22 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Manufacturer:
(Category: 107-660)

IMS 1
sheet metal working / Profile Steel Cutters
11.09.2026
approved
dealer
item-No.: 162738102
New in: 1990

used

check
Location: Land-de

Lg.Nr. 25062 Specifications: - with pressure joining pliers ECKOLD, type MZ + hole punching device - Working pressure infinitely adjustable max. up to 500 bar - Compressive force joining pliers 25 Kn - Single cycle or continuous cycle - Cycle rate infinitely adjustable - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

sheet metal working / Profile Steel Cutters
15.04.2026
approved
dealer
item-No.: 162745691
New in: 1994

used

check
Location: Land-de

Flat steel shears - Flat steel 2° inclination 300 x 10 mm - Flat steel 5° inclination 200 x 13 mm - Knife length 305 mm Profile steel shears - L-profile at 90° 80 x 80 x 8 mm - L-profile at 45° 60 x 60 x 6 mm - Round steelØ 30 mm - Square steel 30 mm 3-point notching station - Flat steel 7mm - Notching depth 50mm - Notching width 40mm Punching station - Punching capacity 450 kN - Material thicknessØ 27 x 13 mm - Projection 175 mm incl. electric stop

sheet metal working / Profile Steel Cutters
23.06.2025
item-No.: 162705367
New in: 2004

used


round bar steel: 30 mmsquare edge steel: 25 mmL-beam: 28 x 10 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Profile Steel Cutters
23.06.2025
item-No.: 162708104

used


round bar steel: 30 mmsquare edge steel: 28 mmL-beam: 60 x 8 mmflat steel: 100 x 12 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,5 x 0,7 x 1,8 mProfile steel shears with notcherThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Profile Steel Cutters
23.06.2025
item-No.: 162721483

used


round bar steel: 30 mmsquare edge steel: 28 mmL-beam: 90 x 8 mm: 150 x 8 mmpressure: 35 ttotal power requirement: 2,8 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 0,75 x 1,0 x 1,5 mProfile steel shears combined with:- Foot switch- Length cutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Profile Steel Cutters
28.07.2026
approved
dealer
item-No.: 162740299

used

check
Location: Land-de
Price: 5.200 €

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

sheet metal working / Profile Steel Cutters
23.06.2025
item-No.: 162705964
New in: 1975

used


round bar steel: 35 mmsquare edge steel: 32 mmL-beam: 65 x 9 mm: 100 x 15 mmpressure: 45 thole punching press: capacity (dia. x thick.): 30x12 / 24x15 mmtotal power requirement: 2,8 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 0,75 x 1,0 x 1,5 mCombined steel section shears- Hole punch- Notcher- 2 foot switches- Tool cabinet including contents cabinet (see images)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Profile Steel Cutters
11.09.2026
approved
dealer
item-No.: 162745757
New in: 1990

used

check
Location: Land-de

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

sheet metal working / Profile Steel Cutters
11.09.2026
approved
dealer
item-No.: 162745759
New in: 1990

used

check
Location: Land-de

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

sheet metal working / Profile Steel Cutters
20.02.2025
item-No.: 162722243

used

Location: Land-de
Price: 14.300 €

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Support table on the punching side with stops Range of tools is included in the price Weight: 3,000 kg

sheet metal working / Profile Steel Cutters
28.07.2026
approved
dealer
item-No.: 162738645
New in: 1986

used

check
Location: Land-de
Price: 13.500 €

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg

sheet metal working / Profile Steel Cutters
28.07.2026
approved
dealer
item-No.: 162738647

used

check
Location: Land-de
Price: 8.700 €

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear With pipe notch on the steel bar shears Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

sheet metal working / Profile Steel Cutters
04.11.2026
approved
dealer
item-No.: 162755243

used

check
Location: Land-de

Profile steel shears Manufacturer: Mubea Muhr + Bender Type: MIW 400 Year of manufacture: unknown Compression/punching force: 40 tons (400 kN) Punching performance: Hole diameter up to max. Ø 30 mm in 10 mm thick steel (or Ø 20 mm in 15 mm steel) Punching projection: 175 mm (working height: 1055 mm) Flat steel shears: Cuts flat material up to 150 x 10 mm as standard Profile and bar steel cuts: round steel up to Ø 30 mm and square steel up to 28 mm Weight: approx. 800 kg

sheet metal working / Profile Steel Cutters
29.04.2025
item-No.: 162713827

used

Location: Land-de
Price: 4.800 €

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

sheet metal working / Profile Steel Cutters
23.06.2025
item-No.: 162705238
New in: 1978

used

Location: Land-de

round bar steel: - mmsquare edge steel: - mmL-beam: - mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 2,212,35 mdiv. punches and diesFoot switch Spare bladeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Profile Steel Cutters
23.06.2025
item-No.: 162703742

used


round bar steel: 42 mmsquare edge steel: 38 mmL-beam: 110 x 10 mmcutting capacity: 150 x 16 mmpressure: 60 thole punching press: throat: 370 mmhole punching press: capacity (dia. x thick.): 25 x 16 / 20 x 19 mm: 720 x 420 mmtotal power requirement: kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 1,8 x 1,6 x 1,85 mProfilstahlschere- inkl. FußschalterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Profile Steel Cutters
23.06.2025
item-No.: 162723590

used

Location: Land-de

round bar steel: 50 mmsquare edge steel: 45 mmL-beam: 140 x 13 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mab Standort preiswert gegen Gebot abzugeben!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Profile Steel Cutters
28.07.2026
approved
dealer
item-No.: 162747247

used

check
Location: Land-de
Price: 8.800 €

Max. punching capacity: 400 kN Max. shear capacity: 600 kN Punches 20 mm holes in 16 mm steel Shears on the flat steel shear to 300 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 1,500 kg

sheet metal working / Profile Steel Cutters
28.07.2026
approved
dealer
item-No.: 162739663

used

check
Location: Land-de
Price: 13.200 €

Max. punching capacity: 800 kN Max. shear capacity: 1100 kN Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of stamps and dies as desired

sheet metal working / Profile Steel Cutters
28.07.2026
approved
dealer
item-No.: 162738270
New in: 1992

used

check
Location: Land-de
Price: 9.800 €

Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired

sheet metal working / Profile Steel Cutters
28.09.2026
approved
dealer
item-No.: 162739457
New in: 1974

used

check
Location: Land-de

Type : Peddy Year of manufacture : 1974 Specifications: Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg

sheet metal working / Profile Steel Cutters
04.11.2026
approved
dealer
item-No.: 162755156

used

check
Location: Land-at

Profile steel shears, 80/110, Mas. No. 4423251690035 See photos

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996