2 - 0.9 kA, Maximum operating pressure: 3 bar g Approximate weight of empty autoclave 5000 kg Power supply 400 V 50 Hz, 19 kW Pressure (bar g) Flow rate size P1 water recovery from chiller 1,5 120 l/min 34.8x1.65 P1 water from chiller for exchanger 2 120 l/min 34.8x1.65 G water for empty pump 2 20 l/min 15.75x1.65 E1 industrial steam for gap 3 250 kg/h 22.1x1,65 E1 saturated steam ( 95-97%) 3,5 800 kg/h 47.5x1,65 D1 oiled compressed area for tools 5,5 100 NL/min 9.4x1.65 D oiled compressed area for chamber3,5 300 NL/min 34.8x1.65 A general discharge 72.9x165 FIELDS OF APPLICATION The FOA air-steam mixture sterilizer is suitable for: - Sterilization of parenteral solutions, liquids in closed non-deformable containers (e.g., glass tubes) and liquids in closed deformable containers (e.g., ...

Used laboratory dissolver, column dissolver with geared motor and manual speed setting from Italian company Ferri Spa type F30/D. Description: - stepless speed adjustment - manual - manual column lifting with counterweight - current control box with control panel - suitable for small containers - height 1250 mm - width 600 mm - length 750 mm - weight approx. 80 kg - motor power 1 hp - number of engine revolutions 2800 - diameter of dispersing disc: 30/140 mm - voltage: 220/230V

PLC control system Compact design Jet filter cleaning Automatically changes cleaning period depending on dirtiness of filter Easy-to-change waste containers Soft start electrical panel Max. Airflow 8000 m3/h Motor Rating 11 kw -3 Ph Voltage 400 V - 50 Hz Pressure Max Airflow 2000 Pa Filter Quantity 126 Pcs Filter Sizes Q100x1100 mm Filtration Area 43.5 m2 Filter Type Polyester Needlefelt Waste Storage 570 liter Vacuum Diameter Q355 mm Filter Cleaning Pressurized Air Dimensions(LWH) 4050x1100x2500 mm Weight 1050 kg Other capacity availeable

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...

World’s most flexible stretch blow molding machines Model: FlexBlow 2 Cavities: 2 / 1 Maximum bottle neck diameter: 120 mm Maximum volume: 6 L / 1.6 gal Maximum output speed: 3000 BPH The widest neck and size range capability allows production of cosmetic containers, hot-fill, jars, and large containers. All on one stretch blow molding machine and at record complete mold and neck changeover times. For more info visit our website: flexblow ,com Keywords: stretch blow molding machine, stretch blow molding, pet stretch blow moulding machine, stretch blow, pet bottle stretch blow molding machine, reheat stretch blow molding, reheat stretch blow molding machine, 2 Stage Blow Molding Machine, pet stretch blow molding machine, reheat blow molding, stretch blow moulding machine, pet stretch blowing machine, pet stretch blow moulding, ,reheat blow molding machine, Two-Stage  ...

World’s most flexible stretch blow molding machines Model: FlexBlow 4 Cavities: 4 / 2 Maximum bottle neck diameter: 55 mm Maximum volume: 6 L / 1.6 gal Maximum output speed: 6400 BPH The widest neck and size range capability allows production of cosmetic containers, hot-fill, jars, and large containers. All on one stretch blow molding machine and at record complete mold and neck changeover times. For more info visit our website: flexblow.com Keywords: stretch blow molding machine, stretch blow molding, pet stretch blow moulding machine, stretch blow, pet bottle stretch blow molding machine, reheat stretch blow molding, reheat stretch blow molding machine, 2 Stage Blow Molding Machine, pet stretch blow molding machine, reheat blow molding, stretch blow moulding machine, pet stretch blowing machine, pet stretch blow moulding, ,reheat blow molding machine, Two-Stage Bl ...

World’s most flexible stretch blow molding machines Model: FlexBlow 2 Cavities: 16 Maximum bottle neck diameter: 43 mm Maximum volume: 2 L / 70 oz Maximum output speed: 26000 BPH The widest neck and size range capability allows production of cosmetic containers, hot-fill, jars, and large containers. All on one stretch blow molding machine and at record complete mold and neck changeover times. Gtwndh3he For more info visit our website: flexblow.com Keywords: stretch blow molding machine, stretch blow molding, pet stretch blow moulding machine, stretch blow, pet bottle stretch blow molding machine, reheat stretch blow molding, reheat stretch blow molding machine, 2 Stage Blow Molding Machine, pet stretch blow molding machine, reheat blow molding, stretch blow moulding machine, pet stretch blowing machine, pet stretch blow moulding, ,reheat blow molding machine, Two-S ...

Glass Bottle Filling Line foor Beer and CSD FRAMAX 3000 bph – 2017 This filling line is currently filling beer in 330 ml glass bottles with crown caps. This complete line was delivered by Italian Framax in year 2017 and it has operated only about 2510 hours. It contains automatic depalletizer, self-adhesive labeller, tri-bloc bottling machine and carton box packaging machine. Bottling machine consist of 16 clamps rotating rinser with single hot water treatment, an isobaric 16 valve counterpressure filler with double air pre-evacuation with CO2 and a single head crowner. Filling vales are DPS type the product is spread along bottle sides by a rubber packing mounted on the levelling system. As soon as the product level reaches the hole on the levelling system the filling nozzle is shut off mechanically by a control cam. Filler has also a fobber unit for foaming in order to reduce an ...

G.Webb RP760 High Speed rotary filler designed for high speed container handling and filling particularly aimed at powder & particulate packaging industry sectors. This includes pharmaceutical, chemical, and food ingredient companies using glass or composite containers, requiring clean & compact filling. previously used for HDPE jars and has change parts for 150g powder fill 70mm x 130mm, 300g powder fill 70mm x 135mm, 500g powder fill 75mm x 180mm, previously ran on 120 jars per min.