gluespreader machines used for sale

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

: 0,4 - 3 mmWorkingpiece thickness from to: 10 - 45 mmTotal length: 3.200 mmFeed speed: 8 m/min.total power requirement: 5,5 kwWeight: 450 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Flat scraper: Ja Number of working hours: ca. 1.288 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4 -3 mmWorkingpiece thickness from to: 10 - 45 mmTotal length: 3.200 mmtotal power requirement: 5,5 kwWeight: 450 kgfeed: 8 m/minPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Flat scraper: Ja Number of working hours: ca. 439 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4 - 3 mmWorkingpiece thickness from to: 10 - 45 mmTotal length: 3.200 mmFeed speed: 8 m/min.total power requirement: 5,5 kwWeight: 450 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja : Ja Flat scraper: Ja Number of working hours: ca. 903 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Glue Applying Machine FRIZ 2800 mm 4Roller glue application machine Type LAS 2 Machine No. 734 Built in 1972 Working width 2800 mm Roller length 2850 mm 2 rubberized fluted application rollers diameter approx. 280 mm 2 chrome-plated dosing rollers diameter approx. 220 mm Electric height adjustment Maximum passage height 100 mm Roller spacing of metering rollers maximum 80 mm Feed speed 28 m/min. Drive motor 3.0 kW Lifting motor 0.25 kW Pump motor 0.8 kW Emergency stop ripcord on both sides Dimensions 4700 mm x 1200 mm x H 2200 mm The machine is currently being checked, cleaned and overhauled

IDM manual edgebanding machine for shapes model KOMPACT according to CE standards

Working height 900mmNominal width 1400mmEffective working width 1370mmRolling pressure force max 5kNPassage height max 120mmFeed transport 6-50 m/min stepless/frequency controlledPlate width min 200mmPlate length min 350mmPanel thickness min 3mmGlue hot melt PURApplication rate 40-80g/mDriving power 6kWTempering device 24kW

Wood Her Auriga 1304 FU + PU Compact design - edge thickness 0.4 - 3 (8) mm Control panel with selector switch for setting the units Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET / cartridges + PU gluing Workpiece height 6 - 45 (60) mm Auto. Glue height adjustment - PROBE NOZZLE Printing unit pneumatic Cross-cut unit 1918 pneumatic for roll and strip goods with pneumatic adjustment of 0-10° slant of the cross-cut saws Multifunction milling unit pneumatic, flush milling 8 mm, radius milling 3 mm, chamfer milling, swivelling 0° - 15° Scraper unit for chamfers and radii with 2 scraper carriers Pneumatic engagement and disengagement Surface Scraper Unit - Finish Machine is WORKSHOP OVERHAULED in TOP CONDITION from stock Lieboch

Edge thickness: maximum 20mm; Workpiece thickness: from 8mm - 60mm; Workpiece width: minimum 60mm; Leimangabe: cartridge; Cross-cut scissors: yes; Milling Station 1: Flush; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 7kW; Machine length: 2.8m; Machine width: 1.2m; Weight: 800kg;

Fields MG 580X+ Edge thickness 0.4 - 5 mm Control panel with 5.7 touch color screen Pre-milling unit for attaching in front of the glued part Automatic edge magazine for roll materials - 3 mm Strip banding with single feed Teflon-coated glue basin for EVA + PUR hot-melt adhesive granules with pneumatic end position damping Short heat-up time Workpiece height 8 - 60 mm Finely adjustable glue roller Impact shears up to 64 mm material height for pre-capping roll material Printed work Cross-cut unit for roll and strip goods, 45° working angle and bevel capping 0°/20°, pneumatic Multifunction unit flush-radius and chamfer milling, pneumatic Corner rounding unit pneumatic Radius scraper pneumatic Pneumatic surface scraper Buffing unit Year of construction: 2011 Machine is FUNCTIONAL TESTED in VERY GOOD CONDITION From stock Lieboch 

Electric pneumatic edge press Haug HFK 2200 for pressing edge material on wood with heating. Incl. 3 table extensions Swivel worktable, Working size max. approx.: 1,400 x 2,500mm, heater: 1,7 kW

Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible.

AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit ...

AUTOMATIC EDGE BANDER machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner technical data : min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin composition : gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n ...

Hymmen glue application machine 4 Roller Glue Dispensing Machine Type LA 4W Working width 1300 mm 2 rubberized fluted rollers The rubber lining/fluting is in poor condition See pictures 2 rubberized smooth rollers Ribbed rollers diameter 230 mm Smooth rollers diameter 180 mm Maximum passage height 100 mm Application speed 10 and 20 m/min. Motor power 1.1 kW Emergency out of leverage Dimensions 1950 mm x 1100 mm x H 1150 mm Weight with pallet 1300 kg Machine is function-tested Sale in actual condition

: 0,4 - 3 mmFeed speed: 8 - 20, Variabel m/min.Workpiece thickness max.: 60 mmworkpiece width - max.: 60 mm: Ja Premilling unit: Ja : Ja : Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Groove milling aggregate: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hebrock K34 PLC Screen Control with 15 Touch Screen Pre-milling unit for attaching in front of the gluing part (3mm) Glue basin with alternating basin and adhesive spout device Edge height max. 60 mm Cross-cut unit Milling unit flush/radii/chamfer milling Corner Round Unit Radi/Chamfers Multiradius scraper blade /R1/R2) Nesting Wing Scraper Release agent spraying device Year of Build 2023, 52 Hours Machine is MINT in TOP CONDITION From joinery liquidation / retirement from the carpentry workshop

Panel gluing line Drawing number: PVP-00-00-00-1165 ELECTRO-OIL-HYDRAULIC DESIGN with electric heating plates Clamping size: 3,000 x 1,300 mm Maximum wood thickness: 70 mm Minimum wood thickness: 4 mm Fed with: 10 pcs hydraulic cylinders ø35 x 95 mm stroke (Press force max. at 200 bar = 1,900 daN) with fold-up thrust pieces for narrow Workpieces 3 hydraulic cylinders ø60 x 250 mm stroke for operating the upper heating plate (Press force max. at 160 bar = 5,000 daN) 1 pc. pressure control valve for the upper heating plate 1 pc. pressure control valve for the press cylinders 1 infinitely adjustable timer for automatic opening of both the heating plate and also the hydraulic cylinder Technical data of the heating plates: ELKOM - Electric heating plate made of aluminium in sandwich structure Maximum usable temperature: 120°C Surface hard anodized Power consumption: ...

Demonstration and trade fair machine. including suction line. Equipment: European safety regulations (sign C.E.) olimpic 500 - Version HP T-ER2 (40) Volt 400 EU Frequency 50 Hz Control console eye-S (control panel) Human-Machine Surface Software (HMI) Maestro active edge Maestro connect: Preparation without gateway for subsequent installation Fine milling and radius pulling blade unit radius = 1 mm Fine milling and radius drawing blade unit radius = 2 mm Electronic positioning of the upper pressure beams Spacers on the inlet ruler Kit SAV€NERGY Interior lighting of the cab and the gluing area Nesting sensing rollers Release Agent Spray Unit AAR Sprayer for finishing the edge Sprayer for sensitive edges Joining unit RT-V1 EASY SIZE device Glue unit VC-VM Ceramic lamp with infrared rays Electronic positioning of the pres ...