used Joiners circular saws for sale

Format saw Altendorf Type: F 45 Year of Make: 1989 Sliding carriage length 2800 mm Saw blade swivel 45° With scoring Extraction hood above the saw blade including wide extraction hood for 45° cuts and narrow hood for 90° cuts Angle stop on the sliding carriage Motor power 5.5 kW Scoring motor 0.75 kW Cutting width to the right of the saw blade 1050 mm With table extension With table extension Saw blade diameter maximum with scorer 350 mm max. saw blade diameter 400 mm without scorer Cutting height at 90° maximum 130 mm Cutting height at 45° maximum 90 mm Saw shaft speed 3000/4000/5000/6000 rpm. Extraction connection via saw blade diameter 80 mm Suction connection bottom diameter 120 mm Length stop with magnifying glass with roller support Weight: approx. 1200 kg

double trolleys, swivelling, Parallel stop man. Dissimulation Rip fence with fine adjustment, Control at eye level, swivel, 99 storable editing programs, Control F45 ProDrive, electric height adjustment, electric swivel adjustment, Height and swivel adjustment with autom. Height correction, Digital display of the swivel angle, Digital display of the cutting height, Tool clamping system AKE, simple calibration of the axles, Machine diagnostics, Hour meter, USB interface, Call of the last dimension entry (back function), dust-tested ----------Specifications---------- Swivel range: 0 - 46 °, Cutting length: 3,000 mm, Cutting width: 1,000 mm, max. saw blade Ø: 450 mm, max. saw blade protrusion: 150 mm, Fixed Position Angle Stop: 90°, one. adjustable via dimensional scale up to: 3,200 mm, Speed: 3,000 / 4,000 / 5,000 rpm, Motor power 400 V: 7.5 hp / 5.5 kW, Mac ...

Sawblade tiltable: nein °Length of the rolling table: 2800 mmcutting width: 1250 mmMotor output: 5,5 kWCutting height: 125 mmCutting height at 45°: mmSaw blade diameter: 400 mmSpeed: U/min.weight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: - °Length of the rolling table: 2.500 mmcutting width: 1.000 mmMotor output: 4,0 kWCutting height: 130 mmCutting height at 45°: - mmSaw blade diameter: 400 mmSpeed: 3/4/5/6.000 U/min.weight of the machine ca.: 970 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 400 mmCutting height: 130 mmcutting width: 700 mmCutting height at 45°: mmSpeed: U/min.Sawblade tiltable: °Length of the rolling table: mmsawing motor: 6,0 kWweight of the machine ca.: 1,1 tdimensions: 2,3 x 1,6 x 1,6 msliding table saw- incl. suction unit- further accessories see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 400 mmCutting height: 130 mmcutting width: 700 mmCutting height at 45°: mmSpeed: 5000 U/min.Sawblade tiltable: °Length of the rolling table: mmsawing motor: 5,5 kWweight of the machine ca.: 0,85 tdimensions: 3,0 x 1,5 x 1,2 mSliding table saw- 10,000 mm parallel stop- Table length 30,000 x 1,500- See pictures for additional accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hardly used format saw from Altendorf built in 2021 Equipment: Sliding Table Saw F25 CE 5.5 kW (7.5 hp) two speeds (3600/4200 min) Parallel stop man. 1000 mm with Digit X Angle mitre stop manual 3450 mm Large protective hood 315 mm Saw Blade CE 100 mm cutting height, 70 mm at 45° Height and swivel manually Machine height 880 mm Weight 735 kg

Sawblade tiltable: 45 °Length of the rolling table: 3.000 mmcutting width: 800 mmMotor output: 7,5 kWCutting height: ca. 180 mmSaw blade diameter: 500 mmSpeed: 3/4/5/6000 U/min.weight of the machine ca.: ca. 1.000 kg: Nein : Digital, DigitX : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

F 45 EvoDrive: The new F 45 is a masterpiece in terms of technology and design. The one from the ground up on newly designed machine stands exceeds all previous values in the points torsional stiffness and low vibration. The smooth front and the legroom on the ground let you get closer to the sliding table saw and stand on the workpiece. The design-adapted, legendary smooth-running double trolleys is still the measure of all Things when it comes to precision cuts and zero maintenance. In addition comes the control at eye level, with which you can adjust the height and swivel of the saw blade plus, depending on the choice of the control package, the speed and more functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: With this sliding table saw characterful design meets timeless aesthetics. 7 touchscreen with separate keyboard Aut ...

