We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
An edge banding machine is being sold. Machine works perfectly. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Banding thickness max 5 mm Plate thickness max 40 mm Thickness of roll material max 3 mm Workpiece length min 180 mm Workpiece width min. 60 mm Feed max. 8 m/min Glue system granules glue basin bottom Cross-cut saw unit 2 motors Weight approx. 660 kg The machine must be picked up with a tail lift or drop-down trailer, as there is only one pallet truck. Price is 3000 net plus VAT All information without guarantee Article location Nuremberg
used
BIESSE Stream A / 6.0 Single-sided edge banding machine for attaching various edge materials (Melamine, PVC, ABS, Veneer, Wood) - Year of construction 2018 - Including air cushion table - Immediately available - Including dismantling and loading - Including additional replacement glue basins
used
Used machine Without pre-milling Edge Caps Front/Rear Milling Rounding Top/Bottom Milling Rounds Front/Rear Scraper Blade: Top/Bottom Polishing Top/Bottom
used
Edge banding machine Brandt Highflex KDF 220 with jointing, corner copying and two Scraper blades. Very well automated. A video of the running machine can be sent on request. Edge thickness roll approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height approx. 10 - 60mm Feed speed approx. 10m/min Noise protection hood Pull-out workpiece support Suction connection 1x120mm, 1x100mm, 3x80mm Easy-touch EC+ control for easy operation of the machine 4 programs can be saved. Machine in high-flex design, highly automated, change of edge from thin edge to thick edge via programs Aggregates: Extended inlet zone Chain conveyor central lubrication, pneumatic manual Quick-change glue basin device, currently one glue basin available Top pressure manual adjustment, PU rollers Infeed ruler manual adjustment with SIKO counter on chip removal Joint milling with slide ...
used
For sale is a Brandt edge banding machine bj. 2010 The machine was serviced by the Brandt company only 3 months ago. No defective available. For sale due to new acquisition. Special equipment in the pictures. Loading facilities available Price is net VAT
used
Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passage. OVERVIEW OF THE UNIT CONFIGURATION: JOINING MILLING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A8 with workpiece preheating, fill level control, Quickmelt application unit, magazine and motorized pressure zone CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT MULTI-STAGE MILLING UNIT MS 40 COUNTER ROTATION PNEUMATIC 2-POINT ADJUSTMENT SHAPE MILLING UNIT 1 X 0.35 KW WD 60; also for construction floors PNEUM. 2-POINT ADJUSTMENT RADIUS/CHAMFER MZ 40 MULTI-STAGE SCRAPER UNIT GLUE JOINT SCRAPER BLADE BUFFING UNIT Top pressure: PU rollers instead of standard rollers Release agent spray unit workpiece, leading and trailing edges; edge material Power Control PC 20+ Ele ...
used
Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passage. OVERVIEW OF THE UNIT CONFIGURATION: Electronic control POWER CONTROL PC 20+ PU top pressure rollers instead of rubber rollers Optimization of workpiece spacing Inlet ruler extension by 300mm with additional laminate overhang device JOINING MILLING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A12 with automatic edge retraction – Quickmelt APPLICATION UNIT – Standard application unit replaceable PU glue – Pressure zone with motorized adjustment QA 45 EVA application unit for all types of adhesives and quick changeovers CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0.35 KW PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT CAPS PRE-MILLING UNIT 2 X 0.55 KW counter-rotation – with PNEU ...
used
! the regression shown in the photos is not included Equipment: - Electronics control power control PC 20+ - PU top pressure rollers - Motorized height adjustment upper pressure - Hood interior lighting - Infeed ruler adjustable and extended by program - Program adjustment pressure zone - Quickmelt application unit - Autom. Edge retraction - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, with pneum. 2-point adjustment - Pre-milling unit 2 x 0.55 kW - Milling unit 2 x 0.55 kW, with program Adjustment to edge thickness and multi-roller scanning - Shape milling unit top+bottom, 2 x 0.35 kW - Scraper blade with quick-change heads with additional device for pointed workpieces - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit 2 x 0.18 kW - Interface electr./mech. for Ligmatech ZHR01 ...
