used HOLZKRAFT for sale

Table length : 2500 mm Table width : 800 mm Max. table stroke : 650 mm Column offset : 1000 mm Pressure shoe : 600 Sanding Shoe Length : 300 mm Sanding Pad Width : 150 mm Sanding belt length : 6400 mm Sanding belt width : 150 mm Belt blow-off device : No Top band cover : available Belt speed 1 : 18 m/sec Running Direction : Left/Right Weight approx. : 390 kg Motor power : 3 kW Extraction diameter : 2x100 mm

Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...

Connected load 380V 10A Motor power 4kW Edging table length 1600 mm Saw Blade-D. 315 mm Cutting height 90 mm Extraction 1x120mm 1x60mm (on extraction hood) Cutting width 1000 mm Table extension 400x400mm Rip fence with fine adjustment Edging frame with angle mitre stop Manual lifting and swivelling of the saw blade Saw blade tilt indicator 1x switch for direct starting of the main engine Saw blade protection cover

Sliding table saw HOLZKRAFT sc 3c 26 - exhibition machine - swivel, rip fence with fine adjustment ---------- Technical data ---------- trimming length: 2,600 mm, max. cutting height 90Â: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, cutting width with parallel fence: 900 mm, max. saw blade Ã: 315 mm, speed main saw blade: 4,000 rpm, motor power 400 V: 5.0 kW, extraction nozzle Ã: 120 / 60 mm, work table height: 900 mm, Table dimensions: 840 x 560 mm, dimensions format sliding slide: 270 x

Sliding table saw HOLZKRAFT sc 2c - Exhibition machine - swivel, rip fence with fine adjustment ---------- Technical data ---------- Suction nozzle Ã: 120 / 60 mm, work table height: 900 mm, speeds: 4,000 rpm, max. saw blade Ã: 315 mm, cutting width with rip fence: 900 mm, cutting height 90/45Â: 100 / 79 mm, cutting length: 1,600 mm, swivel range: 90 - 45 Â, dimensions (LxW): 1,020 x 325 mm, weight: 295 kg - new exhibition machine -

Band saw HOLZKRAFT HBS 533 - Exhibition machine - saw blade guide at the top, saw blade guide at the bottom, quick-clamping device via eccentric lever ---------- Technical data ---------- rollers Ã: 530 mm, max. cutting height: 270 mm, max. cutting width with stop: 474 mm, max. cutting width without stop: 514 mm, max. belt length: 3,865 mm, table size: 535 x 535 mm, table inclination: -10 - +45 Â, motor 400 V: 2.25 kW, extraction nozzle Ã: 2 x 120 mm, Cutting speed: 850 / 430 m/min., Dimensions (LxWxH): 1.02

Table milling machine HOLZKRAFT t 45c LL With table extension on the right and left, as well as pull-out workpiece support ---------- Technical data ---------- Table size: 1,945 x 695 mm, max. spindle protrusion over table: 130 mm, useful length milling spindle: 100 mm, max. retractable milling cutter Ã: 180 mm, speeds: 3,500 / 7,000 / 10,000 rpm, motor 400 V: 6.6 hp / 5.0 kW, suction nozzle Ã: 2 x 120 mm - special price - - new exhibition machine -

Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the stop rulers, with swivelling sanding unit, and oscillating sanding belt, veneer sanding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding roller ---------- Technical data ---------- sanding belt dimensions: 3,000 x 200 mm, work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, grinding surface: 1,050 x 300 mm, belt speed: 2

Band saw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide at the top, saw blade guide at the bottom, quick-clamping device via eccentric lever ---------- Technical data ---------- rollers Ã: 430 mm, max. cutting height: 270 mm, max. cutting width with stop : 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, table size: 610 x 431 mm, table inclination: -10 - +45 Â, motor 400 V: 1.5 kW, extraction nozzle Ã: 2 x 120 mm, Cutting speed: 900 / 450 m/min., Dimensions (LxWxH): 768 x

Dressing and thickness planer HOLZKRAFT fs 52es digital TERSA display machine - TERSA planing shaft, electric height adjustment, digital display for planing thickness ---------- Technical data ---------- planing width: 520 mm, thickness table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planing shaft Ã: 120 mm, number of knives: 4 pieces, passage height: 240 mm, min. workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min., Speed: 5,000 rpm, suction nozzle Ã: 120 mm, motor power 400 V

HOLZKRAFT FS30c - used-TERSA planing shaft, table opening to the rear, helical toothed feed roller, noise-insulated, dust-tested ---------- Technical data ---------- planing width: 300 mm, table length: 1,500 mm, max. chip removal: 3 mm, diameter planing shaft: 72 mm, number of knives: 3 pieces, swivel range dressing stop: 45 Â, passage height: 230 mm, min. workpiece thickness: 3 mm, min. workpiece length: 300 mm, Suction nozzle: 120 mm, weight: 264 kg Quality info:

