Machine in good condition with sliding table Operational with suction device

saw blade diameter: 275 mmcutting diameter: bis 90 mmcutting range flat: 120 x 75 mmturning speeds: 40/80 U/minmiter cut: 45°/90°/-45° °weight of the machine ca.: ca. 150 kgManual saw blade feedAccessories:Coolant deviceUnderframe with 2 drawersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: mmcutting diameter: mmstroke: mmturning speeds: 10/20 U/minengine: 380 V / 12 A total power requirement: kWweight of the machine ca.: 1-100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 mmcutting diameter: 80 mmstroke: mmturning speeds: 58 U/mintotal power requirement: 0,5 kWweight of the machine ca.: 70 Kgdimensions of the machine ca.: 0,5 x 0,5 x 0,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mmcutting diameter: 90 mmstroke: mmturning speeds: 40/80 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 650 Kgdimensions of the machine ca.: 0,9 x 0,8 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade: ø 425 mm Saw Capacity: 145mm Round 120 mm square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Auto. Roller conveyor start: MPS, type 4010, 8 meter range Equipped with: - Semi automatic - Hydraulic clamping - Variable saw feed Country of origin: Germany Motor power: 5.5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

saw blade diameter: 250 mmcapacity 90 degrees: round: 70 mmcapacity 90 degrees: square: 65 mmturning speeds: 52 / 104 U/mintotal power requirement: kWweight of the machine ca.: 0,13 tdimensions of the machine ca.: 800 x 600 x 1500 mManual cold circular saw with:- Mitre 45°/45°- Machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.

saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: U/mintotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 1,8 x 1,95 mAutomatic circular saw with- Feed roller conveyor 1500- Roller conveyor with stop 1000mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref.Nr. 00847 Name of the system Used robust cold circular saw Manufacturer: Kaltenbach Model KKS 400 H Year of manufacture 1985 Research: Saw blade diameter diameter: 400mm Cutting diameter: approx. 130mm Stroke: 150mm Total power: 1.8/2.7 kW Weight: 850kg Dimensions approx. 1205 x 1005 x 1705mm Cutting range 90 degrees square 120x120mm Cutting area 90 degrees flat 315x40mm Cutting speed: 10-40m/min Operating Voltage 380V 3~/50Hz Submission date immediately

saw blade diameter: 400 mmmiter: . : Kühlung weight of the machine ca.: 1 tnumber: 4 Stück The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting speed: 30 - 130 m/mintotal power requirement: 1,5 / 2,6 kWweight of the machine ca.: 0,55 tdimensions: 1,2 x 0,8 x 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmserial number: 109967 volt: 380 Vfrequency: 50 Hzweight of the machine ca.: 500 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: U/mintotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 1,8 x 1,95 mAutomatic circular saw with- Feed type RB 1500- Roller conveyor 1500mmGood conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 380 mmpneumatic clamping: ja weight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold circular saw as shown. Fully functional. Was used in maintenance until the end.

saw blade diameter: 350 mmType of input current: dreiphasig mitter cutting - all-position: -45 bis + 60 °Max. sawing capacity: 95 x 95 mmweight of the machine ca.: ca. 480 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mmcutting diameter: 120 mmstroke: 370 x 32 x 3 mmControl: total power requirement: 5,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Metal Circular Saw Int. Art. Ref. m3656 Manufacturer Metallkraft Type MKS 350 Year of construction approx. 2004 Motor power 1.4/2.4 kW Speeds 40/80 rpm. Vise span 120 mm Saw blade diameter 350 mm Weight approx. 210 kg Cutting performance: - Tube 90° 90 mm - Tube 45° 80 mm - Round, full 90° 65 mm - Round, full 45° 60 mm - Square 90° 85x85 mm - Square 45° 70x70 mm - Rectangle 90° 120x70 mm - Rectangle 45° 80x70 mm Accessories: - various tools and keys -Coolant pump -Saw blades -Oil -Guide Item location: 59425 Unna The machine can be visited. We will be happy to send you more photos by e-mail. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimension ...

– Saw blade 400 mm – Double mitre – Material clamp – Material depot –Cap –Documentation – 400V

1. Qty. 1 Second-hand circular knife scissors Mfc.: Schmitz Dim.: 650 x 1.5 mm Including tools 2. Qty. 1 Second-hand circular knife scissors Mfc.: Schmitz Dim.: 520 x 1.5 mm Including gearbox – Mfc. Bauer 3. Qty. 1 Second-hand circular knife scissors – excenter Mfc.: Julius Dim.: 650 x 1.5 mm Without tools! 4. Qty. 1 Second-hand guillotine shears Mfc.: Wieger , W. Theis Type: SW8/80 Dim.: 3475 x 60 x 8 mm - L x W x T One set of tools! 5. Several second-hand pillar jib cranes 10 T C-Hook Holding dim.: 650 mm