Short description of the equipment: - Console clamping table K - 4 lifting rails on the consoles - POWER CONTROL - Control with PC 85 - Main spindle 14.5 kW vector-controlled, water-cooled - Aggregate interface main spindle, incl. pneum interface and C-axis swivel drive (torque entrainment / 3-point support) - Plate changer 18-fold - 1 pickup space for Castor unit - Drill head 17 vertical spindles, 11 spindles in the X direction, 7 spindles in the Y direction - Laser positioning aid - Pendulum machining Specifications: - Workpiece length max. 4500 mm - Workpiece width max. 1300 mm for milling with tool Ø 20 mm - max. 1150 mm for all units Workpieces larger than 1150 mm must be attached to the longitudinal stops at the rear - Workpiece thickness max. 60 mm with standard clamp, max. 200 mm with clamping templates (customer's side) - Total extraction capacity 5,000 m ...
Key data: 4200 mm
Power Control PC85, Woodwop, ATC 12-fold, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum assignment, edge height max. 65 mm, chip and offcut disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled
Inv. Num. : 8343 Type: HPP 300 profiLine Producer: HOMAG Created: 2017 Parameters: Cutting length: 3200 mm Maximum format size: 3200 x 3100 mm Equipment: NC control
Specifications - Press pressure (fixed): - Vertical: max. 15 kN - Horizontal: max. 15 kN - Positioning speed: - Rapid traverse: 50 mm/s - Creep trajectory: 25 mm/s - Working height: 300 mm - Weight: approx. 2.2 t - Pneumatics: none - Transport interface: no -Floor space: - Length: 4,000 mm - Depth: 750 mm - Height: 2,300 mm - Required room height: 2,500 mm Body dimensions: - Length: 250...2,500 mm - Depth: 250 to 700 mm - Height: 150...1,400 mm Power supply - Operating voltage: 380-480 V, 50/60 Hz - Control voltage: 24 V DC according to VDE - Connected load: approx. 4 kW - Not suitable for connection to an RCD. - Prescribed ambient temperature: +5 ... +35 degrees Celsius Flooring requirements - Concrete quality C16/20 XC1 - Tensile / compressive strength - Minimum thickness: 150 mm Certification Machine with CE mark in accordance with EC Machinery ...
for the production of furniture parts made of wood or wood-like materials WORKPIECE DIMENSIONS Length: min. 20 mm max. 1,250 mm Width: min. 20 mm max. 800 mm Note: The workpiece width should always be larger in proportion to the workpiece thickness. Thickness: max. 80 mm, min. 10 mm Active center stop: length max. 600 mm PLACEMENT - 1 vertical drilling gear with 3 individually retrievable spindles, spindle base: 32 mm Adjustment range in Y-direction: 0 - 50 mm (with a drill diameter of 20 mm) Max. drill diameter: 35 mm - 1 horizontal drilling gearbox with 3 individually retrievable spindles, spindle base: 32 mm Adjustment range in Z-direction: -5 - 65 mm - 1 dowel unit (at a distance of 32 mm from the drilling spindle) - 1 glue unit with adjustable glue quantity - Glue flow monitoring - Cleaning device for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm ...
Key data: 6 , 250 mm, 160 mm
SPECIFICATIONS Model 6 Spindles Workpiece length min. (without gap) mm 300 Workpiece length min. (with gap) mm 800 Workpiece width mm 10 – 250 Workpiece thickness mm 10 – 160 | 5 – 160 Spindle speed 1st spindle 1/min 4,000 – 6,000 (var) Spindle speed from 2nd spindle 1/min 4,000 – 8,000 (var) Spindle diameter mm / inch 40 mm | 50 mm | 1-1/2 inch | 1-13/16 inches Power spindle motor kW 5.5 | 7.5 | 11 | 15 | 18,5 Radial Spindle Positioning, Target/Actual Display and Hand Crank | automatic Axial Spindle Positioning, Target/Actual Display and Hand Crank | automatic
Max workpiece length: 5200 mm – for tool Ø 25: 5375 mm Max. workpiece width: 1400 mm – for tools Ø 25 mm: 1550 mm Workpiece thickness max. 300 mm up to 60 mm with standard clamping device Console table: consoles with front stop 8 units Rear gauge (fixed) 4 units Lift Rails Console length 1340 mm Side stops left 2 units – right 2 units Suction cups 160 x 115 x 100 mm 16 units Suction cups 125 x 75 x 100 mm 8 units Vacuum pump 140 m3/h Modern control system from a WINDOWS computer WINDOWS XP operating system Industrial PC 17-inch flat screen Connecting to the Ethernet network WOODWOP Program Voltage 400 V 50/60 HZ Additional vacuum pump 100 m3/h Chip conveyor belt 13-pin drill head 9 verticals 6 X-Drilling Spindles 4 Y-Drill Spindles 4 horizontal pins 2 X-pins 2 Y-pins Main spindle 11kW HSK F63 Liquid cooling 1000/24000 rpm Tool Ø 1 ...
