Ceetec's new A250 paint machine is here! As an official and exclusive
sales partner for the German-speaking region, I am pleased to present
our latest model to you.
After almost 50 years of construction of the previous model since the
beginning of the 1970s (better known as the GORI brush machine), the
new model is now an extensive update with extended applications.
Who is this machine suitable for?
- Carpentry /carpentry that manufactures carports, facades, terraces,
garden houses, etc.
- Wood industry companies that paint, read or impregnate industrial
boards / beams / slabs etc.
Technical data:
max. workpiece height: 250mm
max. workpiece width: 250mm (or 380mm = Ceetec A380)
Speed: 16-42m/min
Connection: 400V / 1.5kw
Benefits ggü. simple spray painting:
1. The wood protection is massaged evenly into all pores, which
ensures a high resistance.
2. Different suction behavior (e.g. especially for spruce) is largely
equalized, because first a surplus is applied, which absorbs about
2-3s into the wood before the brushes peel it off.
Advantages over vakumaten:
- Depending on the product, more beautiful end result
- Easier to use, shorter set-up times
- No stencils etc. required
- Significantly less difficulty with wood-related irregularities
(warped, dimensional deviation..)
- Significantly lower energy costs (2kw)
- Lower acquisition costs
- Also four-sided or three-sided painting possible
- Lower requirements for the paint (defoamers/long open time, etc.)
If you would like to know whether the A250 is also suitable for your
application, please call us, we will be happy to advise you!
The principle is very simple:
In the front area, the workpiece is flooded all around with lacquer
material (lacquer/glaze/impregnation/oil) and in the rear area 8
counter-running brushes (2 per side) reattach the excess material and
massage it into all pores at the same time, so that the wood
protection is optimally applied.
The matching roller conveyors are equipped with disc rollers in the
outlet, which leave only minimal impressions.
When using a water-based system, the machine is then simply cleaned
with water. The polluted water (15-40L per cleaning) can either be
collected by a waste disposal company, or reprocessed to reuse it /
cheaper than waste water. We also provide you with competent support
in these questions.
To make the purchase of your new brush machine a complete success for
you, we offer the following services:
• Demonstration service: For a fee of 200€, we will present the
A250 on site throughout Germany. The fee will be refunded for
purchases within 12 months.
• Joint commissioning with you on site
• A detailed instructions for use as well as additional documents
• Free telephone support from Bruhn-HVT
• Youtube tutorials from Ceetec
• We work with several well-known paint manufacturers who use our
machine in their own technical center to further develop their paints
specifically for our machine.
• The spare parts supply is secured for decades, as everything is
manufactured by Ceetec itself in Denmark
We also offer suitable accessories such as grinding machines and horde
trolleys, which are optimally suited for our coating machines
/machines (high-edged square steel tube for minimal impressions).
The new A250 is usually available at short notice from stock in
Denmark.
Germany
