Dowel and slotted hole drilling machine HOFFMANN DÜBELFIX DBL
very good condition, the machine comes from a small carpenter's shop,
everything is in original condition, the machine has only been
cleaned
this allows slotted holes to be milled and dowel holes to be drilled
on 2 levels without reclamping
380V, 1500W
Speed: 2850 rpm
Year of manufacture 1991
with the machine you can mill slotted holes for e.g. lock boxes and
similar things, make all kinds of frame and dowel connections at right
angles, blunt and mitred
ideal for the production of dowel joints in timber frame construction,
furniture, doors, windows and stairs construction and for similar
things
by drilling on 2 levels, by the grids and stops and by the
construction of the machine, dowel connections are made in the
shortest possible time, which makes the machine very economical
the machine requires a compressed air connection of 6bar (the air
consumption is very low)
Clockwise
Mills and drills very well and cleanly
with 2 angle stops, which are integrated in the machine table and 2
additional stops on the left and right side of the table outside, in
addition you get a round stop rail, 2000mm long with folding stop,
this stop rail can be used on both sides, when changing from one side
to the other, the folding stop does not have to be readjusted
The workpiece clamping is carried out with 2 pneumatic clamping
cylinders, the switches are directly on the clamping cylinder
the height adjustment from one drilling level to the other is also
pneumatic, the pneumatic switch for this is located at the top of the
adjustment lever for the grid, which ensures quick adjustment of grids
and the drilling levels
with a precision 12mm grid rail, which has a center grid and 12 grids
left and right
The 2 drilling planes each have a scale with altitude indicator, which
allows for easy, fast and accurate height adjustment of each drilling
level
can be quickly converted to slotted milling machines, the machine can
then be used without a grid with 2 adjustable stops on the left and
right and then has a width of max. 320mm
the machine has a stop rail at the front of the machine table, which
can be adjusted downwards if necessary
The max. drill hole height is approx. 150mm
the max. drill hole depth is approx. 120mm, with drilling depth stop,
The max. workpiece height is approx. 250mm
Everything works perfectly
the machine will be delivered and demonstrated by us personally for
220.00 euros throughout Germany, so you have no risk when buying,
delivery to Austria and the EU is also possible on request
The machine table is 800mm wide and 250mm deep
Professional equipment, no DIY store scrap
with description
you can start working with the machine immediately
with 2-jaw drill chuck up to 20mm
Very stable and durable construction
the precision guides with the backlash-free ball bearing bushings are
OK and go easily
Very stable and torsion-resistant construction