We offer
Kaeser compressed air system consisting Schraubenkompressor.SC 1211,
dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter SG
0192, Sigma compressed air management system, Kaeser oil-water
separation system and control cabinet
The compressed air system is used to supply compressed air to a
production hall. It was built or extended from 1995 - 2016 and is
fully functional, in good condition and is offered for sale by our
customer due to the restructuring of the hall use.
The system must be serviced and inspected before it can be put back
into operation.
The system consists of the following components:
1.
Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate
air intake duct from outside and inside with flap control
2,
Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar
3.
Compressed air tank flamco STAG 3000 l 16 bar Year 1995 704 kg
4.
Piping with Ultrafilter SG 0192,
5,
Control system: SIGMA Air Manager Basic
6
Oil-water separation system Kaeser
7.
Control cabinet Standart Rittal PS 4884
Technical data on the components
To 1 photo 1-2
Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate
air intake duct from outside and inside with flap control
- Model: Screw compressor Kaeser CS 121
with air intake duct from the outside and inside with flap control
LANDIS & GYR SQR 65.1 Damper Actuator
- Year of construction: 1995
- Machine No.:1210362
- Operating hours:- electric. 37756 / Compr. 20546
- Permissible, operating pressure:12bar
- Operating temperature:75-85°C
Engine
- Nominal power: 75kW
- Engine speed: 1475 1/min
- Degree of protection: IP 54
- Maxmal switch-on frequency/hour: 8
Electrical connection
- Mains voltage/frequency: 400V 3~,PE 50 Hz
- Back-up fuse time-lag or BK g: 180 A
Settings
- Setting pressure:11.2bar
- Switch-off pressure: 12bar
- Operating pressure max :14 bar release pressure safety valve
12bar connection: 230/380V 75kW
Oil Filling Quantity
- Total capacity :70l
- Oil :S46 by Kaeser
- Dimensions over all : compressor only approx. 1950 x 1275 x 1450
mm
- Weight: 1520 kg
Accessories
- Documentation / Declaration of Conformity
Re 2.
Adsorption dryer 1 Kaeser DC 75 with 2 desiccant tanks Year:2015 Photo
3-4
- Volume: 133l
- Filling weight: 100kg
- Adsorption Center: Activated Aluminum Oxide Al2O2
- P0 & PS 0/16 bar
- TO -10/+66 °C
- TS +70°C
- PT 26.1bar
- Year of construction:2016
- Machine No.: 9,5486,20010-1037
-Hours:-?
- Max operating temperature air:0° C
- Ambient temperature 2-45°C
- DL inlet temperature min/max +2/+50 °C
- Volume flow at 20°C compressed air intake temperature and 1bar abs.
450m³/h / 7,5m³/min
- Pressure dew point -40°C
- Connection: 240V 1N /PE50 Hz 0.2-0.5A
- Dimensions: 2000x1200x800mm +distributor
- Construction: Clad
- Weight: 504kg
Re 3.
Compressed air tank Flamco STAG 3000 l 16bar 60°C Photo 5-6
- Manufacturer: Flamco STAG Behälterbau Genthin
- Model: 3000l
- Year of construction:1995
- No.: 59457
-Ab. Operating pressure:16bar
-Ab. Cleaning temperature: 50°C
- Type marking ZU 295/6
- Dimensions: D 1200xH 3000mm estimated
- Weight: 704kg
zU 4.
Piping with Ultrafilter SG 0192 Photo 7-11
Ultrafilter
Boiler No. 4774/937
Model designation: LU200/5
Year of construction:1995
Pressure:16bar
Temperature:120 °C
To 5..
Compressed Air Management System Sigma Photo
Kaeser Sigma Air Manager SAM Basic see photos 13-15
Data will be added
To 6.
Oil-water separation system Photo16-1
Kaeser 5.22673.0
To.7.
Control cabinet Rittal PS 4884 photo 18-20
Standard Control Cabinet
The parts of the compressed air system are also individually tendered
separately.
Another adsorption dryer 2 Kaeser DC 75 E built in 2016 available
We sell the assets on behalf of our customers. The offer prices are to
be understood as gross prices in EURO ex works. The offers are subject
to change, errors excepted and subject to any prior sale. In this
context, we expressly refer to our terms and conditions. We would also
like to point out that we offer a return, a guarantee and a warranty
with regard to the products offered by us.
Germany