Feeder VSA 2048 L Wood Power Exhibition Machine- - Number of Feed Rollers: 4 - Feed Speed: 2 - 33 m/min - Speed Levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Radius Max.: 1050 mm - Roller Diameter: 120 mm - Roller Width: 60 mm - Roller Travel: 20 mm Dimensions and Weights: - Length (product) approx.: 1665 mm - Width/Depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Weight (net) approx.: 73.5 kg - Explanation Weight (net) approx.: including tripod Electrical data:

Dressing and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ---------- Technical data ---------- Planing width: 410 mm, thickness table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planing shaft Ã: 95 mm, number of knives: 4 pieces, passage height: 240 mm, min. workpiece thickness: 3 mm, feed speed: 6 / 12 m/min., speed: 5,000 rpm., suction nozzle Ã: 120 mm, motor power 400 V: 6.6 hp / 5.0 kW kW, weight: 450 kg - special price - - new exhibition machine -

Dressing and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planing shaft, helical toothed feed roller ---------- Technical data ---------- planing width: 300 mm, thickness table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planing shaft Ã: 72 mm, number of knives: 3 pieces, passage height: 230 mm, min. workpiece thickness: 3 mm, feed speed: 7 m/min., speed: 5,200 rpm, Suction nozzle Ã: 2 x 120 mm, motor power 400 V: 5.5 hp / 4 kW, wt

HOLZKRAFT FBS-740-2 F32 Bandsaw Voltage: 400 V / 50 Hz Motor Power: 5.5 kW Max Cutting Width: 710 mm Max Cutting Height: 500 mm Max Cutting Speed: 1000 m/min Weight: 880 kg Find more here - / Contact us at -

Suction nozzle diameter: 260mm; Nominal volume flow: 7700 m³/h; Scout bag volume: 2 x 290 l; Filter cleaning: manual; Motor power: 4.8 kW; Dimensions: 1900 x 670 x 2800 mm (L x W x H); Weight: 88 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit enables extraction guidance from below or aboveStable metal fan wheel as standard with high-quality chassis for better stability and easy manoeuvringQuick-release fasteners for filter and chip bagFine filter bag double-woven

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal volume flow: 1900 m³/h; Scout bag volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit enables extraction guidance from below or aboveStable metal fan wheel as standard with high-quality chassis for better stability and easy manoeuvringQuick release fasteners for filter and chip bagFine filter bag double

Suction nozzle diameter: 200mm; Nominal volume flow: 2800 m³/h; Scout bag volume: 2 x 120 l; Filter cleaning: manual; Motor power: 2.2 kW; Dimensions: 1500 x 500 x 2100 mm (L x W x H); Weight: 53 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit enables extraction guidance from below or aboveStable metal fan wheel as standard with high-quality chassis for better stability and easy manoeuvringQuick-release fasteners for filter and chip bagFine filter bag double-woven

Suction nozzle diameter: 1 x 200, 3 x 100mm; Nominal volume flow: 1760 m³/h; Residual dust content: 0.1 mg/m³; Chip collection volume: 240l; Filter cleaning: motorized; Motor power: 3 kW; Noise level: 78dB(A); Machine length: 1340 mm; Machine width: 900 mm; Machine height: 2170 mm; Weight: 178 kg; Clean exhaust air by separating dust in the cyclone separator and cartridge filter Effective cartridge filter with a large filter area, easy to remove for cleaning or changing Automatic filter cleaning for consistently high extraction performance Included

Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33m/min; Tripod projection: 1050 ; Motor power: 0.75kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox

Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 8; Tripod: Tripod 1050mm; Motor power: 1/0.7kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox

Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod: Tripod 1050 plus; Motor power: 0.75kW; Uniform feed speed without loss of forceClockwise and counterclockwise rotationIncluding tripod PLUS with high-quality clamping levers and counter, individually swivelling and adjustable for horizontal and vertical useSpeeds from 3 to 18 m/min infinitely adjustable via rotary knobSpeed transmission by tapered pulley belt drive

Pressing area: 3000 mm x 1800 mm; Design: free-standing; Working Area: 1460mm x 2900mm; Number of manual hydraulic cylinders: 4; Pressing pressure per cylinder: 2000 kg; Cylinder stroke: 70 mm; Hold-down: 1; Machine length: 2900mm; Machine width: 900mm; Machine height: 2000mm;

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 150 mm; Slotted hole length: 250 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 160 kg;