Double-end profiler Homag type FLO22 Specifications: • Workpiece width: min. approx. 190 mm - max. 2600 mm • Workpiece thickness (mm): 8 - 90 • Workpiece protrusion adjustable (mm): 10 - 120 • Working height from the ground (mm): 905 • Feed rate infinitely variable (m/min.): 5 - 25 • Magnetic braking of the feed motor • Max. adjustment speed (m/min.): 3 • Transport chain with cams: cam spacing 900 mm, cam height adjustable up to 20 mm 3 motors per side: • 1st scorer: 1.5 kW controlled • 2nd flaker: 4.5 kW, swivel 15° • 3rd milling motor: 4.5 kW, electro-pneumatic control for case milling, swivel range 90° • Free space: for setting up a standard milling unit
Sales on behalf of a customer, further data on request
Short description of basic equipment: - Console clamping table K - HOMATIC control PC 83 with Windows operation - Main spindle 12 kW - Plate changer 18-fold - Unit interface for changing machining units into the main spindle, with integrated pneumatic supply and C-axis drive - WoodWOP 5.0 programming system - Laser positioning aid for vacuum clamps Workpiece dimensions: - Workpiece length max. 4500 mm - Workpiece width max. 1300 mm for milling with tool diameter 20 mm max. 1150 mm for all units - Workpiece thickness Max. 60 mm with standard clamp max. 200 mm with clamping templates (customer's side) Other features: - 4 x lifting rail with sliding coating, visible on the console - 2 x side and longitudinal stop pins - Chip conveyor belt - Drill head 12 spindles, vertical - Ethernet network connection All information is subject to actual equipment
Key data: 4200 mm, 1500 mm
Power Control PC85, Woodwop, ATC 12-fold, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum assignment, edge height max. 65 mm, chip and offcut disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled
Key data: 4200 mm, 1500 mm
Power Control PC85, Woodwop, ATC 12-speed, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum occupancy, edge height max. 65 mm, chip and remnant disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled
Key data: 20 mm, 60 mm, 8365 mm
I am selling a fully equipped edge banding machine HOMAG EDGETEQ S-500 KAL370 Ambition 2484, built in 2019: Configuration: Input stop servo-motor adjustable Manually adjustable joint milling Edge banding with preheating tanks 2 pcs. Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling top + bottom pneumatically adjustable Round unit 4-motor servo motor adjustable R2 / second set R1 included Swivel groove saw unit Radius scraper blade Multiradius servo motor adjustable Scraper blade surface can be pneumatically adjusted Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 8-60mm Edge material thickness 0.4-12 (20)mm Feed speed 16 to 25m/min. Overall length including feed plate 8365mm Mileage status 833,000 meters. Input appar ...
CNC vertical machining center DRILLTEC Type: V-200 Optimat BHX055 Year of construction: 2021 only 564 operating hours Workpiece length 200 - 3050 mm incl. roller conveyor Workpiece width 70 – 850 mm Workpiece thickness 12 – 60 mm Workpiece weight max. 35 kg Speed of axes X/Y 50 m/min., Z 15 m/min. Vertical Drill Gear V13/32 mm High Speed 2 rows of drill bits, each with 5 drill bits in parallel in X-direction 1 row of drill bits with 5 drill bits in Y-direction Total drill length 70 mm Drill diameter max. 35 mm Spindle spacing 32 mm Horizontal drill gear with 4 spindles (2 right, 2 left) in X-direction, can be called up individually, drill spacing 32 mm Horizontal drill gear with 2 spindle (1 right, 1 left) in Y-direction, can be called up individually Groove saw in X-direction, diameter 100 mm Tool change spindle HSK 63 and converter 10 kW Tool diamet ...
pneumatic carcass press with 4 pressure elements from above 2 sides working area 3200 x 1600 - YOC 1975
Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passing. Automatic conversion from radius to chamfer and different edge and workpiece thicknesses. Control Power Control PC 22 OVERVIEW OF UNIT ASSEMBLY: – RELEASE AGENT SPRAYING UNIT – JOINING MILLING UNIT – GLUING PART A20 WITH 2 ROLLS Application unit PU 65 (Teflon-coated for PU gluing) – CROSS-CUT UNIT HL84 – PRE-MILLING UNIT – FK11 SHAPE MILLING UNIT – FREE SPACE UNI MILLING UNIT UF10 – PROFILE SCRAPER PN10 – FINISHING UNIT (with detergent information) – Feed rate 20 m/min – Total length 8635 mm 2. WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 12-22 mm ¦ 60 mm – For workpiece thickness 23-40 mm ¦ 105 mm – Workpiece protrusio ...
Technical Details: - X axis working area: 3050 mm - Y axis working area: 1250 mm - Main Electrospindle power: 10 KW - Number of controlled axes: 3 axes - Total number of drilling spindles: 25 - Total number of tool changer positions: 4
Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...
I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.
I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 1998 SKU:4-060-24-0165 2.056.10.3021 Saw blade: ø180 mm Nmax: 10,000 rpm
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm
1 Quickmelt incl. evaluation device level. Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below.
Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.
Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...
I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.
Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness ...
used
Aggregate for 4-Achs CNC to the extension for the 5-th axis
CNC machining center Type: Drillteq V-200 Manufacturer: Homag Year: 2023 The machine is equipped with a barcode reader Woodwop operating system In very good condition, under power Find more here - / Contact us at -
This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine.
