used BRANDT for sale

Brandt optimat edge banding machine KD 56 Adhesive application pneumatic pre-shear pressure rollers Ready-made cutting balls Up-down milling unit R1 – R2 profile scraper Polisher max element height 45mm max thickness of veneer in a roll 3mm feed rate 9m/min machine length 310cm air demand 6 bar The machine is tried and tested, it fully fulfills its functions

Joint milling Kappsaegen Buendingfraesen Corner copy milling Scraper blades Wobble

Edgebander BRANDT highflex 1440 well equipped, PRE-CUTTERS Adhesive application pneumatic pre-shear pressure rollers Ready-made cutting balls Milling unit up-down 2 x Earning Unit profile scraper flat cyclin Polisher The machine has an NC cutter control and a pneumatic package max element height 60mm max thickness of veneer in a roll 3mm feed max 14m/min machine in working order, can be checked before purchase

Banding thickness max 12 mm Plate thickness max 60 mm Thickness of roll material max 3 mm Workpiece width min 70 mm Feed max 18 m/min Feed infinitely variable Motorized height adjustment Glue system granules Premelting tank BRANDT Glue System QUICKMELT KD 2 x PU glue basins Stripe magazine Joining milling unit Cross-cut saw unit 2 motors Flush/Radius/Chamfer Stations 1 Corner Copy Unit 2 Motors Scraper unit Profile Scraper, Flat Scraper Buffing unit

Pre-milling unit Glue station for granules pneumatic pre-trimming guillotine Pressure zone with three rollers Two-ball unit for precision cutting Up/down milling unit with profile cutters Corner trimming unit profile scraper flat cyclin automatic lubrication of the conveyor Year of production 2009

Glue station for granules Pressure zone with three rollers pre-cutting guillotine Precision cutting unit Up/down milling unit with profile cutters profile scraper

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 220 C, built in 2014: Configuration: Input stop manually adjustable Manually adjustable joint milling Edge banding EVA glue / PUR glue possible Material pressure zone manually adjustable Cross-cut saws pneumatically adjustable Radius milling at the top + bottom manually adjustable Round unit 1-motor manually adjustable Radius scraper R2 can be adjusted pneumatically (set R1 included) Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Length including feed plate 4150mm Weight 1320kg Very good condition, fully functional ! Including full documentation and CE. Available the same.

Brandt Optimat KD-83-F Edge thickness 0.4 -12 mm Auto. Control panel - PLC control Pre-milling unit for attaching in front of the glued part Car. Edge magazine for roll and strip goods Gluing unit with rapid heating basin / INFRARED control Workpiece height 10 - 55 mm Printing unit pneumatic Cross-cut unit for roll and strip goods up to 12 mm edge thickness with changeover of 0-15° bevel of the cross-cut saws Milling unit, flush milling, radius milling, chamfer milling - 25° Scraper unit Buffing unit Soundproof booth CE version Machine is in EXTREMELY NEAT CONDITION from carpentry dissolution - craft business ex location

Equipment: - Gluing part for hot-melt adhesive granules - Cross-cut saw unit - Flush milling unit at the top and bottom - Scraper unit for PVC edges - Buffing unit 2 motors - Control panel at the machine inlet Specifications: Workpiece thickness 8 - 40 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge thickness: Fixed lengths 0.4 - 3.0 mm max. (3 x 45 mm) Roll cutting 0.4 - 3.0 mm (max. 3 x 30 mm / 0.8 x 45 mm) Feed rate approx. 9 m/min. Electrical 400 V - 3 Ph. - 50 Hz Connected load 3.8 kW Compressed air connection 6 bar Weight approx. 860 kg Machine length approx. 3075 mm

Equipment: - Quick-change gluing part for hot-melt adhesive -Auto. Edge magazine with roller plate - Pressure zone with pneum. pressurized pressure roller and 2 free-running holding pressure rollers - Power Control PC 20+ control - Adjustable inlet ruler - Joining milling unit 2 x 2.2 kW - pneum. Adjustment caps, scraper, program adjustment side strop rollers and pneum. 2-point adjustment vertical sensing rollers - Cross-cut unit 2 x 0.18 kW - Milling unit 2 x 0.55 kW - Shape milling unit 1 x 0.35 kW - Scraper unit for PVC edging - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit Specifications Edge thickness 0.4 - 8 mm Roll separating max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 - 60 mm Feed max. approx. 11 m/min. Electrical 400 V - 3 Ph. - 50 Hz Connected load approx. 10.5 kW Pneumatic connection 6 bar Overall length 4, ...

Banding thickness max 3 mm Plate thickness max 50 mm Thickness of roll material max 3 mm Workpiece width min 70 mm Feed max 10 m/min Preheating zone Glue system granules Glue basin at the bottom Quick-change glue basin Joining milling unit Cross-cut saw unit 2 engines Flush/Radius/Chamfer Stations 1 Corner Copy Unit 1 engine Scraper unit Profile Scraper, Flat Scraper Buffing unit Stripe magazine Units clocked pneumatic Execution Right-wing machine Machine length 4,150 mm Control BRANDT EASYCONTROL EC 10+ CE mark Total connection 9.5 kW Very good condition

Workpiece length: 1800-4200mm, max. profile height: 200mm, min. workpiece thickness: 16mm, working height: 950mm, connection cable: 12kW, length: 6250mm, height: 2050mm, weight: 3.8t.