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 180 mm; Elongated hole length: 240 mm; Height adjustment range: 160 mm; Motor power: 2.2 kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 260 kg; Work table can be rotated by 60 degrees on both sidesSimple operation via one-hand lever for fast and precise workDrill head mounted on double guideClamp stops allow easy and quick adjustment of the drill head runHeight adjustment of the drill head via handwheel with numerical

Spindle swivel: 0 - 45Â; Height adjustment: electric; Swivel adjustment: electric; Milling jaw adjustment: manual; Altitude display: digital; Swivel angle display: digital; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3500 / 6000 / 8000 / 10000 rpm; Motor power: 5 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2500mm; Machine depth: 1000mm; Weight: 600 kg;

Cutting length: 4100mm; Cutting height: 2200mm; Cutting depth: 60mm; Vorritzer: yes; Feed: manual; Display horizontal cut: digital; Display vertical cut: digital; Saw blade diameter: 300mm; Evasive material pad: yes; Saw blade speed: approx. 4000 rpm; Motor power: 4 kW; Machine length: 5300mm; Machine depth: 1800mm; Machine height: 3100 mm; Weight: 800kg; Smooth and ergonomic operationScoring device for tear-free cutting qualitySlatted frame automatically swervesContinuous middle workpiece supportTwo

Cutting Length: 5100mm; Cutting height: 2200mm; Cutting depth: 60mm; Vorritzer: yes; Feed: manual; Display horizontal cut: digital; Display vertical cut: digital; Saw blade diameter: 300mm; Evasive material pad: yes; Saw blade speed: approx. 4000 rpm; Motor power: 4 kW; Machine length: 6300mm; Machine depth: 1800mm; Machine height: 3100 mm; Weight: 800kg; Smooth and ergonomic operationScoring device for tear-free cutting qualitySlatted frame automatically swervesContinuous middle workpiece supportTwo

- Swivel table, saw blade guide at the top, saw blade guide at the bottom, cutting height adjustment via rack , with millimeter scale ---------- Technical data ---------- rollers: 640 mm, max. cutting height: 400 mm, max. cutting width: 620 mm, max. belt length: 4,780 mm, table size: 870 x 620 mm, table inclination: 0 - +15, motor 400 V: 2.2 kW, cutting speed: 1,660 m/min., weight: 320 kg new exhibition machine

- Exhibition machine - saw blade guide at the top, saw blade guide at the bottom, quick-clamping device via eccentric lever ---------- Technical data ---------- rollers: 530 mm, max. cutting height: 270 mm, max. cutting width with stop: 474 mm, max. cutting width without stop: 514 mm, max. belt length: 3,865 mm, table size: 535 x 535 mm, table inclination: -10 - +45, motor 400 V: 2.25 kW, extraction nozzle: 2 x 120 mm, Cutting speed: 850 / 430 m/min., Dimensions (LxWxH): 1,020 x 850 x 1,982 mm, Weight: 163 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm new exhibition machine

Spindle speed: 4460minâ»Â¹; Min. workpiece dimension X: 300mm; Min. workpiece dimension Y: 90mm; Min. workpiece dimension Z: 10mm; Max. travel speed X-axis: 20m/min; Tool diameter max.: 35mm; Max. workpiece dimension X: 3000mm; Max. workpiece dimension Y: 900mm; Max. workpiece dimension Z: 50mm; Grooving saw speed: 5700minâ»Â¹; Dimensions: 3704mm x 1455mm x 2209mm (L x W x H); Nominal diameter of suction nozzle outside: 120mm; Power drive motor: 2.2kW; Weight: 1200kg; A drill head with seven vertical, four horizontal spindles and a groove saw unit For drilling holes on the top of the plate and on all four sides of the workpiece, as well as grooving in the X-direction grooves in the phenolic resin work table, through-hole drilling is also possible The workpiece movements on the X, Y and Z axes are carried out on linear prism guides Compact external dimensions Inclu ...

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: from 8mm - 50mm; Workpiece width: minimum 110mm; Glue basins: granules, quick-change basins; Cross-cut scissors: yes; Caps / flush sawing: yes ; Milling Station: Bevel / Radius; Corner copying: yes; Flat - Scraper: Yes; Radius Scraper: Yes; Schwabbel: Yes; Anti-Adhesive Spray Unit: Yes; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 3314 mm; Machine width: 1085 mm; Weight: 545 kg; Convenient and simple control of all important functions via control panel at the front Excellent accessibility to the working units thanks to the large hood, which provides additional protection and noise reduction Precise and proven units enable optimum machining and perfect finishing of the edge Pre-milling unit equipped with two slide milling cutters Hi ...