Sliding table saw Altendorf Type F90 Machine No. 66-9-135 Sliding carriage length 2200 mm Cutting width 800 mm Motor power 5.5 kW Flat belt drive, 2 speeds Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Packaging dimensions approx. 2200 mm x 1400 mm x H 1500 mm Weight approx. 855 kg

Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition

Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition

New exhibition machine List price 18.670€ net Saw blade adjustment • Electromotive height and swivel adjustment 0-46° for the main saw blade • Digital swivel angle display Saw blade protrusion • max. 150 mm, saw blade diameter max. 450 mm Control panel • on the machine stand Double Trolleys • Carriage length 3000 mm incl. stepless superstructure locking Rip fence, cutting width 1000 mm • Manual adjustment incl. fine adjustment, adjustable via dimensional scale Angle mitre stop, cutting to length up to 3500 mm • Manually adjustable via dimensional scale Drive power and speed 5.5 kW (7.5 hp) with 3 speeds, 3/4/5,000 rpm, manually adjustable Tool clamping system AKE for the main saw blade

Main motor 5.5 KW Scoring saw

Motor 5.5 kw + 0.75 kw Rotatable control panel Electric height adjustment for saw blade Weight 780 kg

Sliding Table Saw Fields Format 4 Kappa 450 Heavy precision sliding table saw Scoring unit Motor 5.5 kW Saw blade tiltable 90 - 46° electr. Angle and height adjustment Saw blade diameter up to 450 mm Trimming length 3200 mm Cutting width with rip fence 1200 mm Year of manufacture 2005 CE version Machine from joinery liquidation / retirement in VERY GOOD CONDITION from the carpentry workshop

Sawblade tiltable: 45 °Length of the rolling table: 2.800 mmcutting width: 1.250 mmMotor output: 7,3 kWCutting height: 140 mmSpeed: 4.000 U/min.: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular Saw – Milling Machine Combination Fields Type: KF 7 Carriage length 2300 mm Cutting width 800 mm Cutting height 105 mm Saw blade diameter max. 315 mm Saw/milling machine swivel 0 – 45° degrees Milling speed 3700/6500/7800 rpm Weight approx. 600 kg

Sliding Table Saw Milling Machine Combination Machine Table Saw Circular Saw Carpenter Circular Saw Format Saw Panel Saw Table Milling Machine Swivel Spindle Milling Machine FIELDS Type: KF7 X Year 1998 Format sliding carriage 270 cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence with fine adjustment up to approx. 122 cm Boom table with extendable cut-to-length stop up to approx. 320 cm Cut-to-length stop adjustable to mitre Additional mitre stop Motor power main motor 5.5 KW saw shaft remounted. Swivel spindle milling machine Manual height adjustment of the swivel spindle Manual swivel of the milling spindle up to 45° backwards. Milling spindle diameter 30 mm 3 speeds adjustable via belt. Milling spindle under table retractable and removable. Engine power milling unit 5.5 KW Mill ...

Sliding Table Saw Milling Machine Combination Machine Table Saw Circular Saw Carpenter Circular Saw Format Saw Panel Saw Table Milling Machine Swivel Spindle Milling Machine FIELDS Type: KFS37 FL YOC 1994 Format sliding carriage 245 cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence with fine adjustment up to approx. 75 cm Boom table with extendable cut-to-length stop Miter stop Motor power main motor 4 KW Swivel spindle milling machine Manual height adjustment of the swivel spindle Manual swivel of the milling spindle up to 45° backwards. Milling spindle diameter 30 mm 3 speeds adjustable via belt. Milling spindle under table retractable and removable. Engine power milling unit 4 KW Milling fence with fine adjustment on both milling jaws. Prior viewing is expressly desired, simply  ...

