pressure:500 t
passage width:1600 x 1300 mm
stroke:1100
mm
Table size:1600 x 1300 mm
open height:1700 mm
Press
speed:25,2 - 9,4 mm/sec
Approach Speed:300 mm/sec
return
speed:200 mm/min
machine dimensions LxWxH:2800 x 1800 x 7200
mm
Weight (approx.):55 t
Description of the press frame
The frame is designed as a frame construction with 2 operating
sides. It consists of highly dimensioned braces, which are tightly and
rigidly welded with upright steel ribs. The complete welding part is
processed on precision machines.
As a stiff box construction. The
underside of the box is formed by a solid welded steel plate, which is
prepared for the assembly of insulation and heating plates. The
complete welding part is processed on precision machines.
Integrated guide and cylinder connections in a power optimised
design.
Plunger Guide The plunger is guided diagonally through a
prism guide, i.e. the angle of the guide is designed so that the
contact surfaces run parallel to the diagonals of the press
table.
This arrangement guarantees a consistent guiding game, as
the guide surfaces move along their line of gravity at temperature
differences of the frame and plunger. The design of the guide is
completely force-and form-fit, so that no torque or force is applied
to the fastening of the guide jaws. This means that the guide can be
adjusted very precisely and works with high accuracy. The length of
the guide is chosen in relation to the width of the table so that it
can be dispensed with.
The sliding pairing is special bronze
against steel. Lubrication is carried out via lubricant generator.
Hydraulic unit the hydraulic system is located in the upper part
of the press frame. It is completely piping, connected and mounted.
The hydraulic unit consists of a high pressure pump with drive
motor, as well as all the components required to function the press;
In addition, auxiliary and control drives are used.
Proportional
valves are installed for the lifting and lowering movements. The short
pressure build-up time in connection with the specified press speed
leads to the use of a storage station. Appropriate times and cycles in
the process must be taken into account when loading the storage
station. Details see technical data.
Safety Equipment The press
complies with the applicable safety regulations according to UVV, as
well as the standards valid for the EU, in the latest version for the
scope of delivery described.
2.3 Electric Press Control
S7/OP27-The controller is operated on the basis of a PLC manufacturer
Siemens (S7) with a Control Panel Siemens op 27.
-The press is
FABR with a measuring system. BALLUFF.
-The switch cabinet with
control power and safety part is positioned to the right of the press.
Max distance to press 5 m
Germany
Werk Portugal 