used Repelletising plants for sale

A first-class extrusion recycling brand EREMA Series Type 1108 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 300 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

A first-class extrusion recycling brand EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 460 volts, 60 hertz (US standard), available immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

A renovated extrusion recycling brand EREMA INTAREMA 1310 TVEplus for processing polyethylene (PE) and polypropylene (PP), polystyrene (PS), with laser filter and screen changer, degassing for processing printed films. Output up to 850 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Financing possible without personal liability. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +0049 1577 5329827

Screw Diameter: 100 mm // Output Capacity: 600 kg/h

First-class renovated extrusion recycling plant made by EREMA Intarema 2018 TVEplus for the processing of post-consumer polyethylene and polypropylene, capacity up to 2,400 kg/h, built in 2019 for sale. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Extrusion recycling line made by EREMA type that has only been in use for a few years VACUREMA ADVANCED 1310T for the processing of rPET, Year of construction 2017, commissioning 2019, Capacity 600 kg/h, Approval in accordance with the standards of the F.D.A. (USA) and ESFA (EU) for the approval of the rPET granules produced with it is available. You can find more details at EREMA Vacurema Advanced. Delivery Time: Short Term. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Screw Diameter: 85 mm // Output Capacity: 500 kg/h

Screw Diameter: 75 mm // Output Capacity: 200 kg/h

Plasmac ECO60HC recycling machine from 2014. Output approx. 100 - 120 kg/hour. A barrel and the screw is refurbished A motorized roll feeding unit is included Complete with water chiller unit.

Brand new machine for increasing intrinsic viscosity (I.V.) for external production in batches. The I.V. value of low-quality, very inexpensive rPET with low IV values of e.g. 0.3 dl/g is improved to the higher IV value of e.g. 0.76 dl/g with little effort. With another extrusion line for solid state polycondensation (SSP), a first-class rPET can be produced in accordance with the regulations of the F.D.A. (United States) and EFSA (EU). The indicated procedure enables cost advantages. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Brand new machine for increasing intrinsic viscosity (I.V.) for external production in batches. The I.V. value of low-quality, very inexpensive rPET with low IV values of e.g. 0.3 dl/g is improved to the higher IV value of e.g. 0.76 dl/g with little effort. With another extrusion line for solid state polycondensation (SSP), a first-class rPET can be produced in accordance with the regulations of the F.D.A. (United States) and EFSA (EU). The indicated procedure enables cost advantages. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Screw Diameter: 85 mm // Output Capacity: 500 kg/h

Year: 2003, low working hours, in good condition Availability: immediately. Current condition: can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Material force feeding screw: available, Degassing system: available, Cutting head type: head cutter, air cooled. Material suitable for processing: PE/PP/PS. Humidity max 3 % Equipment: Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control box, Pressure control, Air cooling, conveying, Venturi, cyclone and pipes... Dimensions: 6,40 m length x 2,10 m width x 4,30 m height Installed power: 30 Kw.