We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Swivelling sliding table saw F45 from Altendorf with 2-axis scorer in fantastic condition Sliding table length 3200mm Virtually no cuts and major scratches in the sliding carriage Saw blade swivel from 0 to 45.5 degrees 3000, 4000, 5000 and 6000 rpm speeds with electric speed display Reinforced drive motor 7.5kW with automatic motor brake Saw blade diameter up to 350mm, without scoring blade also 400mm possible Cutting height max. 125mm Cutting width up to 1050mm Swivel angle and height adjustment hydraulically adjustable Cut-to-length ruler up to approx. 3200mm Mitre ruler can be tilted up to 45 degrees Width stop can be folded down Suction nozzle 80 + 120mm, combined to 160mm Sliding carriage lockable (BOLT), which means that even large panels can be placed on top Handle Hemming shoe 1 used plastic saw blade with 2-axis scorer 3 splitting wedges 2-axis scoring un ...
used
PART NUMBER 8006 SPECIFICATIONS - max diameter of the main disc with a scoring scoring rod 350mm - max diameter of the main blade without a scoring rod 450mm - cutting height with the blade in place: 350mm, 100mm - electric adjustment of the main disc up/down + angle - Electric angle display - electric adjustment of the undercut up/down, right/left - spindle diameter 30mm - Spindle locking - with a sliding trolley - cutting length on a trolley 3400mm - cutting width at the guide 1300mm - with sidecar - with an undercutter - max scoring diameter 120mm - spindle diameter 22mm - 0.75kW scoring motor - main motor 5.5kW - 4 types of rotational speed - electronic speed display - Diameter of the extraction port 120mm, 80mm - table top dimensions 1220x730mm - Table top dimensions with widening 1440mm - Table top dimensions with extension 2060mm - shield cover - dim ...
used
Sawblade tiltable: nein °Length of the rolling table: 2800 mmcutting width: 1250 mmMotor output: 5,5 kWCutting height: 125 mmCutting height at 45°: mmSaw blade diameter: 400 mmSpeed: U/min.weight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Sawblade tiltable: - °Length of the rolling table: 2.500 mmcutting width: 1.000 mmMotor output: 4,0 kWCutting height: 130 mmCutting height at 45°: - mmSaw blade diameter: 400 mmSpeed: 3/4/5/6.000 U/min.weight of the machine ca.: 970 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Saw blade diameter: 400 mmCutting height: 130 mmcutting width: 700 mmCutting height at 45°: mmSpeed: U/min.Sawblade tiltable: °Length of the rolling table: mmsawing motor: 6,0 kWweight of the machine ca.: 1,1 tdimensions: 2,3 x 1,6 x 1,6 msliding table saw- incl. suction unit- further accessories see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Saw blade diameter: 400 mmCutting height: 130 mmcutting width: 700 mmCutting height at 45°: mmSpeed: 5000 U/min.Sawblade tiltable: °Length of the rolling table: mmsawing motor: 5,5 kWweight of the machine ca.: 0,85 tdimensions: 3,0 x 1,5 x 1,2 mSliding table saw- 10,000 mm parallel stop- Table length 30,000 x 1,500- See pictures for additional accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Sawblade tiltable: 45 °Length of the rolling table: 3.000 mmcutting width: 800 mmMotor output: 7,5 kWCutting height: ca. 180 mmSaw blade diameter: 500 mmSpeed: 3/4/5/6000 U/min.weight of the machine ca.: ca. 1.000 kg: Nein : Digital, DigitX : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Altendorf F45 Sliding Table Saw with Reinforced Motor and Spraying Device Used sliding table saw Altendorf F45 with reinforced motor for sawing non-ferrous metals and spraying device. Manufacturer: Wilhelm Altendorf Model No.: F45 Machine Type: Sliding Table Saw Year of Make: 1991 Cutting length: 3,000 mm Motor: Reinforced saw motor for machining non-ferrous metals Sliding table: aluminium format sliding carriage Rip Stroke: Available Cross Stop: Available Spraying device: For lubrication and cooling during sawing Spraying Device Actuation: Via Amber Circuit Operation: Manual Condition: Used
used
Sliding Table Saw Table Saw Circular Saw Carpenter Saw Altendorf Type: F45 Year: 1978 Sliding table length: 280 cm Trimming width/ rip fence approx.: 80 cm Parallelogram Guard with Top Extraction Hood Boom table with cut-to-length stop Miter stop Motor power: 5.5 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. the indicated shipping costs are an approximate price, depending on the distance and unloading option, they may vary. Please inquire. The item offered is offered with differential taxation. The sales price shown is the gross final amount. An invoice with VAT will not be issued. ...
used
Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition
used
Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition
used
used
Gebr. Sliding table saw ALTENDORF WA80 Year 2005 Motor power: 5.5 kW Scoring unit: 0.75 kW 45° swivel Height and swivel adjustment: electric Digital display for swivel Sliding carriage length: 3.20 m Cutting width rip fence: 1.30 m Max. saw blade diameter: 400 mm max. cutting height: 130 mm 4 speeds: 3.0 / 4.0 / 5,000 rpm Suction nozzle: 120 + 80 mm Weight: approx. 850 kg The saw comes from a 1-man operation. Manufacturer information
used
used
Fields K7 Sliding table saw Motor power: 400V 7 KW, 50HZ Format sliding table: 2.3 m Cutting height: 103mm Saw blade: swivel, max. 315mm WJ-400105 Boom Table with Telescopic Stop Folding Stops Upper protective hood Year of manufacture 1997
used
Sawblade tiltable: 45 °Length of the rolling table: 2.800 mmcutting width: 1.250 mmMotor output: 7,3 kWCutting height: 140 mmSpeed: 4.000 U/min.: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop
new
Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...