used
Equipment: - Extended inlet ruler - Joining milling unit 2 x 2.2 KW 200 Hz - Gluing unit A8 - Cross-cut unit chamfer/straight 2 x 0.18 KW - Pneumatic adjustment caps chamfer/straight - Milling unit 2 x 0.55 KW counter-rotation with multiple roller probing - Pneumatic 2-point adjustment - Program adjustment side buttons - Shape milling unit 1 x 0.35 KW WD 40 - Pneum. 2-point adjustment radius/chamfer - Profile scraper with quick-change heads and special keypad - Pneumatic adjustment of the scraper blade - Glue joint scraper blade - Buffing unit Technical data: - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm - At workpiece thickness 41-60mm ¦ 150 mm Depending on the workpiece length - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 8 - 60 mm - Edge height max.= workpiece height¦ + 6 mm - Edge m ...
used
Edge banding machine Brandt Ambition 1120 c with 2 glue basins, joints, corner copying and two Scraper blades. Good entry-level machine with extensive equipment. A video of the running machine can be sent on request. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 10 - 40mm Feed speed approx. 8m/min Noise protection hood Pull-out workpiece support Extraction connection 1x100mm, 4x80mm including the pictured piping to 200mm Easy-touch control with color screen for easy operation of the machine 10 programs can be saved Aggregates: Top pressure manual adjustment with crank and SIKO counter Infeed ruler manual adjustment with SIKO counter Joint milling with slide milling, sharpened A total of 2 interchangeable glue basins for a quick colour change from white to transparent Gluing part with automatic edge retraction for rolls up to 3mm Pressur ...
used
Aggregate equipment: - Joining milling unit 2 x 2.2 Kw 200 Hz - Gluing unit - Cross-cut unit chamfer/straight 2 x 0.35 Kw - Milling unit 2 x 0.55 Kw counter rotation - Grooving unit 1 x 3.5 Kw - Shape milling unit 2 x 0.35 Kw Wd 60 - Profile scraper blade with quick-change heads (R 1 and 2 mm) - Glue joint scraper blade - Buffing unit Other features: - Extended inlet ruler with program adjustment - Program adjustment pressure zone - Motorized adjustment upper pressure - PU top pressure rollers - Automatic edge retraction - Quickmelt application unit - Pneumatic 2-point adjustment caps - Pneumatic adjustment of the scraper blade - Program adjustment side buttons - Pneumatic 2-point adjustment, vertical sensing rollers - Release agent spray unit workpiece - Lubricant spray unit edge material - Cleaning agent spray unit - Axis adjustment for groove milling machi ...
used
EBM edge banding machine KDP 111 SLK - built in 1991 -11.5 kW motor, banding from 0.8-5 mm, verst. Cross-cut knife (roll separation up to 3 mm) Rapid heating basin, HF cross-cut sawing unit, HF flush milling unit, HF chamfer or Radius milling unit, pull-out workpiece support, heated inlet ruler complete with 2-part sound insulation hood and central extraction - Good condition - Length approx. 3,160 mm Depth with roller plate approx. 1,230 mm Workpiece width, min. 90 mm Workpiece thickness, min. 10 mm Workpiece thickness, max. 50 mm Workpiece length, min. 260 mm -Operating instructions available
used
Edge banding machine Edge banding EBM Type: KDP 112 SLK Year of Make: 2000 Gluing over hot-melt adhesive basins Plastic edges and veneers 0.4 to 1mm PVC edges and thick veneers 1.0 - 3.0 mm Solid edges up to 5 mm Flush saws with cross-cut unit Flush milling at the top and bottom Dimensions approx. 2.86 x 1.32 x 1.3 m Weight approx. 550 kg Total power requirement approx. 10 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are indicative. Depending on the distance, these may vary. The item offered is offered with differential taxation. The sales price shown is the gross fina ...
used
: 0,4 - 3 mmWorkingpiece thickness from to: 10 - 45 mmTotal length: 3.200 mmFeed speed: 8 m/min.total power requirement: 5,5 kwWeight: 450 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Flat scraper: Ja Number of working hours: ca. 1.288 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: 0,4 -3 mmWorkingpiece thickness from to: 10 - 45 mmTotal length: 3.200 mmtotal power requirement: 5,5 kwWeight: 450 kgfeed: 8 m/minPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Flat scraper: Ja Number of working hours: ca. 439 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Edge banding machine with joining milling machine (incl. DIA tool), with PLC control (incl. touchscreen) with hot-melt adhesive specification on the workpiece for edge material up to 3 mm: maintenance-free, coated glue basin with alternating tank preparation, HF cross-cut sawing station (approx. 16,000 rpm) for front and rear edge protrusion, HF milling station (approx. 16,000 rpm)with interchangeable plate milling cutter (combination design), Fine adjustment of the milling machine from the operator's side (Hebrock system), Corner round milling machine (minimum workpiece length 300 mm, Hoa0Tgpbz max. workpiece thickness 40mm), surface scraper blade incl. pneumatic excavation, robust chain drive, Double roller top pressure, aggregate viewing window of Machine rear and operator side, extendable Workpiece support, feed rate approx. 10 m/min., workpiece thickness 60 mm, incl. 1x al ...
