BRANDT KDF 660 Profiline single-sided edge banding with joint milling,
pre-milling, fine milling, 2-fold corner copying, radius drawing
blade, flat-drawing blade and babble units
Type: KDF 660 Profiline
Specifications:
BRANDT KDF 660 Profiline with joints and corner rounds
Preheating of the tool stucco IR preheating
Edge thickness 0,4 - 15mm
Banding height max. 66 mm, with program high adjustment
Caps from the roll at 3mm thickness max 45mm height or 0.8 65mm
Plate thickness max. 8-60 mm for corner copying max 40mm
Control PC20+ link control (loss of contact), with modem for remote
service/maintenance
1. Joint unit program Adjustment of the infeed line
2. Bandkapmesser
3a. Radiant heater High-strength bonding by workpiece preheating
3b. Spray anti-adhesive
3c. Quickmelt Glue Mel Mel Application Unit with Quick Change
3d. Leimangabe by means of glue roller in continuous or reverse
rotation and small volume Quickmelt application unit with quick
change
3e. Program adjustment pressure zone
4. Cap saws - adjustable to chamfer 15° program adjustment
5a. Flush milling radius milling unit 2-point adjustment, edge
thickness up to 12 mm.
5b. Fine millingRadius milling unit Program adjustment flat, chamfer,
radius.
6. Corner rounding unit - 2 motors - Program-controlled edge thickness
adjustment
7a. Profile drawing blade, with interchangeable heads
7b. Flat-drawing blade
8a. Detergent spraying device
8b. Swirling units
Transmission with synchronous and reverse rotation
Feed 8-18 m/min
Power supply 24KW/400V/50Hz
Tool support radius 2/3mm
Suction connection 120 + 2100mm
Suction capacity 3,000 m³/hour
Air consumption approx. 350 NL/min
Air pressure 6 bar
Joint milling unit 2 2.2 kW 200 Hz FG 3500
Motor strengths Cap saws 2 0.35 kW 200 Hz 12,000 rpm
Pre-milling motor strength: O/U 2 0.55 kW 200 Hz 12,000 rpm
Milling units O/U 2 0.55 kW 200 Hz 12,000 rpm, program-controlled
Motor strength corner copying 2 0.35 kW 200 Hz 11,000 rpm
Swirling units 2 0.18 kW 50 Hz, 150 20 mm
Machine dimensions: LHD 6.360mm 1370mm 620mm (1030mm with plate)
Machine weight: 3.000 KG
Condition: still in operation - Full function test before disassembly
- Available July 2023
Netherlands
7468 ENTER 