used
Connected load 380V 10A Motor power 4kW Edging table length 1600 mm Saw Blade-D. 315 mm Cutting height 90 mm Extraction 1x120mm 1x60mm (on extraction hood) Cutting width 1000 mm Table extension 400x400mm Rip fence with fine adjustment Edging frame with angle mitre stop Manual lifting and swivelling of the saw blade Saw blade tilt indicator 1x switch for direct starting of the main engine Saw blade protection cover
used
400 V, 50 Hz, 2.2 Kw, Cutting height 100 mm, Cutting width 500 mm (extension table + 900 mm added, but the customer shortened the round bar from the rip fence), Sliding table 2600 mm, max. saw blade 315mm, Work table 1060x330 mm, Table extension 390x330 mm, Table extension 900x810 mm, Boom table 1050x630 mm, Cut-to-length stop up to 2800 mm, Height and angle adjustment manually, Extraction connection 100 mm, Hold Operating tools, Spare straps
used
Sawblade tiltable: 45 °Length of the rolling table: 1.800 mmcutting width: 1.050 mmMotor output: 4,5 kWCutting height: 135 mmCutting height at 45°: 90 mmSaw blade diameter: 400 mmSpeed: 3.000 / 4.000 / 6.000 U/min.weight of the machine ca.: 750 kg: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Sliding table saw Martin T 65 Heavy precision sliding table saw 3.5" LCD color screen Motor 5.5 kW Saw blade tiltable 0 - 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm Parallelogram transverse stage, for inclination on both sides up to 46°, LCD displays, 0.01° fine adjustment for cutting angle Analogue length stop with 2-point system Trimming length 3,000 mm Cutting width with rip fence 1,100 mm Width stop adjustment via handwheel Reading width stop via control CE version Machine is WORKSHOP overhauled in TOP condition from small business ex location
used
SPECIFICATIONS: Carriage length: 3000 mm Saw blade: max. Ø 500 mm - with scoring blade max. Ø 400 mm Scoring blade: max. Ø 120 mm Manual height/tilt adjustment 45° Stop with retractable system Digital measurement for height - inclination - stop width Pitching power: 0.75 kW Sawing power: 5.5 kW EQUIPMENT: Miscellaneous Accessories Angle cutting device 0° - 90°
used
Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A
used
MARTIN T73 Automatic Year 2002 Main sawing unit: 5.5 kW Rated current: 15 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 - 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Parallel fence can be lowered manually + suction arm can be moved max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor Top control panel Central lubrication Fixed degree setting on the transverse table (grid) Pull-out support on the transverse table Compressed air supply required Extraction connection: 120 + 100 mm Weight: approx. 1950 kg
used
Panhans sliding table saw With saw blade that can be swivelled on both sides Type V90 Year of construction 2009 Saw blade swivel plus/minus 45.5° Sliding carriage length 3200 mm Cutting width 1250 mm Cutting width electrically adjustable according to measurement input Motor power 7.5 kW, brake motor Electric lifting/lowering/swivelling with memory programs Speed infinitely adjustable With scoring Cutting height maximum 180 mm Saw blade diameter maximum 500 mm With wide hood for 45° cuts Dimensions 3300 mm x 3500 mm Weight 1400 kg
new
Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table
used
TECHNICAL DATA: Table dimensions: 1100 x 1100 mm Saw blade: Ø 350 mm Saw blade inclination: 0 – 45° Installed power: 5.5 kW INCLUDED IN DELIVERY: 01 3-roller drive with speed controller
used
Connected load 380V 6.1A 3.8kW Saw blade diameter max. 315 mm Weight approx. 330 kg Length of trimming carriage 2150 mm Speed 4000 rpm Suction nozzle 100 mm Cutting width 1100 mm Angle stop Rip fence
used
Connected load 380V 15.8A Saw motor 5.5kW Scoring motor 1.2kW Electric height adjustment Electric swivel with LED display Length of trimming carriage 3000 mm Cutting width 1200 mm PSV with narrow hood Table extension 1000 x 470 mm Scoring pneumatically height-adjustable
used
Connected load 380V Main motor 7.5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram protection device with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric swivel with Siko indicator Extraction connection 1x100mm 1x120mm
used
Sawblade tiltable: 45 °Length of the rolling table: 3.200 mmcutting width: 1.340 mmMotor output: 7,5 kWCutting height: 150 mmCutting height at 45°: 106 mmSaw blade diameter: 450 mmSpeed: 2.350 - 5.200 U/min.weight of the machine ca.: ca. 1.100 kg: Variabel - Stufenlos : Elektrisch : Elektrisch : Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
WEIBERT WJ-K315-A Sliding table saw Format sliding table: 3000mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A