Description Clutch disc for cutting machine Wohlenberg 137 MCS
Description Punch cutter for saddle stitcher Heidelberg Stitchmaster ST 350 with punching tool radius 5mm (others on request)
Description MicroJet Slide Feeder MJ 45 A with MicroJet Conveyor
Description GUK reversible table from 2009 mobile height adjustable frequency controlled
Description Angle 180 Bandwidth 400mm Width of the curve outside (distance from edge to edge) 187cm
Description Parcel logistics Mailroom handling Vacuum – Tube lifter Schmalz Jumbo 50 with swivel arm for wall mounting Payload 80 kg, boom approx. 3.5 m Sound insulation box for vacuum pump with wall mounting frame 2 different suction plates
Description for the storage of flammable liquids Approved for the storage of flammable liquids at the workplace -Tested and approved overall design by recognized materials testing institute according to EN 14470-1 (Type 90) with a fire resistance of > 90 minutes – Outer body sheet steel – 2 hinged doors – Inner body made of HPL coated panels – RAL 7035 – Stainless steel bottom rail – Niro rhombus – 2 shelves in grid height-adjustable – Doors over Cylinder lock lockable
Description Remnants – GMP POLYNEX UltraBond hot laminating film 8×2 rolls GMP POLYNEX Goss UltraBond gloss 40mic, 305mmx500m OPP film glossy for digital prints, core 77mm The POLYNEX UltraBond hot laminating film has a newly developed special hot glue with particularly good adhesion to toner-based digital prints from e.g. Xerox (except EA toner of DC 240/250/260), Canon, Kodak, Konica Minolta. Particularly suitable for use in systems with automatic sheet separation. Processing temperature: approx. 105 C
Description mobile belt conveyor Pfaff 60-3000 from YOC 1998 Gear motor with frequency-controlled speed heavy, structured rubber conveyor belt Bandwidth 60cm Belt length 3000cm 4 lockable transport rollers
Description Storage of hazardous substances – hazardous material station, hot-dip galvanized STW-2VB Storage according to the Water Resources Act (WHG) Approved for the storage of flammable liquids. Side and rear walls closed (solid sheet). 3-fold stackable. Payload: 850 kg/m² Dimensions HxWxD 1440x1390x905 Capacity 2×200 l drum Collection volume 225l Weight 150 Cart 1000kg
Description Tapping machine Rems Tornado Type 2010 220V, 50Hz Second-hand machine Tapping machine for pipe threads (1/16) 1/8 – 2, 16 – 63 mm, Bolt thread (6) 10 – 60 mm, 1/4 – 2. With maintenance-free gearbox, safety foot switch with emergency stop, 2 automatic chucks, automatic lubrication cooling. With tool set, consisting of a universal automatic cutting head for all threads, also long thread, automatically opening, with automatic thread length for tapered threads, cutting jaws for pipe threads tapered ISO 7-1, EN 10226 (DIN 2999, BSPT) R 1/2- 3/4 and R 1 – 2 right, pipe cutter, internal tube deburring device, pressure lever. Height-adjustable material support. Pole-changing capacitor motor 230 V, 50 Hz, 2100 W. 52/26 min-1, also under full load. Very quiet running. Portable, 3 tubular legs, roller support
Description Conversion kit high-speed cutter Wohlenberg from Monitor Tube chassis system 85/86/90 to LCD chassis The following steps are necessary for the conversion to LCD: 1. Disassemble the monitor chassis 2. Remove the picture tube and circuit board (ventilate the tube properly, dispose of) 3. Function keys, alpha keyboard is retained (if available) 4. New LCD chassis, loosen nuts and lift the frame 5. Insert chassis from behind, attach front bezel and screw it in place 6. AMP connector from the CPU unplug, eject contacts 7. Set the voltage on the potentiometer to 12 volts 8. Press in new pins after enclosed pin assignment 9. For System 86/90, pinch off the crimp contacts and insert them into the pin header 10.AMP connector System 85 / Plug in pin header on System 86 11.For System 86/90, tap the voltage on the switching power supply (snap terminals) 12.Settings of the LCD monitor ar ...
Description Heidelberg Prinect Signastation 106 sheet mounting software from full maintenance contract Program version 21.00
Description Microjet height-adjustable, frequency-controlled suction belt table for addressing Length approx. 1600m inlet width approx. 85.cm
Description Denios IBC station for 1000 Lite Denios IBC station S made of PE – ideal for optimal storage of hazardous liquids for storing 1,000-liter containers or smaller containers, for optimal storage of various acids and alkalis as well as for oils and non-combustible cleaning chemicals Storage area integrated Collection volume 1000 l Storage location under roof Height 860 mm Width 1280 mm Length 1660 mm Material Polyethylene (PE) Capacity KTC/IBC1 Storage area Material Polyethylene (PE) Substructure with support feet Forklift movable load capacity 2000 kg Approval Construction supervisory approval (DIBt) Classification of fluids hazardous to water acute, chronic GHS 1, chronic GHS 2, chronic GHS 3, chronic GHS 4 Classification according to GefStoffV/BetrSichVOn metals corrosive, corrosive, skin corrosive, causing severe eye damage Color blue
Description Hazardous substance storage Denios PSE-4 450 litres Storage area integrated Collection volume 450 l Material Polyethylene (PE) Capacity KTC/IBC1 Storage area Material Polyethylene (PE) Substructure with support feet Forklift movable load capacity 1250 kg Approval of building authority approval (DIBt) Classification of liquids hazardous to water acute, chronic GHS 1, chronic GHS 2, chronic GHS 3, chronic GHS 4 Classification according to GefStoffV/BetrSichVOn metals corrosive, corrosive, skin corrosive, heavy Eye damage causing color blue
Description Transnorm curve belt – curve belt conveyor 180 YOC 2008 Angle 180 Head difference 400mm (by adjustable feet) Bandwidth 600mm Nominal radius 600mm Width of the curve outside (distance from edge to edge) 187cm
Description Cutting strips for cutting machines from Polar Mohr , Wohlenberg , Perfecta , Ideal , Polar , EBA , Krug & Priester