used
Hebrock K34 Edge thickness up to 8mm PLC Screen Control with 15" Touch Screen Pre-milling unit for attaching in front of the gluing part (3mm) Glue basin with alternating basin and adhesive spout device Edge height max. 60 mm Cross-cut unit Milling unit flush/radii/chamfer milling Corner Round Unit Radi/Chamfers Multiradius scraper blade /R1/R2) Nesting Wing Scraper Release agent spraying device Year of Build 2023, 52 Hours Machine is MINT in TOP CONDITION From joinery liquidation / retirement from the carpentry workshop
used
Hebrock edge banding machine K36 with extraction connection Technical data: • Version for R1 (1 mm) • PLC control (incl. touchscreen) • Hot melt adhesive specification on the workpiece for edge material up to 3 mm joining milling machine (incl. DIA tool) • Up to 3 mm milling depth • Maintenance-free coated glue basin with alternating basin pre-installation • Incl. adhesive run-out device • HF cross-cut saw station (approx. 16,000 rpm) • HF milling station (approx. 16,000 rpm) • With pneumatic milling adjustment and interchangeable insert milling cutter (combined version) • Corner round milling machine • Radius scraper blade • Wing scraper blade (incl. pneum. Excavation device) • Cleaning station • Robust chain drive • Ball-bearing double roller top pressure • Unit viewing window from the rear and operating side of the machine • S ...
used
Electricity connection 400V / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, rolls 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Printing unit 1914 Cross-cut unit 1976 Milling unit flush 1942 Milling unit Radius R2 1943 Ziehklinge 1927 Buffing unit 1944
used
Wood Her Perfect 1422 K + PU Heavy version up to 20 mm edge thickness Full car. Roller magazine - Chop shears Full car. Edge magazine for striped fabric CARTRIDGES + PU gluing station Flush caps Multifunction milling unit, flush - chamfer - radius milling with mech. Digital Setting Soundproof booth CE version Machine is FUNCTIONAL TESTED in VERY GOOD CONDITION from stock Lieboch
used
Holz Her Sprint 1312 FÜ + PU heavy version - edge thickness 0.4 - 12 mm PLC Screen Control Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station cartridges + PU gluing car. Tactile nozzle Workpiece height 6-55 mm Cross-cut unit for roll and strip goods up to 12 mm edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling 12 mm, radius milling - chamfer milling - 15° MOT - 4 axis Scraper unit for chamfers and radii with 2 pneum scraper carriers. Pneumatic engagement and disengagement Surface Scraper Unit - Finish Spraying Device - PU Machine in TOP CONDITION from stock Lieboch
used
Wood Her Sprint 1329 Black Edition Heavy version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, power PC color screen Motorized, positioning-controlled bridge height adjustment Pre-milling unit for attaching in front of the gluing station autom. Inlet ruler 1350 mm MOT Fully automatic edge magazine for roll and strip goods MOT GLU-JET Cartridge Glue Application Station - Granu + PU Gluing, Thin Film Technology Edge height max. 60 mm Glue height adjustment / tactile nozzle Printed work 1913 mot. Motor-pneumatic NC servo axis Cross-cut unit for roll and strip goods up to 15 mm edge thickness with electro-pneumatic conversion of 0-10° bevel of the cross-cut saws Multifunction milling unit MOT 6 - NC control axes: Flush milling 8 mm (15 mm) Radius milling Bevel milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners wit ...
used
Top control panel Edge Feeder 1902 Glue application station 1906 Chopping shears 1902 Printed work 1816 Cross-cut unit 1918 Milling unit 1942M Rounding scraper blade 1929 Shape milling unit 1983 Wing scraper blade 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Length approx. 5300 mm
used
Wood Her STREAMER 1057 FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm Car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Spraying Device - PU Machine with all machining tools Machine is WORKSHOP TESTED in TOP CONDITION
used
Wood Her STREAMER 1057 XL FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Scanning nozzle Workpiece height 6-60 mm car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Buffing unit Spraying device in the inlet and outlet area as well as PU Machine with all machining tools Machine is WORKSHOP TESTED First ...
