used HOMAG for sale

Inv. Num. : 8343 Type: HPP 300 profiLine Producer: HOMAG Created: 2017 Parameters: Cutting length: 3200 mm Maximum format size: 3200 x 3100 mm Equipment: NC control

for the production of furniture parts made of wood or wood-like materials WORKPIECE DIMENSIONS Length: min. 20 mm max. 1,250 mm Width: min. 20 mm max. 800 mm Note: The workpiece width should always be larger in proportion to the workpiece thickness. Thickness: max. 80 mm, min. 10 mm Active center stop: length max. 600 mm PLACEMENT - 1 vertical drilling gear with 3 individually retrievable spindles, spindle base: 32 mm Adjustment range in Y-direction: 0 - 50 mm (with a drill diameter of 20 mm) Max. drill diameter: 35 mm - 1 horizontal drilling gearbox with 3 individually retrievable spindles, spindle base: 32 mm Adjustment range in Z-direction: -5 - 65 mm - 1 dowel unit (at a distance of 32 mm from the drilling spindle) - 1 glue unit with adjustable glue quantity - Glue flow monitoring - Cleaning device for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm  ...

Short description of the equipment: - Console clamping table K - 4 lifting rails on the consoles - POWER CONTROL - Control with PC 85 - Main spindle 14.5 kW vector-controlled, water-cooled - Aggregate interface main spindle, incl. pneum interface and C-axis swivel drive (torque entrainment / 3-point support) - Plate changer 18-fold - 1 pickup space for Castor unit - Drill head 17 vertical spindles, 11 spindles in the X direction, 7 spindles in the Y direction - Laser positioning aid - Pendulum machining Specifications: - Workpiece length max. 4500 mm - Workpiece width max. 1300 mm for milling with tool Ø 20 mm - max. 1150 mm for all units Workpieces larger than 1150 mm must be attached to the longitudinal stops at the rear - Workpiece thickness max. 60 mm with standard clamp, max. 200 mm with clamping templates (customer's side) - Total extraction capacity 5,000 m� ...

Specifications - Press pressure (fixed): - Vertical: max. 15 kN - Horizontal: max. 15 kN - Positioning speed: - Rapid traverse: 50 mm/s - Creep trajectory: 25 mm/s - Working height: 300 mm - Weight: approx. 2.2 t - Pneumatics: none - Transport interface: no -Floor space: - Length: 4,000 mm - Depth: 750 mm - Height: 2,300 mm - Required room height: 2,500 mm Body dimensions: - Length: 250...2,500 mm - Depth: 250 to 700 mm - Height: 150...1,400 mm Power supply - Operating voltage: 380-480 V, 50/60 Hz - Control voltage: 24 V DC according to VDE - Connected load: approx. 4 kW - Not suitable for connection to an RCD. - Prescribed ambient temperature: +5 ... +35 degrees Celsius Flooring requirements - Concrete quality C16/20 XC1 - Tensile / compressive strength - Minimum thickness: 150 mm Certification Machine with CE mark in accordance with EC Machinery  ...

Power Control PC85, Woodwop, ATC 12-fold, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum assignment, edge height max. 65 mm, chip and offcut disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled

Double-end profiler Homag type FLO22 Specifications: • Workpiece width: min. approx. 190 mm - max. 2600 mm • Workpiece thickness (mm): 8 - 90 • Workpiece protrusion adjustable (mm): 10 - 120 • Working height from the ground (mm): 905 • Feed rate infinitely variable (m/min.): 5 - 25 • Magnetic braking of the feed motor • Max. adjustment speed (m/min.): 3 • Transport chain with cams: cam spacing 900 mm, cam height adjustable up to 20 mm 3 motors per side: • 1st scorer: 1.5 kW controlled • 2nd flaker: 4.5 kW, swivel 15° • 3rd milling motor: 4.5 kW, electro-pneumatic control for case milling, swivel range 90° • Free space: for setting up a standard milling unit

Sales on behalf of a customer, further data on request

SPECIFICATIONS Model 6 Spindles Workpiece length min. (without gap) mm 300 Workpiece length min. (with gap) mm 800 Workpiece width mm 10 – 250 Workpiece thickness mm 10 – 160 | 5 – 160 Spindle speed 1st spindle 1/min 4,000 – 6,000 (var) Spindle speed from 2nd spindle 1/min 4,000 – 8,000 (var) Spindle diameter mm / inch 40 mm | 50 mm | 1-1/2 inch | 1-13/16 inches Power spindle motor kW 5.5 | 7.5 | 11 | 15 | 18,5 Radial Spindle Positioning, Target/Actual Display and Hand Crank | automatic Axial Spindle Positioning, Target/Actual Display and Hand Crank | automatic