Sliding Table Saw Milling Machine Combination Machine Table Saw Circular Saw Carpenter Circular Saw Format Saw Panel Saw Table Milling Machine Swivel Spindle Milling Machine FIELDS Type: KFS37 FL YOC 1992 Format sliding carriage 245 cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence with fine adjustment up to approx. 75 cm Boom table with extendable cut-to-length stop Miter stop Motor power main motor 4 KW Swivel spindle milling machine Manual height adjustment of the swivel spindle Manual swivel of the milling spindle up to 45° backwards. Milling spindle diameter 30 mm 3 speeds adjustable via belt. Milling spindle under table retractable and removable. Engine power milling unit 4 KW Milling fence with fine adjustment on both milling jaws. Machine is equipped with a chassis with lift ...

Scoring Motor 5.5+0.55 kw Electric height adjustment Electric swivel adjustment

Scoring Motor 4+0,55kw

Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop

Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...

Connected load 380V 10A Motor power 4kW Edging table length 1600 mm Saw Blade-D. 315 mm Cutting height 90 mm Extraction 1x120mm 1x60mm (on extraction hood) Cutting width 1000 mm Table extension 400x400mm Rip fence with fine adjustment Edging frame with angle mitre stop Manual lifting and swivelling of the saw blade Saw blade tilt indicator 1x switch for direct starting of the main engine Saw blade protection cover

400 V, 50 Hz, 2.2 Kw, Cutting height 100 mm, Cutting width 500 mm (extension table + 900 mm added, but the customer shortened the round bar from the rip fence), Sliding table 2600 mm, max. saw blade 315mm, Work table 1060x330 mm, Table extension 390x330 mm, Table extension 900x810 mm, Boom table 1050x630 mm, Cut-to-length stop up to 2800 mm, Height and angle adjustment manually, Extraction connection 100 mm, Hold Operating tools, Spare straps

SPECIFICATIONS: Carriage length: 3200 mm Saw: Ø 400 mm Scoring machine: Ø 120 mm Installed power: 5.5 HP Saw blade inclination: 0 - 45° Voltage: 380 V

Sawblade tiltable: 45 °Length of the rolling table: 1.800 mmcutting width: 1.050 mmMotor output: 4,5 kWCutting height: 135 mmCutting height at 45°: 90 mmSaw blade diameter: 400 mmSpeed: 3.000 / 4.000 / 6.000 U/min.weight of the machine ca.: 750 kg: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sliding table saw Martin T 60 Heavy precision sliding table saw Axis Positioning Control 5.7 Touch Screen Car. Scoring unit Motor 5.5 kW Saw blade tiltable 0 - 46° Saw blade diameter up to 400 mm Trimming length 3000 mm Cutting width with rip fence 1250 mm Width stop adjustment automatically via NC control Reading width stop via touch screen Swivelling control panel above table CE version Machine is WORKSHOP OVERHAULED in TOP CONDITION from stock Lieboch

Martin T60C Sliding Table Saw Brand Martin Type T60C M-No.: V482223 Year of Make: 2008 Control panel: touchscreen integrated at eye level in the extraction support 2-axis control (saw height, inclination, cutting width with handwheel adjustment but with digital readout of the cutting length in the screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivel: 0° - 45° Speed control: 4,000/4,800/6,000/tpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 850 mm, handwheel adjustment with readout in the screen and +/- 0.05 mm accuracy Table: galvanized steel with fixed-angle stops 0º, 22,5º, 30ºen 45º. Dimensions: 1,340650mm Length stop: 2,200 - 3,300 mm with analogue readout, folding latch with magnifying glass Suction: Top: ø100 mm, Bottom: ø120 mm Weight: 1,400 KG

MARTIN T74 Automatic sliding table saw with 4-axis CNC control -Paratable integrated as 5th axis in the control and 3-axis scoring Mark: MARTIN Type: T74 AUTOMATIC - Radio Control Year of Make: 2008 M-No.: V484794 Table dimensions: 1,350 x 1500 mm. with table extension 600400 mm with tool storage Table height: 900mm Edging table: 3,300mm Main saw: 5.5 kW Saw blade shaft: ø 30 mm. with two drive pins 10 mm Saw blade change: ProLock quick-change system Saw blades: Ø 250 - 500 mm; up to Ø400 mm retractable under table; up to Ø400 mm can be combined with scoring Cutting height: CNC control up to max. 170 mm. (saw blade 500 mm) Saw blade swivel: CNC control 0 - 46° Cutting width: CNC control 1,350 mm Scoring machine: 3-axis controlled scoring machine Rip Fence: CNC Control Rip Fence; End position can be lowered automatically below table level Parallelogramtic: mi ...

