BYSTRONIC BySprint 3015 laser cutting machine was built in 2006 in
Switzerland. Designed for even the most intensive machining, the
machine uses an extremely stable 3 kW laser beam, whose excellent
parameters ensure the highest energy efficiency while maintaining low
operating costs. Additionally, in order to meet any production
challenges, the process of loading and unloading the workpieces can be
performed during the cutting process, which significantly increases
production efficiency and reduces machine downtime to a minimum. The
offered BySprint 3015 laser cutting machine has been regularly
serviced and its total weight is approximately 12000 kg.
Technical specifications of the BYSTRONIC BySprint 3015 laser
- laser beam power: 3 kW
- laser beam power adjustment range: 150 – 3000 W
- work area (L x W): 3048 x 1524 mm
- maximum sheet metal dimensions (L x W): 3000 x 1500 mm
- maximum sheet metal weight: 750 kg
- Z-axis feed rate: 70 mm
- maximum parallel positioning speed in the X and Y axes: 100 m/min
- maximum simultaneous positioning speed in the X and Y axes: 140
m/min
- maximum acceleration in the X and Y axes: 8 mm/s2
- cutting speed: 50 m/min
- table change time: approx. 35 s
- tolerance according to VDI 3441: ± 0.1 mm/m
- repeatability: ± 0.05 mm
- weight of machine: approx. 12000 kg
Equipment of BYSTRONIC laser cutting machine
- CNC control: BYSTRONIC ByVision
- laser source: BYSTRONIC ByLaser 3000
laser type: CO2
pulse frequency: 1-2500 Hz
beam diameter: 18.4 mm
wavelength: 10.6 μm
laser beam divergence: ≤ 1.2 mrad
laser beam amplification: glass tubes
laser source dimensions (L x W x H): 3150 x 800 x 1700 mm
weight of laser source: 1600 kg
- automatic pallet exchange system
- dust extraction system: DONALDSON TORIT DFPRO 4-3000
suction capacity: 3000 m3/h
maximum inlet pressure: 6 bar
pressure reserve: 250 dPar
maximum consumption (short-term): 16.2 Nm3/h
average consumption: 0.2 Nm3/h
impurity content in clean air: < 0.5 mg/m3
number of filters: 4
filter area: 70.6 m2
dimensions of the dust extraction system (L x W x H): 1400 x 1400 x
2070 mm
weight of the dust extraction system: 820 kg
- cooling unit: EF COOLING WKL 300
capacity: 11600 m3/h
cooling power: 35 kW – 30000 kcal/h
flow rate (at 5.5 bar): 110 l/min
maximum operating pressure: 6 bar
connection dimension: ½ inch
unit dimensions (L x W x H): 2200 x 1000 x 2000 mm
weight of unit: 945 kg
Poland