Max workpiece length: 5200 mm – for tool Ø 25: 5375 mm Max. workpiece width: 1400 mm – for tools Ø 25 mm: 1550 mm Workpiece thickness max. 300 mm up to 60 mm with standard clamping device Console table: consoles with front stop 8 units Rear gauge (fixed) 4 units Lift Rails Console length 1340 mm Side stops left 2 units – right 2 units Suction cups 160 x 115 x 100 mm 16 units Suction cups 125 x 75 x 100 mm 8 units Vacuum pump 140 m3/h Modern control system from a WINDOWS computer WINDOWS XP operating system Industrial PC 17-inch flat screen Connecting to the Ethernet network WOODWOP Program Voltage 400 V 50/60 HZ Additional vacuum pump 100 m3/h Chip conveyor belt 13-pin drill head 9 verticals 6 X-Drilling Spindles 4 Y-Drill Spindles 4 horizontal pins 2 X-pins 2 Y-pins Main spindle 11kW HSK F63 Liquid cooling 1000/24000 rpm Tool Ø 1 ...

Short description of basic equipment: - Console clamping table K - HOMATIC control PC 83 with Windows operation - Main spindle 12 kW - Plate changer 18-fold - Unit interface for changing machining units into the main spindle, with integrated pneumatic supply and C-axis drive - WoodWOP 5.0 programming system - Laser positioning aid for vacuum clamps Workpiece dimensions: - Workpiece length max. 4500 mm - Workpiece width max. 1300 mm for milling with tool diameter 20 mm max. 1150 mm for all units - Workpiece thickness Max. 60 mm with standard clamp max. 200 mm with clamping templates (customer's side) Other features: - 4 x lifting rail with sliding coating, visible on the console - 2 x side and longitudinal stop pins - Chip conveyor belt - Drill head 12 spindles, vertical - Ethernet network connection All information is subject to actual equipment

Power Control PC85, Woodwop, ATC 12-fold, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum assignment, edge height max. 65 mm, chip and offcut disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled

: 0,4 - 3 mm Feed speed: 8 - 20, Variabel m/min. Workpiece thickness max.: 60 mm workpiece width - max.: 60 mm : Ja Premilling unit: Ja : Ja : Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Groove milling aggregate: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1250mm, working height: 100mm, with scoring and milling aggregate, with control cabinet, without documentation, manufacturer unknown, either Homag or Bäuerle.

Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm.

Travel Z: 535mm, travel speed X/Y/Z: 60m/60m/30m/min, max. workpiece dimensions X/Y/Z: 4175mm/1730mm/300mm. Main spindle: power: 18.5kW, speed: 24000rpm, max. tool diameter: 200mm, max. tool length: 200mm, max. tool weight: 6kg. Drill diameter: 35mm, speed: 6000rpm, power: 4kW, projection stroke: 50mm, swivel: 100°, cross-cut saw diameter: 180mm, number of spindles: 4, vacuum pump capacity: 100m³/h. Documentation available. On-site inspection is possible.

A Homag CNC 3-axis woodworking center is available. Travel X/Y/Z: 4800mm/1200mm/410mm, rapid traverse X/Y/Z: 80m/80m/30m/min, main spindle power: 12kW, tool places: 17, including 9 carriages, separate control cabinet, Gedore workshop trolley with some spare parts, Siemens vacuum pump and Gardner Denver vacuum pump. Documentation available. On-site inspection is possible.

Buffing unit - 1 motor

Oscillating buffing unit HOMAG

Sanding unit Make: HOMAG Type: PS10

Exchange units for contour milling HOMAG

CNC machining center Homag type BMG 511/60/12/F/AP including extensive tools, with 5-axis spindle, two machining stations and reinforced vacuum pump., tool magazine: 30 speed, derailleur, projection laser: Yes, software: WoodWop 6.1, Further data: On demand, main spindle: 5-axle / 12 kW / Drive 5C+, X axis: max. 6,000 mm or 2 x 2,375 mm// 60 m/min, Y-axis: max. 1,550 mm // 60 m/min, Z-axis: max. 600 mm // 25 m/min

Manufacturer: KEB Homag Umrichter, Serial number: 07.F0.R01-1228, was installed in machine: Homag Maschine, Production number: 95150305/129518, Frequency converter: yes, Power Output: 750, FREE TEXT: 750 W 2/4 50/60 Hz,

Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996

Manufacturer: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,

Manufacturer: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,

Manufacturer: Homag Synchron Aggregateverstellspindel, Gear: 1512-2-8213<CRLF>AB04J22.04, Gear: 1512-2-8213<CRLF>AB04J22.04,

Manufacturer: Umrichter Homag KEB, Model: für Weeke Frässpindel, Serial number: 97410930-0316782, mH/Hz: 16000, Output PpK= kW: 11 kw, Used: yes,