Manufacturer: BA, Type: 143, Year: 1992, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Edgeband thickness max mm: 3, Panel length min mm: 250, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 0,5, Trimming saw: yes, Flush/radius/chamfer milling: yes, Machine lenght mm: 1000, Maschine vorführbereit: yes, Year :1992

Manufacturer: Brandt , Type: KS 25, Year: 1991, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 14, Premilling: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Flat scraper: yes, Bonding part EVA: yes, Top pressure belt/roller: Rolle, Werkstückunterstützung: yes, Freiplätze: keine, Year :1991

Manufacturer: Brandt, Type: KD 99, Year: 1998, Control: Homatic, Min-max edge material mm: 0,4 - 3,0, Work piece width min-max mm: 62, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 60, Edgeband height max mm: 62, Premilling: yes, Bevel milling: yes, Corner tracing type: yes, 4 Motoren: yes, Nuten : yes, Radius scraper: yes, 4 Motoren: yes, Compressed air bar: 6, Machine lenght mm: 8740, Noise enclosure: yes, Rückführung Typ: yes, machine ready for demonstration: yes, Year :1998

Manufacturer: Brandt , Type: KD 79/2 CF, Year: 2002, Min-max edge material mm: 0,5-3,0, Min-max feed m/min: 18, Axis control: no, Premilling: yes, Fine milling: yes, Application of separation agent: no, IR zone: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Year :2002

Manufacturer: Brandt, Type: Eckenkopierautomat, Year: ca.1995, Control: hand, Monting of the machine: 1 Fräsmotor mit<CRLF>tastung, Year :ca.1995

Manufacturer: Brandt, Type: KS 23, Year: 1988, Min-max edge material mm: 0,5-12, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 12, Premilling: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Edge sanding: yes, Year :1988

Manufacturer: Brandt, Type: KTD 72, Year: 2002, Control: yes, Glue application: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Edgeband thickness max mm: 3, Thickness of coiled edgeband max mm: 3, Feeding speed max m/min: hand, Thickness of coiled edgeband max mm: 3, Inner circle min mm: yes, Total power kW: 8, Feeding speed max m/min: hand, Compressed air bar: 6, Wight approx. kg: 300, Required space L x W x H mm: 1500 x 1500 x1200, Year :2002

Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000

Manufacturer: Brandt, Type: Optimat F 13, Work piece width min-max mm: 50, Edgeband thickness max mm: 0,5-3, Edgeband height max mm: 55, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 2 x 0,5, Work piece width min-max mm: 50,

Manufacturer: Brandt Eckenkopiergerät, Type: FP 10, Edgeband thickness max mm: 3, Edgeband height max mm: 55, Working widht max mm: 80, Kopierfunktion single sided: yes, Tracing by roller: yes, Cycle time automatic: yes, Engine milling kW: 0,5, Compressed air bar: 6, Wight approx. kg: 150,

Edge banding machine Type: KDF 440 Manufacturer: Brandt Year: 2010 In good condition, under power Find more here - / Contact us at -

This BRANDT KDF 680 edgebander was manufactured in 2008. It is a robust and reliable machine, ideal for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 680 edgebander. Contact us for more information.

This BRANDT Ambition 1660 FGC edgebander was manufactured in 2010. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this BRANDT Ambition 1660 FGC edgebander. Contact us for more information.

This BRANDT Highflex 1440 edgebander was manufactured in 2010. Ideal for precise edgebanding applications, it ensures consistent performance for a variety of woodworking tasks. Consider the opportunity to buy this BRANDT Highflex 1440 edgebander. Contact us for more information.

This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information.

This BRANDT KDF 991 edgebander was manufactured in 2008. It is designed for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 991 edgebander. Contact us for more information.

This BRANDT KDF 230C Ambition 1230 FC edgebander was manufactured in 2016. It features a robust through-feed system, pneumatic connections at a minimum of 6 bar, and a working height of 950 mm. The machine is equipped with multiple processing units including glue, cutting, and milling aggregates, ensuring versatility in edgebanding operations. If you are looking to get high-quality edgebanding capabilities consider the BRANDT KDF 230C Ambition 1230 FC machine we have for sale. Contact us for more information.

Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0,5 - 1 mm Feed speed: ca. 4 m/min Only coil edges

Min/Max. workpiece length 1800 / 4200 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW

Max. wworkpiece length 4500 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW

Min/Max. workpiece length 1800 / 4200 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW

Static contour trimming machine for rounding off edges to softformed or postformed panels. The machine has a tracing roller and a trimming motor and carries out both symmetric and asymmetric copying work (by means of plc controlls). For the finishing a polishing brush has been built up additionally. Max. workpiece thickness: 55 mm. Max. workpiece width: 80 mm. Max. profile depth 80 mm. Max. edges thickness: 3 mm. Motor: 0,5 kW.

Working piece thickness (Radius) ca. 16 - 55 mm Working piece thickness (Chamfer) ca. 12 -55 mm Working piece width min. Ca. 30 mm Inner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours) Edge thickness max. ca. 3 mm Milling motor 2 x 0,4 kW, 10950 o/min. Dust extraction 1 x diam. 80 mm Working height 900 mm Radius 3 mm tooling