used
Machine YOC 1992 Feed speed 8+16 m Solid wood edges, width up to 13 mm Rolls up to 3 mm Edge height max. 45 mm Aggregates: PE Hot Melt Glue Cartridge System Type 1906 1.9 kW Printing unit 1914 1 + 3 rolls Caps 1978, swivel 0-15 degrees Flush milling machineType 1942 2 x 0.6 kW Straight / chamfer up to 15 degrees Radius milling type 1943 2 x 0.6 kW Bevel 45 degrees Radius scraper blade type 1927 Buffing unit Length approx. 5,030 mm Width 1,760/1,605 mm Weight approx. 1,300 kg
used
Automatic edgebander machine HOLZHER STREAMER 1057 second hand machine working condition : Excellent , like new declaration of CE-conformity conformity marking CE mark with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , solid wood max.mm.6 for furniture, furnishings, kitchens, bathrooms, doors, panels and various Control HOLZ-HER KPL volt. 400/50 technical details: min. height of gluing panel mm.8 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 min. panel width mm.65 min. panel length mm.160 max.feed speed: 10 mt./min. support for large panels soundproof cabin glue system cartridge composition machine . units : 1.Magazine for single strips HOLZ-HER Edge magazine 1903 2.Premilling unit . HOLZ-HER Premilling unit FG 201 3.Trimming saw 2 motors . HOLZ-HER Trimming saw 1918 PNEU ...
used
Technical data: - Working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar - Machine length ¦ 4305 mm - Constant feed rate 8 m/min - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm Depending on the workpiece length - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 40 mm - Edge height max. = workpiece height ¦ + 5 mm - Edge material roll ¦ 0.3 - 3 mm - Edge cross-section max. - For PVC ¦ 135 mm² - For veneer ¦ 100 mm² - Roll diameter max. ¦ 830 mm - Strip edge material ¦ 0.4-3.0 mm - Edge cross-section max. - For strips ¦ 135 mm² Equipment: - Inlet ruler manually adjustable - Workpiece support ball sleeve - Manual chain conveyor central lubrication - Top roller pressure with toothed rubber rollers - Height adjustment manually - Joining milling unit 2x0.7 kW (40 mm milling cu ...
used
: 0,4 - 3 mmFeed speed: 8 - 20, Variabel m/min.Workpiece thickness max.: 60 mmworkpiece width - max.: 60 mm: Ja Premilling unit: Ja : Ja : Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Groove milling aggregate: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Sales on behalf of a customer, further data on request
used
Used HOMAG EDGETEQ S-240 HIGHFLEX 1230 edge banding machine, built in 2019 with BARBARIC RETURN RTS 04 L COMPACT return system, year of manufacture 2022 Technical data edge banding machine: - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm - At workpiece thickness 41-60mm ¦ 150 mm - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 60 mm - Edge height max. = workpiece height ¦ + 5 mm - Edge material roll ¦ 0.4 - 3 mm - Edge cross-section max. - For PVC ¦ 135 mm² - For veneer ¦ 100 mm² - Roll diameter max. ¦ 830 mm - Strip edge material ¦ 0.4-6.0 mm - Edge cross-section max. - For strips ¦ 165 mm² - Feed speed ¦ constant 11m/min - Working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar - Overall length ¦ 4740 mm Equipment edge banding machine: - Adjustable inlet ru ...
used
Equipment: - Joining milling unit - Gluing part with pressure zone - Cross-cut unit - Radius/chamfer/flush milling machine - Shape milling unit (2-motor) - Profile scraper blade - Wing scraper blade - Buffing unit - Release agent spray unit - Detergent spray unit Technical data: Workpiece: Workpiece thickness min. 8 mm (or 12 mm with profile scraper), max. 60 mm Workpiece length min. 150 mm Workpiece width min. 150/65 mm with workpiece thickness 25 mm Smallest workpiece 65 x 300 mm / 150 x 300 x 19 mm Edge material: Edge thickness 0.3 - 3 mm Edge height 12 - 65 mm Edge length min. 200 mm Max. edge cross-section: Roll 150 - 180 mm, strip 480 mm Machine data: Length 6,630 mm Width 2,050 mm (hoods open) Height 1,700 mm (hoods closed) Min. distance to the wall: 1,000 mm (aggregate side) Weight: approx. 3000 kg Upper edge of chain conveyor 900-930 mm Workpiec ...