Feed, circular saw feeder for sliding table saws For cutting strips, window scantlings, ABS edges narrower, etc. Attachment to the circular saw stop Motor 0.14kW, 380 Volt Two feed speeds 13 + 16m/min Integrated electric safety magnet system fixes the feed with an electromagnet on the saw table Quick adjustment of workpiece height via handwheel Rubberized feed rollers sawn a bit, but still usable Max. workpiece height approx. 80mm Minimum workpiece length approx. 200mm Suction connection Original paint, only slightly dabbed CE mark with mobile timber transport box The mounting rail is 41x21mm, inner dimension 31 x 11mm, groove width 13mm Adaptable to many sliding table saw manufacturers, but there are also other adaptor rails from Panhans Weight approx. 30kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonst ...

Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table

Connected load 380V 6.1A 3.8kW Saw blade diameter max. 315 mm Weight approx. 330 kg Length of trimming carriage 2150 mm Speed 4000 rpm Suction nozzle 100 mm Cutting width 1100 mm Angle stop Rip fence

Connected load 380V 15.8A Saw motor 5.5kW Scoring motor 1.2kW Electric height adjustment Electric swivel with LED display Length of trimming carriage 3000 mm Cutting width 1200 mm PSV with narrow hood Table extension 1000 x 470 mm Scoring pneumatically height-adjustable

Connected load 380V Main motor 7.5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram protection device with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric swivel with Siko indicator Extraction connection 1x100mm 1x120mm

Sawblade tiltable: 45 °Length of the rolling table: 3.200 mmcutting width: 1.340 mmMotor output: 7,5 kWCutting height: 150 mmCutting height at 45°: 106 mmSaw blade diameter: 450 mmSpeed: 2.350 - 5.200 U/min.weight of the machine ca.: ca. 1.100 kg: Variabel - Stufenlos : Elektrisch : Elektrisch : Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connected load 380V 14A Motor power main motor 5.5kW Scoring motor 0.9kW Length of trimming carriage 3200 mm Cutting width 1400 mm Manual rip fence with LED display EASY electronic control for swivel and height adjustment Main saw blade and scorer can be switched on and off from the edging carriage PSV with narrow hood Miter stop Edging stop Angle stop Hold Weight approx. 1050 kg

Used machine built in 2020 Main saw blade Ø: 550 mm Ø that can be used at the same time: 450 x 120 mm Format cuts with pull-out stop with trolley 3200 mm: 3200 x 3200 mm Saw blade speed: 2500 / 3500 / 5000 rpm Format cuts with pull-out stop with trolley 3800 mm: 3800 x 3200 mm Swivel range: 0 +46° Max. saw blade cutting height at 90°: 200 mm Max. saw blade cutting height at + 45°: 130 mm Max. saw blade cutting height at -45°: 105 mm Scoring speed: 8500 rpm Ø Suction nozzle on machine frame: 120 mm Ø Suction nozzle saw blade pendulum protection: 100 mm Main motor power Hz50: 7 kW Scoring unit power Hz50: 1.3 Kw (1.7 HP) Scoring Ø: 120 mm Cutting width with rip fence: 1500 mm

I am selling a sliding table saw with SCM SI 300N scoring machine, built in 2000. Table length 3200mm. Max. cutting width a.square stop 1950 / 2850mm. Max. cutting width a.Rip fence 1270mm. Motor 5.5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Main saw blade speed (scorer) 4000 (8000) rpm. Condition very good, available same. Please contact us for more photos.

SPECIFICATIONS: Saw carriage length: 3050 mm Saw blade: Ø 350 mm (5.5 hp) Scoring: Ø 120 mm (0.75 HP) Saw blade inclination: 0 - 45° Voltage: 380 V

WEIBERT WJ-K315-A Sliding table saw Format sliding table: 3000mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A