Suction nozzle diameter: 200mm;
Nominal flow rate: 2780 m³/h;
Volume flow monitoring: pressure differential indicator;
Negative pressure: 1580 pa;
Filter area: 13 m²;
Filter cleaning: pneumatic;
Motor power: 3 kW;
Machine length: 2000 mm;
Machine width: 800 mm;
Machine height: 2200 mm;
Weight: 240;
The dust extractor is suitable for vacuuming dry wood dust
and
dry wood chips at individual dust sources. This also applies
for oak and beech wood dust. Furthermore, metallic, ceramic,
organic dusts of dust explosion class St1 and St2
can be
extracted.
If the dust extractor is properly connected to a
woodworking machine
with a dust source (e.g. circular saw,
milling machine, planer, belt sander)
and operated in accordance
with the regulations, the necessary extraction performance
and
separation qualityâ is always guaranteed.
When vacuuming a
“dust-tested†woodworking machine with
a dust source,
the use of the dust extractor means that the
TRK value of 0.1
mg/m3 is maintained permanently
reliably at this machine
workstation if no disturbing external influences are present.
The metrological monitoring of such a workplace is then omitted!
In order to maintain these advantages of the dust extractor
for a long time,
Be sure to follow these operating instructions.
Read them carefully before
first start-up. Then you will enjoy
the
the trouble-free operation of the dust extractor. If
any questions arise, please do not hesitate to contact us
.
We hope you enjoy the
suction power and easy handling when
working with the new device.
For any necessary accessories,
please refer to the enclosed
documents.
Germany
bei uns in Herrnzell 
