used Dowel jointer for sale

BOTTENE – PASMEC moulding line for beads and planks, composed as follows: Automatic loader PASMEC, year 2005 : - PLC for work cycle programming - arm with suction cup system and vacuum pump - 1600mm useful stroke, brushless motor and prismatic guides - side aligners + pneumatic introducer pusher BOTTENE TARGET 606 moulder with 6 shafts, year 2017: – useful working measures 230x150mm – gimbal towing and differentiated pneumatic pressure – variable feed speed 6 – 60 mt/min with inverter – feed motor KW 7,5 – HP 10 – top feed wheel before the 1st shaft – group of tandem feed wheels in front of the 2nd shaft – overlapping feed wheels (top + bottom in the plane): at machine entrance, before the 1st shaft between the 4th and 5th tree at machine output, after the 6th shaft – short 1200mm entry plane – lubrication pump – protection cabin  ...

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

Automatic double cut-to-length – mitre saw Schelling Coffin Saw Type DAK Machine No. 130472-01 With groove saws for insertion jointers And drilling units for the handles Working range length maximum 3000 mm Maximum depth approx. 700 mm, saw stroke pneumatic Saw motors, aggregates swivel by -5° to + 45° Saw arms rotatable 50° - 0° - 50° 2-hand operation 2 saw motors each 4 kW 2 grooving saw motors Width adjustment of the sawing units adjustable with handwheel, with width indicator

Heavy Hochleistungshobelmaschione type Waco 6,000 with 8 spindles. Feed speed 75 m/min up to 600 m / min. Spindles: U/O/RE/LI/U/O/O/U Working height: 17 mm to 120 mm. Max-width 50 mm up to 350 mm. All spindles with Jointer. Machine with feeder table (accelerator) and cross conveyor. Complete switchgear including FU's. Including soundproof cabin! RONDAMAT and washing machine for planing heads. 1 set of tools.

working width 230mm working height 120mm 6 heads Head arrangement: lower/right/left/upper/upper/lower spindle motors 7.5kW each automatic lubrication of the table Memory System Automatic control spindle diameter 40mm spindles with bearings on both sides the last two heads equipped with a manual jointer year of production 2005

working width: 300 working height: 200 5 Heads: Lower/Right/Left/Up/Lower adjustment of heads in two axes infinitely variable feed speed up to 34 m/min manual jointer on the last two heads spindle diameter: 50 pneumatic clamp electrically adjustable pressure beams year of production: 1989 Machine working time: 2665 mth

Weinig Hydromat H22N four-side planer - German production -DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - Spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min Feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers One Upper Rubber Pulling Roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th s ...

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th s ...

Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber pulling rollers pneumatic clamping 1-6-7 spindle joint automatic countertop lubrication feeding table 3000 mm Speed adjustable smoothly up to 100 m/min two upper pneumatic rollers six bo ...

working width 230mm working height 160mm 5 heads Head arrangement: lower/right/left/upper/lower spindle diameter 40mm (last 50mm) manual jointer on the last spindle Rollers in the tabletop Electric pressure beam adjustment smooth feed speed control up to 36m/min chrome-plated top pneumatic pulling roller clamps

Weinig Unimat 30 EL four-sided planer - German production - year of production 2001 - for wet wood - pneumatic cushion - counter reading 4808 h - DTR TECHNICAL PARAMETERS: - planing width 300 mm - planing height 200 mm - spindle diameter 50 mm 1 lower spindle 11 kW 2 right spindle 11 kW 3 left spindle 11 kW 4 upper spindle 11 kW cutter adjustable at an angle of 0.75 kW 5 lower spindle 15 kW 6 upper spindle 11 kW - jointer 7 lower spindle 7.5 kW - jointer - spindles with brakes - feed motor 7.5 kW - feed speed smoothly adjustable 6-36 m/min - four pull rollers in the tabletop - six upper steel pulling rollers - three upper rubber pulling rollers - feed on cardan shafts - pneumatic pressure - air cushion in the countertop - automatic central lubrication - minimum element length 700 mm - diameter of connectors 5 x 160 mm, 2 x 140 mm, 1 x 80 mm Machine di ...

– German production –DTR – for wet wood – hydrohebel TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm rollers in the countertop pulling spindle diameter 1-4 - 40 mm spindle diameter 5-6 - 50 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW feed motor power 4 kW feed adjustable smoothly on the inverter 5-26 m/min jointers on the last two heads five upper steel pulling rollers four top rollers rubber pulling four rollers in the countertop pulling pneumatic pressure feed on cardan shafts electric brakes electric height adjustment length of the pre-worktop 1950 mm connection diameter 140 mm dimensions of the machine (L/W/H) 685 / 230 / 230 cm weight 4000 kg

CATALOG NO. 6946 TECHNICAL SPECIFICATIONS - max width of the workpiece 210mm - max thickness of the workpiece 120mm - number of spindles 2 pcs - spindle diameter 50mm in advance: - 3 insertion, pulling, rubber, smooth shafts including 2 double - 2 leading, rubber, pulling shafts including 1 double - heads on supports - head adjustment up / down - electric height adjustment of the upper head - electrical setting of planing thickness - spindles equipped with a brake - main motor 2×5,5kW - smooth regulation of feed speed - feed motor 3kW - feed on cardan shafts - diameter of extraction connection 2x160mm - dimensions length / width / height 2350x1780x1950mm - weight 1882kg – German production – jointers – for sharpening knives on the head – 2 Hydro heads included – unpainted – very good condition, used planer Net price: 33900 PLN Net price: 7533 ...

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung:1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle- horizontale Wellen mit Gegenlager / Hydrospannung- obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellbar  ...