Manufacturer: Homag, Type: Rechnerkarte, Model: CPU-Karte 70 BO 10 MHz 2 RAM, Serial number: 4-086-05-194,

Manufacturer: Homag, Spare part from machine: Homag KL 79, Edge sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 450, Installation width mm: 350, Max. roller diameter: 80, Speed rpm: 1450, Pneumatically controlled: yes, pneumatisch gesteuert : yes, Sanding belt hight: 150, Sanding belt width max mm: 150 X 2100, Sanding belt length max mm: 2100, Main engine kW: 0,5, 2 belt speeds: 1, Belt clamping pneumatically: yes, Oscillation: yes,

Manufacturer: Homag, Type: Power FL 14/10/12/CF, Year: 2004, Control: yes, Number of milling spindles: 4, Required space L x W x H mm: 8400x4750, Year :2004

Manufacturer: Homag Anschlaglineal gesteuert, Type: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,

Manufacturer: Homag Nutsäge mit Winkelgetriebe, Type: 4-00570, Saw blade quantity: 1, Tool diameter mm: ca.160, Used: yes, Anschlussspindel mm: HSk 63, Available: sofort, FREE TEXT: HSK 63 ,

Manufacturer: Homag Druckzone 6-fach, Spare part from machine: KL 79, Type: Formsttrecke, Year: ca.95, Rollers: yes, Free-standing: yes, Roller size: ca 40 mm, Gluing part right side: yes, Year :ca.95

Manufacturer: Homag, Type: Transportband, Year: 1997, Working length mm: ca.1400, Working widht mm: ca.1300, Total hight mm: 950, Engine power kW: 0,5, Feeding speed max m/min: geschätzt 10 m/min, Feeding speed continous adjustable: nur über Umrichter, Year :1997

Manufacturer: Homag CPU SPS CPU, Type: Homatic, Serial number: 2-083-01-5057, Systemconfiguration: 2-083-01-5020 REV02, Year: 11/94, Year :11/94

Manufacturer: Homag Ausgangskarte 24 Volt, Type: Homatic, Model: Ausgangskarte 16 24 Volt, Serial number: 2-083-01-5408,

Manufacturer: Homag, Type: Homatic Streckenprozzessor , Serial number: 2-083-02-7024,

Manufacturer: Homag CPU, Type: CPU HC020 SPS II, Serial number: 2-083-01-50-60, Systemconfiguration: V:4.66a,

Manufacturer: Homag, Type: Homatic, Model: Eingangskarte 3224 Volt, Serial number: 2-083-01-5105, Year: 93, Year :93

Manufacturer: Homag CPU SPS-II, Type: 1 MB RAM und PC Cobtroller, Serial number: 2-083-01-5043, Year: 93, Year :93

Manufacturer: Homag CPU , Type: SPS II 12 MHz 1MB RAM, Serial number: 2-083-01-5044,

Manufacturer: Homag CPU SPS-II, Type: Homatic, Model: PC-Controller, Serial number: 2-083-01-5053,

Manufacturer: ELTEC Homag IPC-2, Type: Homatic, Model: Netzwerkkarte, Serial number: 2-083-03-0099, Systemconfiguration: IPCA-200/1, Serial number: Traegerkarte,

Manufacturer: Homag VME Interfacekarte, Type: Homatic, Serial number: 2-083-01-5423, Systemconfiguration: 2-083-01-5093, Serial number: f.HC010 Rev.4,

Manufacturer: Eltec Homag, Type: Homatic, Model: Seco 6xRS232 VME Bus IRQ2, Serial number: 2-083-03-0202,

Manufacturer: Homag, Type: F5, Model: 15.F5.CBE-YA00, Serial number: 4-008-39-1121 V3.2,

Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,

Manufacturer: Homag<CRLF>, Year: ca.1995, Type: SEW, Motor mit Getriebe: Motor mit Gertriebe, Getriebe: für Vorschubkette, aus Maschine: KL 79, Motor mit Getriebe: Motor mit Gertriebe, Getriebe: für Vorschubkette, Year :ca.1995

Manufacturer: Homag, Type: Ritzsäge Nachschwenkeibrichtung für links und rechts, From machine: Homag FPL, Shaft dimensions L x D mm: 1200,

Manufacturer: Homag Transportrollgang mit angetriebenen Anschlagriemen, Year: ca.2005, Control: yes, Working length mm: 3500, Working widht mm: 2050, Engine power kW: 1,5, Feeding speed min-max m/min: 10-40, Durchmesser Rolle mm: 50, Rollenmittenabstand: 70, angetrieben über Zahnriemen: Flachriemen, Anschlaglineal verstellbar: Transportriemen, Anschlagkante Höhenverstellbar: yes, Schrägstellung der Rollen (Durchgehend): yes, Beschichtung: Gummi, Own controller: yes, Total hight mm: 980 +-, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :ca.2005