used
IMA COMBIMA K/II/R75/760/V/R3 edge banding machine was built in 2000 in Germany by IMA-Maschinenfabriken Klessmann GmbH. The machine is used in woodworking workshops and furniture manufacturing companies, where it is used for the precise edge-banding of components made from chipboard, MDF and laminated materials. The durable bond between the board edge and the edging contributes to the aesthetic appearance of the finished components, whilst also increasing their resistance to mechanical damage and moisture. The edge banding process begins with heating the adhesive to the correct temperature, and then applying it evenly to the edge of the board. At the same time, the edging is precisely pressed against the surface with rollers. Maintaining the correct temperature and constant pressure ensures the adhesive bonds evenly along the entire length of the component, guaranteeing a high-qualit ...
used
automatic edgebander machine OCMAC SHF 800 second hand machine machine ideal for solid wood edges up to 30 mm thick with 4 sanding units machine composition: 1.gluing group with glue tank 2.pressure rollers 3.edge feeder 4. Dual-motor end trimming units 5. Dual-motor trimming units 6. Dual-motor edge trimming units 7. Spindle moulder n.4 sanding units cabin machine machine length approx. 900 cm
used
TECHNICAL DATA: Composition: Bonding unit Edging unit Cross-cut unit
new
Demonstration and trade fair machine. including suction line. Equipment: European safety regulations (sign C.E.) olimpic 500 - Version HP T-ER2 (40) Volt 400 EU Frequency 50 Hz Control console eye-S (control panel) Human-Machine Surface Software (HMI) Maestro active edge Maestro connect: Preparation without gateway for subsequent installation Fine milling and radius pulling blade unit radius = 1 mm Fine milling and radius drawing blade unit radius = 2 mm Electronic positioning of the upper pressure beams Spacers on the inlet ruler Kit SAV€NERGY Interior lighting of the cab and the gluing area Nesting sensing rollers Release Agent Spray Unit AAR Sprayer for finishing the edge Sprayer for sensitive edges Joining unit RT-V1 EASY SIZE device Glue unit VC-VM Ceramic lamp with infrared rays Electronic positioning of the pres ...
used
SCM Olimpic K360 - Single-sided edge banding machine - Year of construction 2016 - Immediately available - Incl. replacement glue basin - Top condition
used
SCM Olimpic K360 - Single-sided edge banding machine - Year of construction 2021 - Immediately available - Top condition
used
M.Nr. AH/0002544 Ref: 103615 Year of Make: 2020 Motor data: 380 V - 50 Hz - 26 A Top control panel Pre-milling unit Glue basin - PU suitable - with spout Cross-cut station Pressure zone double sawing unit Milling unit top/bottom rounding Corner Copying Wing Scraper Radius Scraper Spraying device Buff Panel thickness: 8 - 50 mm Roll separation: 0.4 - 3 mm Feed rate approx.: 11 m/min Compressed air approx.: 8 - 10 bar, Central suction nozzle on the distributor: 1 x 200 mm Extendable support rail Weight approx.: 1200 kg External dimensions L/D/H approx.: 4600/1400/1700 mm Inspection and delivery date by arrangement. Prior sale and errors excepted. The price includes VAT! Product safety SCM Group Deutschland GmbH Woodworking Machinery Seilerstraße 2, 72622 Nürtingen 07022 92540
used
Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue
used
Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue
Condition The machine has been used little and is in a well-maintained, fully functional condition. It is immediately ready for use. Sightseeing and pick-up A viewing and a test run are possible by appointment. Truck access available. Loading by forklift on pallet possible. A forwarding company is located in the immediate vicinity and can be easily commissioned with the collection if necessary. Technical data Suitable for edge thicknesses from 0.4 to 3 mm Edge height: 15 to 55 mm Workpiece height: 10 to 50 mm Minimum workpiece width: 80 mm Minimum workpiece length: 100 mm Feed motor: 1.1 kW Feed speed: 12 m/min Control panel at the machine inlet at eye level Chain feed Support plate for PVC and ABS edging Pressure zone with pneumatically driven main pressure roller and holding pressure rollers Centrally adjustable top pressure Teflon-coated glue ...