19 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Manufacturer:
(Category: 206-1428)

OMC 1
presses / Veneering presses
03.11.2026
approved
dealer
item-No.: 162752112

used

check
Location: Land-de
Price: 5.800 €

L. 2500 x B. 1300 Bürkle Veneer press 6 Column Cylinder 98 tons of pressure Heating plates Safety line Immediately available

presses / Veneering presses
22.07.2026
approved
dealer
item-No.: 162742509

used

check
Location: Land-it
Price: 1.300 €

Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

presses / Veneering presses
16.10.2026
approved
dealer
item-No.: 162739919

used

check
Location: Land-it

Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

presses / Veneering presses
19.05.2025
item-No.: 162712633

used

Location: Land-it

HYDRAULIC PRESS with hot platens model ITALPRESSE SCF 6 second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.70 max. thrust Ton. 120 opening mm. 400 hydraulic pump motor power Hp 3 hot water plates heating via wood boiler weight kgs. 4500 volt. 380/50

presses / Veneering presses
11.09.2026
approved
dealer
item-No.: 162751936

used

check
Location: Land-it
Price: 2.500 €

Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

presses / Veneering presses
09.06.2026
approved
dealer
item-No.: 162747860

used

check
Location: Land-it
Price: 2.900 €

Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

presses / Veneering presses
11.11.2026
approved
dealer
item-No.: 162746435

used

check
Location: Land-it
Price: 2.800 €

Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

presses / Veneering presses
03.08.2026
approved
dealer
item-No.: 162743750
New in: 1964

used

check
Location: Land-de
Price: 2.500 €

Panel dimensions 2.2x1.25 m The machine is functional, but the cylinders are leaking. The sale is in the condition as it is, excl. Warranty, from our warehouse in Düsseldorf, freely loaded.

presses / Veneering presses
06.11.2026
approved
dealer
item-No.: 162755098

used

check
Location: Land-de

Veneer press Joos Type HP 90 Pressing area 2550 mm x 1350 mm Gold Anodized Press Plates Ripcord all around Swivel keyboard operation Press chamber height, insertion height 400 mm Total pressing pressure 900 KN Press cylinder 4 pieces, diameter 90 mm Spec. Pressure at full design 2.7 kg/cm² Spec. Pressure at 2m² Design 4.5 kg/cm² Operating pressure 355 bar Power requirement 1.1 kW Closing time approx. 16 sec. Basic dimensions approx. 2950 mm x 1560 mm x height 2210 mm Weight 3,600 kg

presses / Veneering presses
02.05.2025
item-No.: 162713518

used

Location: Land-de

-) Press surface: 3,100 x 1,600 mm -) Cylinder: 8 cylinders -) Floors: 5 floors, 6 heating plates -) Heating plates: drilled 40mm steel heating plates -) Heating: for hot water or thermal oil (up to 200° -) Press opening: up to 600 mm -) Cooling: with own unit Etc.

presses / Veneering presses
17.07.2026
approved
dealer
item-No.: 162749358

used

check
Location: Land-pl

Manni 2500×1300 veneer shelf press Shelf length 2500mm Shelf width 1300mm Load height 410mm Working pressure 300bar Press on 4 cylinders Net price

presses / Veneering presses
30.05.2026
approved
dealer
item-No.: 162747541

used

check
Location: Land-pl

Orma C4 2200×1200 veneer shelf press Shelf length 2200mm Shelf width 1200mm Maximum clearance between shelves 475mm Maximum working pressure 150bar Press on 4 cylinders 1.1kw Hydraulic Pump Motor Shelves heated with CO water Net price

presses / Veneering presses
15.11.2026
item-No.: 162743976
New in: 1999

used

Location: Land-de
Price: 7.000 €

ORMA 3-deck press NPC 26/14-3V + Höllenholscher Kühlstern discharge from site for sale.

presses / Veneering presses
09.10.2026
approved
dealer
item-No.: 162753589

used

check
Location: Land-pl

Shelf press for veneering ORMA NPC 6/100 Shelf length 2500mm Shelf width 1300mm Number of batches 3 Automatic pressure boosting Safety cable "breakaway" Water press heating with water from the CO system Working pressure 350bar Press on 6 actuators Piston rod diameter 85mm CE Certificate Machine dimensions 340x165x255cmH Machine Weight 6000kg

presses / Veneering presses
14.07.2026
approved
dealer
item-No.: 162748511

used

check
Location: Land-it

Code: 0421 Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press with diathermic oil heating for wood, joinery, furniture, custom-made furniture, panels, doors, composite materials and various – CE Standard Platen sizes mm 3000 x 1580 Solid steel platens with diathermic oil heating N° 6 pistons diameter 85 Opening mm 400 Platens heating by electric boiler Thrust 120 ton Guides side racks Mylar-coated platens Overall dimensions mm 3700 x 1850 x 2600 h

presses / Veneering presses
15.07.2026
approved
dealer
item-No.: 162748884

used

check
Location: Land-it

Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Heating with diathermic oil by electric boiler Mylar-coated platens Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

presses / Veneering presses
16.11.2026
approved
dealer
item-No.: 162754265

used

check
Location: Land-it

Code: 0412 Brand: ORMAMACCHINE Model: NPC/R 35/13 - CE Standard Hydraulic hot press for joinery, furniture, bespoke furnishings, veneering, panels, doors, wooden joinery, composite materials and miscellaneous items – CE Standard Sturdy construction Solid perforated steel platens 3500 x 1300 mm Fixed lower plate – Movable upper plate Plate thickness 80 mm 6 pistons diameter mm 85 Total thrust 120 ton Option for either oil or steam heating Installed power 8 Kw Overall dimensions mm 4500 x 1550 x 2700 h Weight kg 10000

presses / Veneering presses
17.07.2026
approved
dealer
item-No.: 162749342

used

check
Location: Land-pl

Shelf press for veneering SIPA 2500×1280 Shelf length 2500mm Shelf width 1280mm Load height 440mm Operating pressure 120bar Press on 4 cylinders Shelves heated with boiler water

presses / Veneering presses
15.09.2026
approved
dealer
item-No.: 162752110

used

check
Location: Land-it
Price: 3.200 €

Code: 0479 Brand: SIPA Model: S20F Hydraulic cold press for panels, doors, furniture, timber, composite materials, engineering materials, plastics, aluminium and other materials Steel frame Platen dimensions 2500 x 1300 mm Platens opening 500 mm Total pressure 20 t N° 2 cylinders diameter 40 mm Motor power 1,5 Hp Overall dimensions mm 2800 x 1300 x 2110 h Weight kg 740

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996